-
Star Micronics TCP2000 Series - page 1
THERMAL REWRITE CARD READER / WRITER TCP100/2000 series Installation Guide & Specifications Thank you for choosing the TCP100/2000 Thermal rewrite card system. This “Installation Guide & Specifications” includes very important instructions for safety . Please read this manual before you start the system, and follow the instructions. Sta ...
-
Star Micronics TCP2000 Series - page 2
C • O • N • T • E • N • T • S 1. HANDLING NOTES --------------------------------------------------------- 1 2. OUTLINE ---------------------------------------------------------------------- 4 3. UNP ACKING ------------------------------------------------------------------ 5 4. APPEARANCE AND NOMENCLA TURE ----------------------------- ...
-
Star Micronics TCP2000 Series - page 3
1 HANDLING NOTES At the installation: 1) Install the TCP100/2000 reader/writer on a flat surface. Minimize any shock or vibration to the reader/writer , as shock or vibration may cause injury and/or failure. 2) Keep the TCP100/2000 reader/writer away from hands of the children. 3) Do not use or leave the TCP100/2000 reader/writer in direct sunshine ...
-
Star Micronics TCP2000 Series - page 4
2 During the operation: 1) Do not use any other card but specified by Star Micronics Co., Ltd. It may cause malfunction, failure, etc. 2) Do not use wet or oily stained card. Do not touch card with wet or stained hand. It may cause malfunction, failure, etc. If the card gets stained, please perform cleaning of the card and the unit. (For the clean- ...
-
Star Micronics TCP2000 Series - page 5
3 10) When the unusual (such as noise, stench, smoke, fire, etc.) is found, turn off the power immediately . Then disconnect the plug. If the TCP100/ 2000 reader/writer being kept using, it may cause failure, skin burn, etc. Contact our sales/tech support team for repair . 1 1) Connect and disconnect the power cable only with power turned off and w ...
-
Star Micronics TCP2000 Series - page 6
4 OUTLINE The TCP100/2000 series is a reading/writing device for specified IC card or reading device for ISO magnetic stripe type card. It also has print/erase capability to human readable area on the surface of the card. This series is compatible with most host computers and various P .O.S. systems. (TCP2000 series does not support for IC card.) T ...
-
Star Micronics TCP2000 Series - page 7
5 2 5 4 3 1 UNP ACKING After unpacking the unit, check that all the accessories are included in the individual box. Housed unit (TCP100/2000 series) 1 TCP100/2000 unit 2 Power cable 3 Cleaning cards (2 pcs) 4 Cleaning liquid 5 Installation Guide & Specifications (this manual) 3 ...
-
Star Micronics TCP2000 Series - page 8
6 0 6 1 5 4 8 3 7 2 0 A 8 7 9 APPEARANCE AND NOMENCLA TURE Housed unit TCP100/2000 series [TCP100] [TCP2000 back] 1 Switch Cover This cover protects the power switch of the system. Push to open and close. 2 Power Switch This switch turns the power of the system ON/OFF . 3 POWER LED This LED indicates that the power of the system is on. 4 READY LED ...
-
Star Micronics TCP2000 Series - page 9
7 CONNECTION TO EXTERNAL UNITS AND SETTING (Housed unit TCP100/2000 series) <Connecting the interface cable> 1 T urn OFF the power of the host computer and the reader/writer . 2 Plug in an end of the interface cable to the reader/writer connector and the other end to the serial port of the host computer . 3 Fasten two screws located at both t ...
-
Star Micronics TCP2000 Series - page 10
8 Cleaning switch Front cover CLEANING 6-1 Using the cleaning card T wo cleaning car ds and one bottle of cleaning liquid for cleaning the mag- netic head, rollers, etc. are supplied in the enclosed plastic bag. (1) Dimensions of cleaning card (2) Frequency of cleaning 1. Daily or every 300 times of printing. 2. When read/write errors occur continu ...
-
Star Micronics TCP2000 Series - page 11
9 TROUBLE SHOOTING Difficulties when the power is turned ON. Symptom Possible cause Remedy Power LED lamp does notlight up. Power LED lamp light up. Card is not accepted Card is accepted Card is not accepted Card is accepted, but main unit does no t properly run. Power cable is not properly plugged in. Power cable is broken. Power fuse is blown. LE ...
-
Star Micronics TCP2000 Series - page 12
10 TCP100 TCP2000 Card type PVC (thick card) PET (thin card) Card feeding part Driving method Feed roller Card inserting Face up in one direction direction Card feed speed 350mm/s (high speed) 350mm/s (high speed) 40mm/s (low speed) 30mm/s (low speed) Magnetic recording part ISO T rack 1,2 : read ISO T rack1, T rack2, T rack 3 : read/write Track 3 ...
-
Star Micronics TCP2000 Series - page 13
Special Products Operating Div . Card System Sales Section 536 Nanatsushinya, Shimizu, 424-0066, Japan T el: 81-543-47-0122 , Fax: 81-543-48-5013 http://www .star-micronics .co .jp 2000.07 59082055 ...
Star Micronics TCP2000 Seriesについてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもStar Micronics TCP2000 Seriesの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがStar Micronics TCP2000 Seriesで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。