-
Futuretech 250 - page 1
© Copyright Nachdruck v erboten! Reproduction prohibite d! Réproduction interdit! Prohibida toda reproduc ción. Für weiteren Gebrauch aufb ewahren! Keep this manual for future needs! Gardez ce mode d’e mploi pour des utilisations ultérieures! Guarde este ma nual para posteriores us os. BEDIENUNGSANLEITUNG USER MANUAL MODE D'EMPLOI MANUA ...
-
Futuretech 250 - page 2
51839250X62NXS_V_1_1_E.DOC 2/15 MULTI-LANGUAGE-INSTRUCTIONS Table of contents EINFÜHRUNG .............................................................................. FEHLER! TEXTMARKE NICHT DEFI NIERT. SICHERHEITS HINWEISE ............................................................ FEHLER! TEXTMARKE NICHT DEFINIERT. BESTIMMUNGSGEM ÄßE VERWEND ...
-
Futuretech 250 - page 3
51839250X62NXS_V_1_1_E.DOC 3/15 INTRODUCTION .......................................................................... FEHLER! TEXTMARKE NICHT DEFINIERT. INSTRUCTIONS DE SÉCURITÉ ................................................. FEHLER! TEXTMARKE NICH T DEFINIERT. EMPLOI SELON L ES PRESCRIPTIONS .................................... FEHLER! TEXTM ...
-
Futuretech 250 - page 4
51839250X62NXS_V_1_1_E.DOC 4/15 USER MANUAL DJ-SCAN 250 DMX-Scanner CAUTION! Keep this device away from rain and moisture! Unplug mains lead before opening the housing! For your own safety, please read this user manual car efully before y ou initial start-up. Every person involved with the installation, operation and mainte nance of this device has ...
-
Futuretech 250 - page 5
51839250X62NXS_V_1_1_E.DOC 5/15 If the device has been exposed to drasti c temperature fluctuation (e.g. afte r tran sportation), do not switch it on immediately. The arising condensation wate r might damage your device. Leav e the device switched off until it has reached room temperature. This device falls under protection-cl ass I. The power plug ...
-
Futuretech 250 - page 6
51839250X62NXS_V_1_1_E.DOC 6/15 The maximum ambient temperature t a = 45° C mu st never be exceeded. Operate the device only afte r having become familiar wi th its functions. Do not permit operation by persons not qualified for operating the device. Most dama ges are the result of unprofessional ope ration! Please use the original packaging if th ...
-
Futuretech 250 - page 7
51839250X62NXS_V_1_1_E.DOC 7/15 Overview (1) Mounting bracket (2) Fixation screw (3) Safety eyelet (4) Objective-lens/Focus (5) Mirror (6) Housing cover (7) Housing screws (8) DMX-Out socket (9) DMX-In socket (10) Power supply (11) Fuseholder (12) Blackout-socket (13) Control Board (14) Venting slots (15) Control LED (16) Microphone (17) Mode-butto ...
-
Futuretech 250 - page 8
51839250X62NXS_V_1_1_E.DOC 8/15 INST ALLA TI ON Installing/Replacing the lamp DANGER TO LIFE! Only install the lamp with the device switched off! Unplug from mains before! For the installation, you need one MSD/HS D 200 GY-9 .5, MSD/HSD 250 GY-9.5 or MSD 25 0/2 GY-9.5 lamp. The lamp must only be changed when wearing appropriate protective clothing ...
-
Futuretech 250 - page 9
51839250X62NXS_V_1_1_E.DOC 9/15 Lamp adjustment The lampholder is aligned at the factory. Due to differences between lamps, fine adjustment may improve light performance. Strike the lamp, open the shutter, set the dimmer intensity to 100 % and focus the light on a flat surface (wall). Center the hot-spot (the brighte st part of the beam) using the ...
-
Futuretech 250 - page 10
51839250X62NXS_V_1_1_E.DOC 10/15 Caution: Devices in hanging install ations may cause severe injurie s when crashing down! If you have doubts concerning the safety of a possi ble installation, do NOT install the device! Before rigging make sure that the installation area can hold a minimum point load of 10 time s the device's weight. DANGER OF ...
-
Futuretech 250 - page 11
51839250X62NXS_V_1_1_E.DOC 11/15 Occupation mono 1/4“ jack-plug: Tip In Phase (+) Ground Sleeve DMX-512 connection / conn ection between fixtures The wires must not come into contact with each other, other wise the fixtures will not work at all, or will not work properly. Only use a stereo shi elded cable and 3-pin X LR-plugs and connecto rs in o ...
-
Futuretech 250 - page 12
51839250X62NXS_V_1_1_E.DOC 12/15 The occupation of the connection -cables is as follows: Cable Pin International Brown Live L Blue Neutral N Yellow/Green Earth The earth has to be connected! If the device will be directly connected with the local pow er supply network, a disc onnection switch with a minimum opening of 3 mm at every pole has to be i ...
-
Futuretech 250 - page 13
51839250X62NXS_V_1_1_E.DOC 13/15 Note: After switching on, the DJ-SCAN 250 will automatically detect wheth er DMX 512 data is received or not. If the data is received, the control LED flashes. If there is no d ata received at the DMX-input, the control LED lights up permanently. This situation can occur if: - the 3 PIN XLR plug (cable with DMX sign ...
-
Futuretech 250 - page 14
51839250X62NXS_V_1_1_E.DOC 14/15 Control channel 5 - Gobo rotation DMX-value Feature 0-15 No rotation 16-135 Forwards gobo rotation with de creasing spee d 136-255 Backwards gobo rotation with in creasing speed Control channel 6 - Shutter, strobe DMX-value Feature 0-5 Shutter closed 6-128 Dimmer control 129-131 Reset (after 3-5 seconds) 132-139 No ...
-
Futuretech 250 - page 15
51839250X62NXS_V_1_1_E.DOC 15/15 quantity of oil must not be excessive in order to av oid that oil runs out when the gobo-wheel rotate s. There are no serviceable part s inside the device. Maintenan ce and service operations are only to be carried out by authorized dealers. Please refer to the instructions under "In stalling/Replacing the lamp ...
Futuretech 250についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもFuturetech 250の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがFuturetech 250で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。