ページに移動 of 131
Operation Manual Multi-CD control DSP High power D VD-A/D VD-V/ VCD/CD/MP3/WMA/A AC/DivX/JPEG player with FM/ AM tuner A VH-P7850D VD English ...
Thank you for buying this P ioneer product. Please rea d through these oper ating instructions so you will know how to operate your model properly. After you have finished r eading the instr uctions, k eep this man- ual in a safe place for futu re r eference. Be sure to read this ! Playable discs 8 ! DVD video disc region numbers 8 ! When an operat ...
PBC playback 38 F rame-by-frame playback 39 Slow motion playback 39 Searching for a desired scene, starting playback from a specified time 39 Introduction of advanced Video CD operation 40 Repeating play 40 Selecting audio output 40 Playing CDs Listening to a CD 41 Selecting tracks from the track title list 41 Displaying text information on CD TEXT ...
Connecting a Bluetoo th audio player 59 Disconnecting a Bluetooth audio player 60 Displaying BD (Bluetooth Device) address 60 Bluetooth T elephone Hands-free phoning with cellular phones featuring Bluetooth wireless technology 61 Setting up for hands-free phoning 62 Basic operation of hands-free phoning 62 Introduction of advanced hands-free phonin ...
Setup Introduction of setup adjustments 96 Setting the A V input 96 Setting the automat ic open function 97 Adjusting the LCD panel slide position 97 Setting the clock 98 Setting the video of rear display 98 Switching the dimme r setting for sub- display 98 Adjusting the contrast for the sub- display 98 Changing languages for CAUTION 98 Setting up ...
IMPORT ANT SAFEGUARDS Please read all of these instructions regarding your display and retain them for future refer- ence. 1 Read this manual fully and carefully be- fore operating your display . 2 Keep this manual handy as a reference for operating procedures and safety informa- tion. 3 Pay close attention to all warnings in this manual and follow ...
When you attempt to watch a DVD, Video CD or TV while driving, the warning Viewing of front seat video source while driving is strictly prohibited. will appear on the front display . T o watch a DVD, Video CD or TV on the front display , park your vehicle in a safe place and apply the parking brake. When using a display connected to REAR DISPLA Y O ...
About this unit CAUTION ! Do not allow this unit to come into contact with liquids. Electrical shock could result. Also, this unit damage, smoke, and overheat could result from contact with liquids. ! “ CLASS 1 LASER PRODUCT ” This product contains a laser diode of higher class than 1. T o ensure continued safety, do not remove any covers or at ...
The illustration below shows the regions and corresponding region numbers. About this manual This unit features a number of sophisticated functions ensuring superior reception and op- eration. All the functions have been designed for the easiest possible use, but many are not self-explanator y . This operation manual will help you benefit fully fro ...
NTSC, P AL, P AL-M (for South America) and SECAM (for Russian) compatibility This unit is NTSC/P AL/P AL-M/SECAM system compatible. When connecting other compo- nents to this unit, be sure components are compatible with the same video system other- wise images will not be correctly reproduced. Dolby Digital EX/DTS-ES compatibility Y ou can enjoy th ...
The Windows Media ™ logo printed on the box indicates that this unit can play back WMA data. WMA is short for Windows Media Audio and refers to an audio compression technology that is developed by Microsoft Corporation. WMA data can be encoded by using Windows Media Player version 7 or later . ! Windows Media and the Windows logo are trademarks o ...
For viewing LCD comfortably Due to its construction, the viewing angle of the LCD screen is limited. Y ou can adjust it by changing either screen size or picture adjust- ment. Changing the wide screen size By changing the screen size from 4:3 to 16:9, you can adjust the screen so that the screen can fit to the video image you are playing. F or deta ...
2 Press RESET with a pen tip or other pointed instrument. RESET button Note After completing connections or when you want to erase all memorized settings or return the unit to its initial (factory) settings, switch your engine ON or set the ignition switch to ACC ON before pressing RESET . Feature demo mode The feature demo automatically starts whe ...
! The remote control may not function prop- erly in direct sunlight. Important ! Do not store the remote control in high tem- peratures or direct sunlight. ! Do not let the remote control fall onto the floor , where it may become jammed under the brake or accelerator pedal. Before Y ou Start En 14 Section 02 ...
Head unit 1 DISPLA Y button Press to turn the information display on or off when the video is displayed. 2 PGM button Press to operate the preprogrammed func- tions for each source. (Refer to Using the PGM button on page 110.) 3 FLIP DOWN button Press to turn the LCD panel horizontal tem- porarily from upright position. 4 Ambient light sensor Sense ...
b SOUND SETTING button Press to select the sound setting. c REAR ON button Press to switch between the video sources (such as DVD or AV ) on rear display . d 2ch/MUL TI-CH button Press to switch between the multi-channel output and 2-channel output. Press and hold to switch between the dis- plays on the sub-display. e SOURCE button, VOLUME This uni ...
Remote control Button names AV H mode DVD mode with remote control code AVH 1 Remote control selection switch Switch to change the setting of the remote control. For details, refer to Setting re mote con- trol code type on page 102. 2 SOURCE button Press to cycle through all the available sources. Press and hold to turn the source off . 3A T T butt ...
Button names AV H mode DVD mode with remote control code AVH 6 2ch/MUL TI-CH button Press to switch between the multi-cha nnel output and 2-chann el output. 7 RETURN button Press to display the PBC (playback control) menu during PBC playback. 8 Dolby/DTS but- ton Press to switch between surround soun d setting (Dolby Pro Logic II or DTS Neo:6). 9 a ...
Button names AV H mode DVD mode with remote control code AVH 18 PLA Y/P AUSE ( f ) button Press to switch sequentially between playback and pause. REVERSE ( m ) button Press to perform fast reverse. FORW ARD ( n ) button Press to perform fast for ward. PREVIOUS ( o ) button Press to return to the previous track (chapter). NEXT ( p ) button Press to ...
% When you want to operate the follow- ing functions, switch the mode to DVD: ! When operating the DVD menu by using the joystick. (Refer to Operating the DVD menu on page 32.) ! When browsing still pictures by using the joystick. (Refer to Browsing still pictures on page 33.) ! When operating the PBC menu by using 0 – 10 . (Refer to Watching a V ...
T urning the unit on and selecting a source 1 1 1 1 Source icon Shows which source has been selected. Y ou can select a source you want to listen to. If DVD DISC AUTO is turned on, load a disc in the unit to switch to DVD (refer to Switching the automatic disc playback on page 104). % When using the touch panel keys, touch the source icon and then ...
Adjusting the volume % Use VOLUME to adjust the sound level. With the head unit, rotate VOLUME to in- crease or decrease the volume. With the remote control, press VOLUME to in- crease or decrease the volume. T urning the unit off % When using the touch panel keys, touch the source icon and then touch OFF. # When the source icon is not displayed, y ...
T ouch panel key basic operation Activating the touch panel keys 2 1 1 1 1 TIL T ( / ) keys T ouch to adjust the LCD panel angle. 2 T ouch panel keys T ouch to do various operations. 1 T ouch the screen to activate the touch panel keys corresponding to each source. The touch panel keys appear on the display . # T o go to the next group of touch pan ...
3 T ouch ESC to return to the display of each source. Operating the menu by using the joystick Y ou can also per form most of the menu items by using the joystick. ! Switch the remote control operation mode to AV H to operate the menu by using the joystick on the remote control. (Refer to page 19.) 1 Click the joystick during display of each source ...
! When adjusting the LCD panel angle, be sure to touch TIL T ( / ). Forcibly adjusting the LCD panel by hand may damage it. % T ouch TIL T ( / ) to adjust the LCD panel to an easily viewable angle. The LCD panel angle continues changing as long as you touch TIL T ( / ) and hold. # The adjusted LCD panel angle will be memor- ized and automatically r ...
3 Put the front panel into provided pro- tective case for safe keeping. Attaching the front panel 1 Make sure the inner cover is closed. 2 Align the top of the front panel to the unit. 3 Press the bottom of the front panel until it is clicked. Note In the following cases, remove the front panel and then attach it again: ! When nothing appears in th ...
! If bookmark function is on , DVD playback re- sumes from the selected point. For more de- tails, refer to Resume playback (Bookmark) on page 33. ! If a disc contains a mixture of various media file types such as DivX and MP3, you can switch between media file types to play. Refer to Switching the media file type on this page. ! If you cannot inse ...
Listening to the radio 1 1 1 3 3 3 4 4 4 6 6 6 2 2 2 5 5 5 These are the basic steps necessar y to operate the radio. More advanced tuner operation is explained starting on the next page. 1 Source icon Shows which source has been selected. 2 Source name Shows the selected source name. 3 Band indicator Shows to which band the radio is tuned when FM ...
Introduction of advanced tuner operation 1 1 Function display Shows the function names. 1 T ouch AV MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. 2 T ouch ESC to return to the frequency display . # T o return to the previous display , touch BACK . T uning in strong ...
W atching a DVD video 1 1 1 4 4 4 5 5 5 2 2 6 6 6 3 3 3 7 9 9 9 8 8 8 a a a These are the basic steps necessar y to play a DVD video with your DVD player . More ad- vanced DVD video operation is explained start- ing on page 36. 1 Source icon Shows which source has been selected. 2 DVD-V indicator Shows when a DVD video is playing. 3 Title number in ...
4 T o perform fast forward or reverse, keep touching o or p . If you keep touching o or p for five sec- onds, the icon m or n changes into rever- sal indication. When this happens, fast reverse/fast for ward continues even if you re- lease o or p . T o resume playback at a de- sired point, touch f . # Y ou can also per form fast reverse/fast forwar ...
1 T ouch the source icon and then touch DVD to select the DVD player . # If no disc is loaded in the unit, you cannot se- lect DVD (DVD player). Insert a disc in the unit. (Refer to page 26.) # With some discs, a menu may be displayed. (Refer to Operating the DVD menu on this page.) 2 T ouch KEY to display the touch panel keys. # When KEY is not di ...
Browsing still pictures Y ou can browse still pictures recorded on the disc during DVD audio playback. ! Y ou cannot operate Slideshow . (R efer to Sli- deshow on page 127.) 1 T ouch BROWSE to browse still pictures during playback. 2 T ouch P AGE – or P AGE + to switch still pictures. T ouching P AGE + goes to the next still picture. T ouching P ...
Slow motion playback This lets you slow down playback speed. % Keep touching until is displayed during playback. The icon is displayed, forward slow motion playback begins. # Y ou can adjust playback speed by pressing q or r on the remote control during slow mo- tion playback. # T o switch between groups of touch panel keys, touch NEXT or PREV . # ...
! Display indications such as Dolby D and Mch indicate the audio system recorded on the DVD. Depending on the setting, playback may not be with the same audio system as that in- dicated. ! T ouching AUDIO during fast for ward/fast re- verse, pause or slow motion playback returns you to normal playback. Changing the subtitle language during playback ...
Introduction of advanced DVD operation 1 1 1 1 Function display Shows the function names. 1 T ouch AV MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. 2 T ouch ESC to return to the playback dis- play . # T o return to the previous display , touch BACK . Repeating play ...
Selecting audio output When playing DVD video discs recorded with LPCM audio, you can switch the audio output. ! This function is not possible when disc playback has been stopped. % T ouch L/R SELECT on the function menu to select the audio output. T ouch L/R SELECT repeatedly until the desired audio output appears in the display . ! L+R – left a ...
W atching a Video CD 1 1 1 3 3 3 4 4 4 2 2 5 5 5 6 These are the basic steps necessar y to play a Video CD with your DVD player . More ad- vanced Video CD operation is explained start- ing on page 40. 1 Source icon Shows which source has been selected. 2 VideoCD indicator Shows when a Video CD is playing. 3 T rack number indicator Shows the track n ...
2 T ouch 0 — 9 corresponding to a menu number and then touch ENTER to start playback. Playback starts from the selected menu item. 3 T ouch ESC to hide the touch panel keys. Notes ! Y ou can display the menu by touching dur- ing PBC playback. For details, refer to the in- structions provided with the disc. ! PBC playback of Video-CD cannot be can ...
Introduction of advanced Video CD operation 1 1 Function display Shows the function names. 1 T ouch AV MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. 2 T ouch ESC to return to the playback dis- play . # T o return to the previous display , touch BACK . Repeating play ...
Listening to a CD 1 1 1 3 3 3 4 4 4 6 6 6 2 2 2 5 5 5 These are the basic steps necessar y to play a CD with your DVD player . More advanced CD operation is explained starting on the next page. 1 Source icon Shows which source has been selected. 2 CD indicator Shows when a CD is playing. 3 Disc title indicator Shows the title of the currently playi ...
Introduction of advanced CD operation 1 1 1 1 Function display Shows the function names. 1 T ouch AV MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. 2 T ouch ESC to return to the playback dis- play . # T o return to the previous display , touch BACK . Repeating play T ...
Listening to MP3/WMA/AAC 1 1 1 4 4 4 5 5 5 8 8 8 2 2 2 6 6 6 3 3 3 7 7 7 These are the basic steps necessar y to play an MP3/WMA/AAC with your DVD player . More advanced MP3/WMA/AAC operation is ex- plained starting on page 45. 1 Source icon Shows which source has been selected. 2 ROM-Audio indicator Shows when a compressed audio (MP3/ WMA/AAC) fil ...
Selecting tracks from the file name list File name list lets you see the list of file names (or folder names) and select one of them to playback. 1 T ouch PREV or NEXT to switch between the lists of names. # When the list of file names is not displayed, touch LIST . 2 T ouch your favorite file name (or folder name). That selection will begin to pla ...
Introduction of advanced built-in DVD player (MP3/ WMA/AAC) operation 1 1 1 1 Function display Shows the function names. 1 T ouch AV MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. 2 T ouch ESC to return to the playback dis- play . # T o return to the previous display ...
W atching a DivX/JPEG 1 1 1 3 3 3 4 4 4 7 7 7 2 2 2 5 5 5 6 6 6 These are the basic steps necessar y to play a DivX/JPEG with your DVD player . More ad- vanced DivX/JPEG operation is explained start- ing on page 50. 1 Source icon Shows which source has been selected. 2 DivX/JPEG indicator Shows the type of file currently playing. 3 Folder number in ...
Notes ! This DVD player can play back a DivX file re- corded on CD-R/RW/ROM and DVD-R/RW/ ROM. (Refer to page 119 for files that can be played back.) ! This DVD player can play back a JPEG file re- corded on CD-R/RW/ROM. (Refer to page 118 for files that can be played back.) ! Playback is carried out in order of file number . Folders are skipped if ...
Selecting files from the file name list File name list lets you see the list of file names (or folder names) and select one of them to playback. 1 T ouch PREV or NEXT to switch between the lists of names. # When the list of file names is not displayed, touch LIST . 2 T ouch your favorite file name (or folder name). That selection will begin to play ...
2 T ouch 0 — 9 to input the desired num- ber . # T o cancel the inputted numbers, touch C . # T o select 1 hour 11 minutes, convert the time into 71 minutes 00 seconds and touch 7 , 1 , 0 and 0 in that order . # Y ou can also input the desired number by using the joystick and 0-9 . 3 T ouch ENTER. This starts playback from the selected part. Chan ...
Introduction of advanced built-in DVD player (DivX/ JPEG) operation 1 1 Function display Shows the function names. 1 T ouch AV MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. 2 T ouch ESC to return to the playback dis- play . # T o return to the previous display , tou ...
Listening to a CD 1 1 1 3 3 3 4 4 4 7 7 7 2 2 2 5 5 5 6 6 6 Y ou can use this unit to control a multi- CD player , which is sold separately . These are the basic steps necessar y to play a CD with your multi-CD player . More advanced CD operation is explained starting on page 53. ! This unit does not have a disc title input function. ! Only those f ...
% T ouch f to turn pause on. Playback of the current track pauses. # T o turn pause off , touch f again. Selecting tracks from the track title list T rack title list lets you see the list of tracks on a disc and select one of them to play back. When playing a CD TEXT disc, track titles are displayed. 1 T ouch LIST to display track list. Each time y ...
Introduction of advanced multi-CD player operation 1 1 1 1 Function display Shows the function names. 1 T ouch AV MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. 2 T ouch ESC to return to the playback dis- play . # T o return to the previous display , touch BACK . Rep ...
3 When you find the desired track (or disc) touch SCAN again. # After track or disc scanning is finished, nor- mal playback of the tracks will begin again. Using compression and bass emphasis Y ou can use these functions only with a multi- CD player that supports them. Using COMP (compression) and DBE (dy- namic bass emphasis) functions lets you ad ...
Erasing a track from your ITS playlist Y ou can delete a track from your ITS playlist if ITS play is on. If ITS play is already on, skip to step 2. 1 Play the CD with the track you want to delete from your ITS playlist, and tur n ITS play on. Refer to Playback from your ITS playlist on the previous page. 2 T ouch ITS MEMOR Y on the function menu. 3 ...
Listening to songs on your iPod 1 1 1 3 3 3 4 4 4 8 8 8 2 2 2 6 6 6 7 7 7 5 5 5 Y ou can use this unit to control an iP od adapter , which is sold separately . 1 Source icon Shows which source has been selected. 2 Source name Shows the selected source name. 3 Song number indicator Shows the number of song played in the se- lected list. 4 Repeat ind ...
# T o go to the next group of list titles, touch NEXT . # T o return to the previous group of list titles, touch PREV . # T o return to the previous menu, touch . # T o go to the top menu of the list search, touch TOP . # If the playback stops for any reason, touch TOP and refine your search for a song. Pausing a song P ause lets you temporarily st ...
Listening to songs on BT Audio (Bluetooth audio player) 1 1 1 3 3 3 2 2 2 4 4 4 If you connect Bluetooth adapter (e.g. CD- BTB100) to this unit, you can control Bluetooth audio player via Bluetooth wireless technology . ! In some countries, CD-BTB100 is not sold on the market. F or details concerning operation, refer to the Bluetooth adapter ’ s ...
1 T ouch the source icon and then touch BT AUDIO to select the Bluetooth audio source. # For this unit to control your Bluetooth audio player it needs to establish a Bluetooth wireless connection. (Refer to Connecting a Bluetooth audio player on this page.) 2 T ouch f . Playback starts. # When you want to pause a song, touch f again. 3 T o skip bac ...
Note Before you can use audio players you may need to enter the PIN code into this unit. If your player requires a PIN code to establish a connection, look for the code on the player or in its accompa- nying documentation. Enter the PIN code refer- ring to Entering PIN code for Bluetooth wireless connection on page 106. Disconnecting a Bluetooth au ...
Hands-free phoning with cellular phones featuring Bluetooth wireless technology 1 1 1 3 3 3 4 4 4 c c c 2 2 2 6 6 6 7 7 7 8 8 8 9 9 9 a a a b b b 5 5 5 If you use Bluetooth adapter (e.g. CD-BTB100), you can connect a cellular phone featuring Bluetooth wir eless technology to this unit for hands-free, wireless calls, even while driving. ! In some co ...
a Incoming call notice indication Shows when an incoming call has been re- ceived and not checked yet. ! Incoming call notice is not displayed for calls made when your cellular phone is disconnected from this unit. b V oice recognition indicator Shows when the voice recognition function is on (for more details, refer to V oice rec ogni- tion on the ...
Making a phone call V oice recognition 1 T ouch VOICE to turn the voice recogni- tion function on. V oice dial icon appears on the information bar . V oice recognition function is now ready. # T o cancel the voice recognition function, touch VOICE again. 2 Pronounce the name of your contact. T aking a phone call Answering an incoming call 1 When a ...
# If this unit fails to find any available cellular phones, Not Found is displayed. 3 T ouch the device name you want to connect. While connecting, CONNECTING flashes. T o complete the connection, please check the de- vice name ( Pioneer BT unit ) and enter the link code on your cellular phone. If the connection is established, CONNECTED is display ...
2 T ouch DELETE next to the device name you want to delete. A confirmation display appears. T ouch YES to delete the phone. # T o cancel deleting a registered phone, touch NO . Connecting to a registered cellular phone Connecting to a registered phone manually 1 T ouch PHONE CONNECT on the function menu. 2 T ouch DIRECT CONNECT. 3 T ouch the device ...
Calling a number in the Phone Book Important Y ou are required to park your vehicle and set the parking brake in order to per form this operation. After finding the number in the Phone Book you want to call, you can select the entr y and make the call. 1 T ouch PHONEBOOK to display the Phone Book. 2 T ouch SEARCH to display the Phone Book search di ...
Editing phone numbers Important Y ou are required to park your vehicle and set the parking brake in order to per form this operation. 1 T ouch PHONEBOOK to display the Phone Book. 2 Select a Phone Book entry you want to edit. See step two to three on Calling a number in the Phone Book on the previous page for how to do this. 3 T ouch EDIT next to t ...
Using preset numbers Important Y ou are required to park your vehicle and set the parking brake in order to per form this operation. Assigning preset numbers Numbers that you dial frequently can be as- signed to presets for quick recall. Y ou can assign up to 6 frequently called phone numbers to number presets. 1 Select a desired phone number from ...
2 T ouch CLEAR next to the item you want to delete from the memory . Select from the following: ! PHONEBOOK (phone book) ! Dialed Calls (dialed call histor y) ! Received Calls (received call histor y) ! Missed Calls (missed call histor y) ! Preset Dials (preset phone numbers) After selecting a desired item, a confirmation display appears. T ouch OK ...
W atching the television 1 1 1 3 3 3 4 4 4 6 6 6 2 2 2 5 5 5 Y ou can use this unit to control a TV tuner (e.g. GEX-P5750TV (P)), which is sold separately . F or details concerning operation, refer to the TV tuner ’ s operation manual. This section pro- vides information on TV operations with this unit which differs from that described in the TV ...
% When you find a station that you want to store in memory , keep touching one of preset tuning keys P01 — P12 until the beep sounds. The next time you touch the same preset tun- ing key the station is recalled from memor y. # T o switch between P01 — P06 and P07 — P12 , touch PREV or NEXT . # When P01 — P06 and P07 — P12 are not dis- pla ...
Note Storing broadcast stations with BSSM may re- place broadcast stations you have saved using P01 — P12 . Selecting the area group % T ouch COUNTR Y on the function menu to select the area group. T ouch COUNTR Y repeatedly until the desired area group appears in the display . COUNTR Y 1 (CCIR channel) — COUNTRY 2 (IN channel) — COUNTRY 3 (C ...
Playing a disc 1 1 1 4 4 4 6 6 6 a a a 2 2 2 7 7 7 3 3 3 9 9 9 5 5 5 8 8 8 Y ou can use this unit to control a DVD player or multi-DVD player , which is sold separately . F or details concerning operation, refer to the DVD player ’ s or multi-DVD player ’ s operation manual. This section provides information on DVD operations with this unit whi ...
When using the joystick on the remote control, switch the remote control operation mode to AV H . (Refer to page 19.) 4 T o perform fast forward or reverse, keep touching o or p . # Y ou can also per form fast reverse/fast forward by holding the joystick left or right. When using the joystick on the remote control, switch the remote control operati ...
Introduction of advanced DVD player operation 1 1 Function display Shows the function names. 1 T ouch AV MENU and then touch FUNCTION to display the function names. The function names are displayed and oper- able ones are highlighted. 2 T ouch ESC to return to the playback dis- play . # T o return to the previous display , touch BACK . Repeating pl ...
Selecting audio output When playing DVD video discs recorded with LPCM audio, or video CD discs, you can switch the audio output. ! This function is not possible when disc playback has been stopped. % T ouch L/R SELECT on the function menu to select the audio output. T ouch L/R SELECT repeatedly until the desired audio output appears in the display ...
Introduction to built-in DSP features Important W e recommend that you record the settings in the sheet on page 122 after you have completed audio adjustments. DSP modes This unit features two DSP modes: the net- work mode and the stand ard mode. Y ou can switch between DSP modes as desired. Initi- ally , the DSP mode is set to the standard mode. ( ...
! DVD video ! Video CD ! CD (CD -DA) ! DTS-CD ! Compressed audio (MP3/WMA/AAC) files ! DivX video files Note External unit 1 and external unit 2 are set to the same value automatically . Custom settings ( CUSTOM1 , CUSTOM2 and CUSTOM3 ) F ollowing functions can store the settings in the custom settings ( CUSTOM1 , CUSTOM2 and CUSTOM3 ). Custom sett ...
! Customizing the speaker setting ( SPEAKER SETTING ) ! Using the cut-off fr equency ( CUT OFF ) ! Adjusting the time alignment ( TIME ALIGNMENT ) ! Adjusting the speaker output levels ( SPEAKER LEVEL ) ! Adjusting 3-band parametric equalizer ( P ARAMETRIC EQ ) (when selecting multi- channel mode only) ! Adjusting 13-band graphic equalizer ( GRAPHI ...
2 T ouch or to adjust front/rear speaker balance. Each time you touch or it moves the front/rear speaker balance towards the front or the rear . FRONT 25 to REAR 25 is displayed as the front/rear speaker balance moves from front to rear . 3 T ouch or to adjust left/right speaker balance. Each time you touch or it moves the left/ right speaker balan ...
! When selecting 2CH (2-channel mode), you cannot use this function. (R efer to Switch- ing between the multi-channel output and 2-channel output on page 83.) ! If both the front center and the rear speak- ers are set to OFF , you cannot use this function. Recalling surround sound settings % T ouch Dolby/DTS on the audio function menu to select you ...
4 T ouch or to adjust CENTER WIDTH (center width control). Each time you touch or it gradually spreads the center channel sound into the front lef t and right speakers over a range 0 to 7 . 3 is the default and it ’ s recommended for most recordings. 0 places all center sound in the center speaker . 7 places all center sound equally in the left/r ...
Switching the sound settings Y ou can switch the acoustic sound field stored in this unit according to the source you are lis- tening to. F or detailed instructions on creating the acoustic sound field, refer to Intr oduction of sound settings on the next page. % T ouch SOUND SETTING on the audio function menu to switch the sound setting. T ouch SO ...
Introduction of sound settings 1 1 1 1 Sound setting display Shows the sound setting function names. 1 T ouch AV MENU to display the audio function names. The audio function names are displayed and operable ones are highlighted. 2 T ouch ADJ. next to SOUND SETTING to display the sound setting function names. The sound setting function names are dis ...
# T o cancel the selected listening position, touch OFF . Note When you make adjustments to the listening po- sition, the speaker outputs are automatically set for appropriate levels. Y ou can tailor the levels more precisely referring to Adjusting the speaker output levels on page 91. Recalling equalizer curves The equalizer lets you adjust the eq ...
! The center speaker largely determines the sound image and getting the balance right isn ’ t easy . W e recommend reproducing a 2- ch. audio (a CD for example) and getting the balance right among the speakers ex- cept for the center , and then reproducing a 5.1-ch. audio (Dolby Digital or DTS) and ad- justing the center speaker output to the bal ...
# Y ou can adjust parameters for each band of the other speakers in the same way. Note Y ou can store the adjusted setting in memory by using MEMOR Y . For details concerning opera- tion, refer to Storing the adjusted audio settings in memor y on page 93. Adjusting 13-band graphic equalizer F or custom equalizer curves ( CUSTOM1 to CUSTOM3 ), you c ...
Setting the speaker setting Y ou can make a fine adjustment on each speaker installed in your vehicle. Y ou can change the size of each speaker according to the speaker specification. On a spot at which a speaker is not installed, you can set the ad- justment to OFF . The adjustment you made will be memorized into this unit and you can recall it. R ...
Recalling cut-off frequency settings % T ouch CUT OFF on the sound setting menu to select the cut-off frequency set- ting. T ouch CUT OFF repeatedly to switch between the following cut-off frequency settings: CUSTOM1 — CUSTOM2 — CUSTOM3 — AUTO — LAST MEMORY # Y ou can select LAST MEMOR Y only when the adjusted cut- off frequency setting is ...
When front speaker HPF is selected in the network mode Parameter What it does FREQUENCY Selects cut-off frequencies in the fol- lowing order: 50 — 63 — 80 — 100 — 125 — 160 — 200 (Hz) SLOPE Selects slopes in the following order: – 18 — – 12 — – 6 (dB/oct.) T o switch the filter of the front speaker between LPF and HPF , touch ...
2 T ouch ADJ. next to TIME ALIGNMENT on the sound setting menu. # Y ou cannot adjust the time alignment when neither FRONT LEFT nor FRONT RIGHT is se- lected in the position selector mode. 3 T ouch or to adjust the distance be- tween each speaker and the listening posi- tion. Each time you touch or it increases or de- creases the distance. 0.0cm to ...
3 T ouch or to adjust the speaker out- put level. Each time you touch or it increases or de- creases the speaker output level. – 24dB to +10dB is displayed as the level is increased or decreased. # The test tone rotates to the next speaker after about two seconds from the last operation. 4 T ouch STOP to stop the test tone out- put. Notes ! If ne ...
Storing the adjusted audio settings in memory Y ou can store the adjusted audio settings in this unit for later recall. 1 T ouch MEMORY. 2 T ouch any of CUSTOM1, CUSTOM2 or CUSTOM3 to store the adjusted setting. 3 T ouch YES to store the current setting into the selected sound setting. # T o cancel the storage process, touch CANCEL . Editing the na ...
Before operating the auto T A and EQ function ! Carr y out auto T A and EQ in as quiet a place as possible, with the car engine and air conditioning switched off . Also cut power to car phones or portable telephones in the car , or remove them from the car be- fore carr ying out auto TA and EQ. Sounds other than the measurement tone (sur- rounding ...
3 T urn the ignition switch to ON or ACC. If the car ’ s air conditioner or heater is turned on, turn it off . Noise from the fan in the air conditioner or heater may prevent correct auto T A and EQ. 4 Press SOURCE to turn the source off if this unit is turned on. 5 T ouch the screen to display the touch panel keys. 6 T ouch AV MENU and then touc ...
Introduction of setup adjustments 1 1 1 1 Setup menu display Shows the setup function names. 1 T ouch AV MENU and then touch SETUP to display the setup function names. The setup function names are displayed and operable ones are highlighted. 2 T ouch ESC to return to the display of each source. # T o return to the previous display , touch BACK . Se ...
! OFF – No video component is connected ! VIDEO – External video component (such as portable video player) ! B.UP CAMERA – Rear view camera When rear view camera is connected to A V input 2 CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, other- wise screen image may appear reversed. Y ou can install a rear ...
Setting the clock Use these instructions to set the clock. 1 T ouch CLOCK ADJUSTMENT on the setup menu. 2 T ouch 0 — 9 to set the clock. # T o cancel the inputted numbers, touch C . 3 T ouch ENTER. Note T ouching 24h / 12h switches the clock display on the sub-display between 12/24-hour formats. Setting the video of rear display Y ou can select e ...
Introduction of DVD setup adjustments 1 1 1 Y ou can use this menu to change audio, subti- tle, parental lock and other DVD settings. ! When watching a DVD/Video CD on the rear display independently , you cannot op- erate this menu. 1 DVD setup menu display Shows the DVD setup menu names. 1 While playing a disc, touch A V MENU and then touch DVD SE ...
! Y ou can also switch the audio language by touching AUDIO during playback. (Refer to Changing audio language during playback (Multi-audio) on page 34.) ! Even if you use AUDIO during playback to switch the audio language, this does not af- fect the settings here. Setting the menu language Y ou can set the preferred language for dis- plays of menu ...
! Some discs do not enable changing of the TV aspect. For details, refer to the disc ’ s in- structions. Setting the parental lock Some DVD video discs let you use parental lock to restrict children from viewing violent and adult-oriented scenes. Y ou can set the par- ental lock to your desired level. ! When you set a parental lock level and then ...
% T ouch STILL PICTURE on the DVD setup menu to select the setting. T ouch STILL PICTURE repea tedly until the de- sired setting appears in the display . ! AUTO – FIELD or FRAME is selected auto- matically by this unit. ! FIELD – P roduces a stable, generally shake- free image. ! FRAME – P roduces a sharper image, but more prone to shake than ...
Adjusting initial settings 1 1 1 Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit. 1 Function display Shows the function names. 1 T ouch the source icon and then touch OFF to turn this unit off. 2 T ouch the screen to display the touch panel keys. 3 T ouch AV MENU to display the f ...
% T ouch DET ACH W ARNING on the initial menu to turn war ning tone on. # T o turn warning tone off , touch DET ACH W ARNING again. Switching the auxiliary setting Auxiliar y equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliary equipments, refer to Using the AUX s ...
% T ouch DVD DISC AUTO on the initial menu to turn automatic disc playback on. # T o turn automatic disc playback off , touch DVD DISC AUTO again. Resetting the audio functions Y ou can reset all audio functions except vo- lume. Important If you per form this operation, audio settings are erased. F or this reason , we recommend that you record the ...
Note About your country TV signal, consult with your nearest P ioneer dealer . Entering PIN code for Bluetooth wireless connection T o connect your cellular phone to this unit via Bluetooth wireless technology , you need to enter PIN code on your phone to verify the connection. The default code is 0000 , but you can change this in this function. ! ...
Switching the display on the sub-display Y ou can switch between the displays on the sub-display . % Press 2ch/MUL TI-CH and hold to switch the display . Press and hold 2ch/MUL TI-CH repeatedly to switch between the following settings: Source display — clock display — OFF Adjusting the screen Changing the wide screen mode Y ou can select a desi ...
! The adjustments of BRIGHTNESS and CONTRAST are stored separately for light ambient (daytime) and dark ambient (night- time). A sun or moon is displayed to the lef t of BRIGHTNESS and CONTRAST , respectively , as the ambient light sensor de- termines brightness or darkness. ! Y ou cannot adjust HUE for P AL video. ! Y ou cannot adjust HUE for DVD ...
Selecting the background display Y ou can display the thumbnails of available background pictures/visuals and select one to set your background display. The selection can be made each for the audio source group (playing CD, listening to T uner , etc.), telephone source and the movie source group (watching DVD, AV , etc.). 1 Press ENTERT AINMENT. Th ...
Using the AUX source This unit can control an auxiliar y equipment such as VCR or portable device (sold sepa- rately). When connected, auxiliar y equipment is automatically read in as AUX source and as- signed to AUX . About AUX connection method Y ou have two methods to connect auxiliar y equipment to this unit. Stereo mini pin plug cable ( AUX1 ) ...
T roubleshooting Common Symptom Cause Action (See) P ower doesn ’ t turn on. The unit doesn ’ t operate. Leads and connectors are incor- rectly connected. Confirm once more that all connections are correct. The fuse is blown. Rectify the reason for the fuse blowing, then replace the fuse. Be ver y sure to install the correct fuse with the same ...
Symptom Cause Action (See) The icon is displayed, and op- eration is not possibl e. The operation is prohi bited for the disc. This operation is not possible. The operation is not compatible with the disc ’ s organization. This operation is not possible. The picture stops (pauses) and the unit cannot be operated. Reading of data has becom e impos ...
Symptom Cause Action (See) Switching the viewing angle is not possible. The DVD playing does not feature scenes shot from multiple angles. Y ou cannot switch between multiple angles if the DVD does not feature scenes reco rded from multiple angles. Y ou are tr ying to switch to multiple angle viewing of a scene that is not recorded from multiple an ...
Message Cause Action (See) FILE Skipped The inserted disc contains WMA files that are protec ted by DRM Replace disc. PROTECT All the files on the inserted disc are secured by DRM Replace disc. Understanding auto T A and EQ error messages When correct measurement of car interior acoustic characteristics is not possible using the auto T A and EQ, an ...
DVD player and care ! Use only normal, round discs. If you insert irregular , non-round, shaped discs they may jam in the DVD player or not play prop- erly . ! Check all discs for cracks, scratches or warping before playing. Discs that have cracks, scratches or are warped may not play properly. Do not use such discs. ! Avoid touching the recorded ( ...
! Playback of discs recorded on a personal computer may not be possible, depending on the application settings and the environ- ment. Please record with the correct for- mat. (For details, contact the manufacturer of the application.) ! Playback of CD-R/CD-RW discs may be- come impossible in case of direct exposure to sunlight, high temperatures, o ...
! The folder selection sequence for playback and other operations becomes the writing sequence used by the writing software. F or this reason, the expected sequence at the time of playback may not coincide with the actual playback sequence. However , there also is some writing software which per- mits setting of the playback order . ! Some audio CD ...
! This unit doesn ’ t support the following for- mats. — Apple Lossless About folders and MP3/ WMA/AAC files ! An outline of a disc with MP3/WMA/AAC files on it is shown below . Subfolders are shown as folders in the folder currently se- lected. 3 1 2 1 First level 2 Second level 3 Third level Notes ! This unit assigns folder numbers. The user ...
DivX video files ! This unit corresponds to DivX video format implemented in relation to DivX standards. This unit cannot play back DivX Ultra for- mat. ! DivX files without video data cannot be re- cognized as DivX file. ! Depending on the file information composi- tion such as the number of audio stream, there may be a slight delay in the start o ...
! The LCD screen of this unit is exposed in order to increase its visibility within the ve- hicle. Please do not press strongly on it as this may damage it. ! Do not place anything on the display when it is opened. Also, do not attempt to carr y out angle adjustment, or open/close the display by hand. Applying strong force to the display may damage ...
Language code chart for DVD Language (code), input code Language (code), input code Language (code), input code Japanese (ja), 1001 Guarani (gn), 0714 P ashto, Pushto (ps), 1619 English (en), 0514 Gujarati (gu), 0721 Quechua (qu), 1721 F rench (fr), 0618 Hausa (ha), 0801 Rhaeto-Romance (rm), 1813 Spanish (es), 0519 Hindi (hi), 0809 Kirundi (rn), 18 ...
DSP adjustment value recor d sheet Please make a copy of sheet below as desired. Parametric equalizer setting ( P ARAMETRIC EQ ) (when selecting multi-channel mode only) Speaker unit BAND Frequency Level Q.Fac FRONT LEFT LOW MID HIGH FRONT RIGHT LOW MID HIGH REAR LEFT LOW MID HIGH REAR RIGHT LOW MID HIGH FRONT CENTER LOW MID HIGH REAR CENTER LOW MI ...
Cut-off frequency setting ( CUT OFF ) Speaker unit FREQUENCY SLOPE PHASE FRONT LEFT HIGH (netwo rk mode only) — FRONT RIGHT HIGH (network mode only) — FRONT LEFT MID (network mode only) LOW P ASS — HIGH P ASS — FRONT RIGHT MID (network mode only) LOW P ASS — HIGH P ASS — FRONT LEFT (standard mode only) — FRONT RIGHT (standar d mode on ...
T erms AAC AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG 2 and MPEG 4. Aspect ratio This is the width-to-height ratio of a TV screen. A regular display has an aspect ratio of 4:3. Wide screen displays have an aspect ratio of 16:9, providing a bigger picture for exceptional presence and ...
DTS Neo:6 DTS Neo:6 can generate 6.1 channel surround sound from any matrixed stereo source (such as video or TV) and from 5.1 channel sources. It uses both the channel information already encoded into the source, as well as its ownpro- cessing to determine channel localization (with two channel sources, the “ .1 ” subwoofer channel is generate ...
Linear PCM (LPCM)/Pulse code modulation This stands for linear pulse code modulation, which is the signal recording system used for music CDs and DVDs. Generally , DVDs are re- corded with higher sampling frequency and bit rate than CDs. Therefore, DVDs can provide higher sound quality . m3u Playlists created using the “ WINAMP ” soft- ware hav ...
Playback control (PBC) This is a playback control signal recorded on Video CDs (Version 2.0). Using menu displays provided by Video CDs with PBC lets you enjoy playback of simple interactive sof tware and software with search functions. Y ou can also enjoy viewing high- and standard-resolution still images. Region number DVD players and DVD discs f ...
Specifications General Rated power source ............... 14.4 V DC (allowable voltage range: 12.0 V to 14.4 V DC) Grounding system ................... N e g a tive type Head unit: Max. current consu mption ........................................... 3 . 7 A Dimensions (W × H × D): DIN Chassis ..................... 1 7 8 × 5 0 × 16 0 mm N o s e ...
S l o p e .......................... 0 (Pa ss)/ – 6/ – 12 dB/oct Low HPF : Fr e q u e n c y ................ 50/63/80/100/125/160/200 Hz S l o p e .......................... – 6/ – 12/ – 18 dB/oct M u t e .................................... O n / O f f F ront center: HPF : Fr e q u e n c y ................ 50/63/80/100/125/160/200 Hz S l ...
A Angle icon ............................................... . 35, . 100 Aspect ratio .......................................... . 100, . 124 Audio language .................................. . 34, . 49, . 99 B Bonus group ................................................. . 124 Bookmark ........................................................ . 33 ...
PIONEER CORPORA TION 4-1, MEGURO 1-CHOME, MEGURO-KU , T OKY O 153-8654, JAP AN PIONEER ELECTRONICS (USA) INC. P .O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. L TD. 253 Alexandra Road, #04-01, S ...
Pioneer AVH-7850DVDのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- AVH-7850DVDの取扱説明書
- Pioneerの製品カード
- パンフレット
- またはPioneer AVH-7850DVDの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Pioneer AVH-7850DVDの取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Pioneer AVH-7850DVDの取り付け説明書、サービスマニュアル、簡易説明書、またはPioneer AVH-7850DVDのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Pioneer AVH-7850DVDの製品を使用するにあたって最も人気のある説明書を閲覧できます。
Pioneer AVH-7850DVDデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPioneer AVH-7850DVDを使用するのを助ける技術的文書のことです。説明書は通常、全てのPioneer AVH-7850DVDユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Pioneerの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Pioneer AVH-7850DVDの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPioneer AVH-7850DVDの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Pioneer AVH-7850DVDに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Pioneer AVH-7850DVDデバイスの基本機能を使うにあたってのヒント。 Pioneer AVH-7850DVDのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Pioneer AVH-7850DVDに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPioneer AVH-7850DVDのメーカー/サービスへの連絡先に関する情報。
Pioneer AVH-7850DVDについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもPioneer AVH-7850DVDの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPioneer AVH-7850DVDで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。