日本語 dropdown-ico

IBM Modbus Plusの取扱説明書

22ページ 0.03 mb
ダウンロード

ページに移動 of 22

Summary
  • IBM Modbus Plus - page 1

    Modbus Plus X-Link Driver User’s Guide Version 1.22 50 Northland Road Waterloo, Ontario, CANADA N2V 1N3 Tel: (519) 725- 5136 Fax: (519) 725-1515 www.sstech.on.ca ...

  • IBM Modbus Plus - page 2

    Modbus Plus X-Link Driver User’s Guide 36 Publication Revision: 1.22 Publication Date: January 15, 1999 This document applies to the Modbus Plus X-Link Driver (SA85.DRV). Copyright © 1999 SST, a division of Woodhead Canada Limited All rights reserved. No portion of this document may be reproduced in any form without the prior written permission ...

  • IBM Modbus Plus - page 3

    Modbus Plus X-Link Driver User’s Guide 37 Contents 1. Introduction ........................................................... 39 1.1 What is the Modbus Plus Driver? ............................. 39 1.2 Why Do I Need This Manual? .................................. 40 1.3 How Do I Use This Manual? .................................... 41 1.4 Where ...

  • IBM Modbus Plus - page 4

    Modbus Plus X-Link Driver User’s Guide 38 ...

  • IBM Modbus Plus - page 5

    Introduction 39 1 Introduction 1.1 What is the Modbus Plus Driver? The Modicon Modbus Plus X-Link driver allows the X-Link to transfer data to or from devices on the Modicon Modbus Plus network. ...

  • IBM Modbus Plus - page 6

    Modbus Plus X-Link Driver User’s Guide 40 1.2 Why Do I Need This Manual? This manual describes the communication requirements and capabilities of the Modbus Plus driver, the configuration parameters for the driver and the mappings possible for the Modicon PLCs. It provides troubleshooting information and technical specifications that can be refer ...

  • IBM Modbus Plus - page 7

    Introduction 41 1.3 How Do I Use This Manual? The following conventions will help you better understand and use the material in this manual. Text you type appears in Courier font. For example, “Type mkdir C:XLINK to make a new X-Link directory.” Menu Names are italicized. You choose menu options. For instance, “Choose the X -Link/New... comm ...

  • IBM Modbus Plus - page 8

    Modbus Plus X-Link Driver User’s Guide 42 1.4 Where Can I Find More Help? If you have a question or problem that the manuals or on-line help do not address, you can contact X-Link Technical Support by mail, fax or email, or by phone during regular business hours (EST). X-Link Technical Support SST, a division of Woodhead Canada Limited 50 Northla ...

  • IBM Modbus Plus - page 9

    Communication 43 2 Communication Once configured, the X-Link emulates a station on the Modbus Plus network. It can send messages to other stations and receive messages from other stations. This section outlines the requirements and compatibilities of this communication. ...

  • IBM Modbus Plus - page 10

    Modbus Plus X-Link Driver User’s Guide 44 2.1 Requirements To communicate to the Modbus Plus network, the X-Link requires a Modicon SA85 card. The X-Link Modbus Plus driver supports either the redundant or non-redundant version of the SA85. Installation and cabling requirements are detailed in the SA85 user manual, Modicon IBM Host Based Devices ...

  • IBM Modbus Plus - page 11

    Configuration 45 3 Configuration When you download a driver to the X-Link, you must set configuration parameters to control the interface between the driver and the required hardware. This section details the configuration parameters for the Modbus Plus driver. ...

  • IBM Modbus Plus - page 12

    Modbus Plus X-Link Driver User’s Guide 46 3.1 Configuration Parameters The Modbus Plus driver is distributed in the file SA85.DRV. Once the SA85.DRV is loaded into the X -Link, the following parameters are required: Card Segment The memory address for the SA85 card. The card requires 2K of memory in the range of C000 to EF80. Default is D000, sec ...

  • IBM Modbus Plus - page 13

    Mappings 47 4 Mappings Once the X-Link has been loaded, you can create mappings to transfer data from one network to the other. This section outlines the mapping options supported by the Modbus Plus driver. For information on what mappings are or how they work, please refer to the X-Link User's Guide . ...

  • IBM Modbus Plus - page 14

    Modbus Plus X-Link Driver User’s Guide 48 4.1 Data Ty pes and Lengths The Modbus Plus Driver supports three X-Link data formats; Bits and Integers, as well as Floats. The Modbus Plus protocol does not support floating point. The driver will truncate any floating point numbers before transmission, and expand the integer numbers to floating point a ...

  • IBM Modbus Plus - page 15

    Mappings 49 4.2 Source Accesses The Modbus Plus driver supports four possible source accesses. The first source defines a local address which allows any device on the Modbus Plus network to write the data to the X-Link. This type of source is ideal for data that changes infrequently, but must be forwarded immediately, such as errors or exceptions. ...

  • IBM Modbus Plus - page 16

    Modbus Plus X-Link Driver User’s Guide 50 4.3 Destination Accesses The Modbus Plus driver supports three possible destination accesses. The first destination defines a local address which allows any device on the Modbus Plus network to read the data from the X-Link. This type of destination can be used to allow a PLC to read back the data it has ...

  • IBM Modbus Plus - page 17

    Mappings 51 4.4 Local Addresses When a mapping is created which allows a PLC to access data within the X -Link, a local address dialog box must be completed. The information required to complete a local address definition is the class of data to access (Coils, Input Status, Input Registers or Holding Registers) and the offset into the data table. I ...

  • IBM Modbus Plus - page 18

    Modbus Plus X-Link Driver User’s Guide 52 4.6 Status Counters The status counters are maintained within the Modbus Plus driver for logging events and errors. The Status menu allows you to monitor some of these counters. As well, the status counters can be accessed as a data source for mappings. The Modbus Plus driver status counters include count ...

  • IBM Modbus Plus - page 19

    Troubleshooting 53 5 Troubleshooting If you cannot communicate with your X-Link, refer to the troubleshooting section in the X-Link User's Guide. If you can communicate with your X-Link, but cannot monitor the status of your Modbus Plus driver, you most likely have the memory address set incorrectly. Refer to your SA85 User Manual to confirm y ...

  • IBM Modbus Plus - page 20

    Modbus Plus X-Link Driver User’s Guide 54 ...

  • IBM Modbus Plus - page 21

    Specification 55 6 Specification 6.1 Driver CMOS Storage Requirements Driver Code and Parameters 16 Kbytes Each Global Data Read Address 4 bytes Each Global Data Write Address 3 bytes Each Internal Address 5 bytes Each External Address 10 bytes Each Status Counter Address 2 bytes ...

  • IBM Modbus Plus - page 22

    Modbus Plus X-Link Driver User’s Guide 56 ...

メーカー IBM カテゴリー Computer Drive

IBM Modbus Plusのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- Modbus Plusの取扱説明書
- IBMの製品カード
- パンフレット
- またはIBM Modbus Plusの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、IBM Modbus Plusの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、IBM Modbus Plusの取り付け説明書、サービスマニュアル、簡易説明書、またはIBM Modbus Plusのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、IBM Modbus Plusの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

IBM Modbus Plusデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがIBM Modbus Plusを使用するのを助ける技術的文書のことです。説明書は通常、全てのIBM Modbus Plusユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

IBMの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. IBM Modbus Plusの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははIBM Modbus Plusの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。IBM Modbus Plusに関してこのドキュメントで見つけることができる全てのヒントの目次
3. IBM Modbus Plusデバイスの基本機能を使うにあたってのヒント。 IBM Modbus Plusのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。IBM Modbus Plusに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるIBM Modbus Plusのメーカー/サービスへの連絡先に関する情報。

IBM Modbus Plusについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもIBM Modbus Plusの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがIBM Modbus Plusで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)