Panasonic AGCK10Pの取扱説明書

41ページ 1.44 mb
ダウンロード

ページに移動 of 41

Summary
  • Panasonic AGCK10P - page 1

    Arbitrator-CP ver.1.9 Basic Operation [For Officers] ...

  • Panasonic AGCK10P - page 2

    Arbitrator-CP Basic Operation for Officers -Contents- (1) Control Reference Guide z Front Camera (AG-CK10P) z P2 Recorder-VPU (AG-CPD15P) z Control Panel (AG-RCP30P) z Control Panel - User Friendly Design z Digital Wireless Microphone (TDSS-900-PNA) (2-a) Control Panel Menu for Officer (for non LPR users) (2-b) Camera Menu for LPR (License Plate Re ...

  • Panasonic AGCK10P - page 3

    Backlight compensation to make it brighter T(TELE) for Zoom In W(WIDE) for Zoom Out *Keep pressing this button for more than 2 seconds will stop recording. Rear panel LED Control Auto Zoom Camera Control Connector for VPU (1) Control Reference Guide Front Camera (AG-CK10P) REC Start and STOP SUN Shade REC LED Lights up in RED while recording ...

  • Panasonic AGCK10P - page 4

    (1) Control Reference Guide P2 Recorder - VPU (AG-CPD15P) REC button REC LED STOP button READY lamp Lights up when recording is ready BUSY lamp Lights up or flashes while a P2 card is accessed. Key Lock Locks and unlocks the P2 Card slot cover P2 card slot cover P2 card slot 1, 2 ...

  • Panasonic AGCK10P - page 5

    LCD Screen Auto Zoom Book Mark Backlight Compensation T: Zoom In W: Zoom Out REC/STOP Lamp Skip (Back/Forward) REC Button Live/Archive Switching Button STOP Button Audio 2 Mute Button/Lamp Mute Audio 2 and lamp lights on by pushing this butto n. No recording while muting (lights on) Control Panel ON/OFF Return To go back to prev ious menu or settin ...

  • Panasonic AGCK10P - page 6

    Live Control Mode Buttons Admin/Archive Control Mode Buttons (1) Control Reference Guide Control Panel (AG-RCP30P) - User Friendly Design 1. High Priority Buttons for Live Control Mode on the left side for easy access High Priority Buttons REC, STOP, Zoom in/out, Bookmark Auto Zoom, Backli ght compensation 2. The Same REC/STOP Button Size as that o ...

  • Panasonic AGCK10P - page 7

    (1) Control Reference Guide Digital Wireless Microphone TX and RX (TDSS-900-PNA) Transmitter (TX) With Receiver (RX) Transmitter (TX) Talk ON : Green LED BATT : Red -In charging, Green -Fully charged Beep Tone Talk Button: Press for REC Mute Button Mode Selection Button Lavalier Mic Input Built-in Mic Regarding Mode and Indicati on of LED Buttons, ...

  • Panasonic AGCK10P - page 8

    (1) Control Reference Guide Version 1.0 : Digital Wireless Microphone TX Mode Talk Push REC Low Battery Out of Range Mute Push Off On BEEP Blue on Blue blink Red on Red blink fast Red off blink Vibration Blue off Blue off Red on Red blink fast Red off blink B+V Blue on Blue blink Red on Red blink fast Red off blink No Indication Blue off Blue off R ...

  • Panasonic AGCK10P - page 9

    Mode Talk Push REC Low Battery Out of range Mute Button Push OFF ON Mode 1 BEEP Blue OFF Blue ON Blue Blink Fast Blue LED OFF Beep ON Blue LED OFF Blink Slow Mode 2 Vibration Blue OFF Blue OFF Blue OFF Blue LED OF F Vibr ON Blue LED OFF OFF Mode 3 B+V Blue OFF Blue ON Blue Blink Fast Blue LED OFF B+V ON Blue LED OFF Blink Slow Mode 4 No Indication ...

  • Panasonic AGCK10P - page 10

    Mode Talk REC Low Battery Out of range Mute Push Off On Vibration Blue on Blue blink Red on Red Blink Red off No Vibration Blue off Blue off Red off Red off Red off Talk button Mute button Mode button (1) Control Reference Guide Version 1.5.3 : Digital Wireless Microphone TX Indication of LED BUTTON: TDSS-900 TX Version 1.5.3 Serial No: 071104659 a ...

  • Panasonic AGCK10P - page 11

    When appeared in Cont rol Panel OSD , execute “Resto re” [Camera] For users who do not use LPR (Lic e nse Pl ate Recognition mode) (“Init LPR Mode” in Admin s et up is “Dis able” as a factory default.) *For LPR users, pl ease g o to ”Camera M enu for LPR” for details (2-a) Control Panel Menu for Officer Adjust manual focus Adjust im ...

  • Panasonic AGCK10P - page 12

    (2-b) Camera Menu for LPR (License Plate Recognition) In order to use LPR (License Plate Recogniti on) mode, the Administrator needs to set up “Init LPR Mode” as “Enable” in Admin/Camera menu. *If setting up “Init LP R Mode ” as “ Di sable ”, there will be no “LPR Mode”, “LPR/Patrol Shutter Sp eed ”, “LPR/P atr ol Zoom” ...

  • Panasonic AGCK10P - page 13

    (3) Record the video (Live Mode) Press REC button for (1) Control Panel, (2) Camera (Rear Panel) , or (3) VPU (P2 Recorder) *If the trigger is set, VPU will start recordi ng automatically when the trigger is on. <Camera> <Control Panel> <VPU-P2 Recorder> ...

  • Panasonic AGCK10P - page 14

    (4) Playback the recorded video (Archive Mode) (a) Press “Live/Archive” button of Control Panel to playback the video. (Playba ck starts from the lo cation wher e pl ayba c k was last ma de. Or if the recording was started or stopped prior to pressing “Liv e/Archiv e” button, playbac k starts from the b eginning of the file.) Or (b) Press ? ...

  • Panasonic AGCK10P - page 15

    (5) Camera Control (a) Zoom “W”: Zoom Out “T”: Zoom In (b) Auto Zoom Press “Auto Zoom” button of Control Panel or Camera. (c) IR Mode Press “IR Mode” button switch in g to IR “Auto”, “On”, “Off” Auto Zoom W: Zoom Out T: Zoom In IR Mode ...

  • Panasonic AGCK10P - page 16

    (6) Officer Information Register at the beginning of shift & delete at the end of shift (A) Register the Off icers inform ation (At the beginning of shift) (1) “Auto”: Plug USB memo ry (saved the officer information) to VPU. (2) “Manual”: Plug USB memory to VPU and press “Loa d” button. If 2 officers need to b e loaded, p l ug 2 dif ...

  • Panasonic AGCK10P - page 17

    Arbitrator-CP ver.1.9 Basic Set up & Operation [For Administrators] ...

  • Panasonic AGCK10P - page 18

    Arbitrator-CP Basic Set up & Operation for Administrator -Contents- (1) -Before Use, Format 16GB P2 Card -16GB P2 Card Format by Products / Combination with Windows version (2) Control Panel Menu for Administrator (3) REC/Play Set up by Administrator (4) Camera Control - Auto Zoom / IR Set up by Administrator (5) Control Panel Key Lock (6) On S ...

  • Panasonic AGCK10P - page 19

    (1) Before use, Format 16G P2 card z Formatting 16G P2 card is mandato ry at th e first time usage. z When modified (copy, delete, move etc) fo lders in P2 Card, pl ease format the card. (If you copy the folders/ files from 5 slot P2 drive or PC PC MCIA to PC HDD, please format the card.) z The format of 16G P2 card is available by Control Panel, 5 ...

  • Panasonic AGCK10P - page 20

    Format by How to format? SI (FE Application) By S I Menu, go to “Confi g”-”Operations”-”Format”. Control Panel By Control Panel Menu, go to “Setup Info”-”Admin ”-”File Manageme nt”- ”Format” 5 slot P2 Drive (AJ-PCD20P) Before format, install the P2 driver (from “P2 ICV Filter w/ P2 Drivers” CD included in Arbitrator ...

  • Panasonic AGCK10P - page 21

    (2) Control Panel Menu for Administrator [Setup/Info] [Top Menu] [Admin] Page 1/2 Record /Play mode set tings Officer R egi stration Trigger (8GP IO) settings Camer a s etti ngs Management mode For Officer Regi str ation (Auto, Manual, List) Export or Delete fil e s Format files Date and Time settings [Admin] Page 2/2 On Scree n Display settings to ...

  • Panasonic AGCK10P - page 22

    (3) REC/Play Set up by Administrator Power off time setting after shutting do wn the ignition Initial camera set ting, camera 1 or 2 Initial Audio 2 se tting, IN CAR or 2 nd WMIC or LINK CAM Start reco rding w hen VPU is tur ned on Setting: Off Fixe d 1 fps (fra me per sec) recording Recording mode: F-2Mbps (72 0x48 0, 30fps) F-1Mb ps (720x480, 10f ...

  • Panasonic AGCK10P - page 23

    (4) Camera Control-Auto Zoom / IR Set up by Administrator [Admin] Page 1/2 From Control Panel Top Menu --”Setup info”—”Adm in” Adjust “Zoom Limit”, “x22” for optical or “x220” for digital 1. Adjust “Auto Zoom Magnific a tion” selectin g from “1 ,2,3,4,5,7,10,15, or 22” 2. Adjust “Auto Zoom” Time for zoom magnificat ...

  • Panasonic AGCK10P - page 24

    (5) Control Panel Key Lock All buttons except buttons in circle “REC” “Cursor Button” “Menu” “Return” “Control Panel On/Off”, “REC” on both VPU and Camera will be locked. [Key Lock by Admin ] From Control Panel Top Menu --”Setup info”—”Adm in” [Key Lock by Officer ] From Control Panel Top Menu --”Setup info”— ...

  • Panasonic AGCK10P - page 25

    (6) On Screen Type set up by Officer / OSD set up by Administrator [Top Menu] On Screen Type set up by Officer, “AUTO”, “SIMPLE”, “DETAILS” or “OFF” *1. See more detail s on “Live mode on screen ty pe” and “Archive mode on scre en type”. *2. On Scree n Ty pe will NOT be reco rded in the re cording file. [Setup/Info] [Admin] ...

  • Panasonic AGCK10P - page 26

    (6-a) Live Mode On Screen Type [SIMPLE] (1) (5) (3) (2) (4) (6) (7) (1) Remaining P2 ca rd re cor ding time (2) Mode indication ( P ause, Record) (3) Status Displ ay PON: Power On Recordi ng “ON” CARD FULL: No space on P2 c ard CARD PROTECT: The write-protect s witch of P 2 card i s set to protect VUP CARD: Recording i s not poss i bl e due to ...

  • Panasonic AGCK10P - page 27

    (6-b) Archive Mode On Screen Type [SIMPLE] (1) (5) (3) (2) (4) (6) (7) (1) (3) (4) (1) Play back fil ename (Lo cal time a t st art of recording) (2) Mode ind ication ( Playback, Pause, FF RW Slow) (3) P layback Speed a nd Sta tus D isplay <Playback Spee d> x1/10 , x1/2, x4, x20, x200 <Status Display > READ ERROR: An error occurre d whil ...

  • Panasonic AGCK10P - page 28

    (7) Trigger (a) Set up by Administrator (1) Go to “Trigger” in “Admin” menu by Control Panel. (2) Select “Action” w hich you need when detect ing the trigger signal (Trigger 1 to 8). Trigger On or Off setting Select “Ac tion” from the followings for the detec tion of trigger signa ls “REC” “STOP ” “AUTOZOOM” “CAM1” ? ...

  • Panasonic AGCK10P - page 29

    (7) Trigger (b) Stop recording by Trigger OFF Stop Recording by Trigger OFF Detection (Level Signal Setting) REC Continue T ime (Timer Setting) Stop Recording Priority No (“Continue”) 1) “STOP” button is pressed. 2) Trigger OFF 1) “STOP” button is pressed. 2) Trigger OFF 3) “REC Continue Time” “STOP” button is pressed. 1) “STO ...

  • Panasonic AGCK10P - page 30

    (8) Menu (VPU settings) Copy (1) Plug an USB memory * to the VPU w hich settings n eed to be copied to ot her VPUs. (2) Go to “Operations” i n “Admin” menu by Control Panel and select “Menu Copy”. (3) Press “Copy” butto n if yo u agree to co py menu settings to the USB memory. *This action cre ates a se tting configuration fil e in ...

  • Panasonic AGCK10P - page 31

    USB Memory (9) Event Type for Bookmark (a) Create an Event Type text and register it to VPU Plug an USB memory to PC EvType1=Criminal Arrest EvType2=Traffic Stop EvType3=DUI ● ● ● EvType10=Drinking Check (a) Plug the USB memory stored the event ty pe file “evtype.txt” to VPU. (b) Go to “Registration” in “Admin” menu by Control Pan ...

  • Panasonic AGCK10P - page 32

    (9) Event Type for Bookmark (b) How to Add / Delete the Bookmark? Event Ty pe Loaded to VPU Press “Bookmark” butt on while appears. Press “Bookmark” butt on. w ill appear. NO NO Press “Bookmark” butto n. will appear and select the e vent type. Press “Bookmark” butto n. will a ppear on screen. Add the bookmark Press “Bookmark” b ...

  • Panasonic AGCK10P - page 33

    (10) Officer/Admin Information Set up -Contents- 1. Admin Set up (1) Creating Text Files and Saving in USB memory 2. Admin Set up (2) Text Files for Officer/Admin 3. Admin Set up (3) How to register Officer/Admin information? 4. Admin Set up (4) How to log in “Admin” menu? 5. Admin Set up (5) How to delete Admin/Officer information? 6. Officer ...

  • Panasonic AGCK10P - page 34

    -Officer/Admin Information Set up by Control Panel- Admin Set up (1) Creating Text Files and Saving in USB memory (1) Officer Data File: “wid*****.tx t “ (Up to 8 char a cters for file name , 1 text file p e r officer, Max 2 text fi les) USB Memory (3) Administrator Registration File “wadmin.txt” ( Max. 10 Administ rators) Create “WIDKE ...

  • Panasonic AGCK10P - page 35

    -Officer/Admin Information Set up by Control Panel- Admin Set up (2) Text Files for Officer/Admin (1) Officer Data File: “wid*****.txt “ *With in 8 characters fo r file name, 1 text file per officer , Max 2 text files (2) Officer Registration File: “wofficer.txt” *Max 500 offi cers in 1 text file *Necessary only when usin g “Officer List ...

  • Panasonic AGCK10P - page 36

    -Officer/Admin Information Set up by Control Panel- Admin Set up (3) How to register Officer/Admin information (A) Before registering the Office rs, Administrator needs to set “Management Mod e” in “Admin ” menu such as “Auto”, “Man u al” or “L ist” for Officer registration m ode. (See “Officer Set up (1)”) [Admin] [Setup/In ...

  • Panasonic AGCK10P - page 37

    -Officer/Admin Information Set up by Control Panel- Admin Set up (4) How to Log in “Admin” menu? # James Bond FirstName=James Middle Name= LastName=Bond ID=ICV007 Password=007 How to Log in “Setup/Admin” menu by administrator? (1) Create Officer Data File (wid** ***.txt) that is the same Admin information registered in VPU (2) Save the Offi ...

  • Panasonic AGCK10P - page 38

    -Officer/Admin Information Set up by Control Panel- Admin Set up (5) How to delete Admin/Officer information? How to delete Admin information when Ad min information had registered in VPU? (1) Log in “Admin” menu followed by Admin Set up (4) (2) Create a blank Admi n Registration File (wadmi n.txt) and save it to USB memory. Then, plug USB memo ...

  • Panasonic AGCK10P - page 39

    How to register the Of ficers inform ation at the beginning of the shift? (1) Plug USB memory saved the Of ficer in formation as the file “wid*****.txt” (2) Go to “Officer” by Control Panel menu and Officer Data will be re gistered according to the “Management Mode” set up by Administrator NOTE1: ”Management Mode” in “Admin” m e ...

  • Panasonic AGCK10P - page 40

    How to delete Officers informat ion at the end of the shift? (1) Go to “Officer” by Control Panel me nu. If either “Manual” or “List” in “Management Mo de” is set by Administrator, delete it at “Officer” (2) Please overwrite the n ext one or two officers by USB memo ry saved Officer Data File ( wid*****.txt ) when “Auto” in ...

  • Panasonic AGCK10P - page 41

    Officer Dat a File “ wid*****.txt ” Officer Registration File “ wofficer.txt ” Administrator Registration File: “ wadmin.txt ” 1) Max 500 officers in 1 text file 2) Ne ces sa ry only wh en using “Officer List” m ode 3) Shift time, shift, area and source will NOT be registered. 1) Max 10 Administrator in 1 text file 2) Shift time, sh ...

メーカー Panasonic カテゴリー Digital Camera

Panasonic AGCK10Pのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- AGCK10Pの取扱説明書
- Panasonicの製品カード
- パンフレット
- またはPanasonic AGCK10Pの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Panasonic AGCK10Pの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Panasonic AGCK10Pの取り付け説明書、サービスマニュアル、簡易説明書、またはPanasonic AGCK10Pのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Panasonic AGCK10Pの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Panasonic AGCK10Pデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPanasonic AGCK10Pを使用するのを助ける技術的文書のことです。説明書は通常、全てのPanasonic AGCK10Pユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Panasonicの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Panasonic AGCK10Pの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPanasonic AGCK10Pの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Panasonic AGCK10Pに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Panasonic AGCK10Pデバイスの基本機能を使うにあたってのヒント。 Panasonic AGCK10Pのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Panasonic AGCK10Pに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPanasonic AGCK10Pのメーカー/サービスへの連絡先に関する情報。

Panasonic AGCK10Pについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもPanasonic AGCK10Pの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPanasonic AGCK10Pで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)