JVC TK-C215V4Eの取扱説明書

32ページ 関係なし
ダウンロード

ページに移動 of 32

Summary
  • JVC TK-C215V4E - page 1

    DOME CAMERA TK-C210FW TK-C215V4 TK-C215V12 INSTR UCTIONS For Customer Use: Enter below the Se rial No. which is located on the body . Retain this inf ormation for future referen ce. Model No . Serial No. LST0308-001C TK-C210FW/TK -C215V4/TK-C215V12 TK-S215_EN.book Pag e 1 Tuesday, March 2 8, 2006 9:39 AM ...

  • JVC TK-C215V4E - page 2

    2 Intr oduction Informat ion for User s on Disposal of Old Eq uipment [Euro pean Union] This symbol indicates that the electr ical and electronic equi pment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed ov er to the applicable co llection point f or the recycling of electrical and electr ...

  • JVC TK-C215V4E - page 3

    3 I 䢇 The unit is to be powered by a DC 12 V or an AC 24 V po wer supply . 䢇 The unit is to be powered by a UL Listed DC 12 V or an AC 24 V po wer supply . (For U type) 䢇 The AC 24 V and 12 V DC power supply shall conform to the f ollowing: Class 2 only (For USA), Isolated power supply only (F or Europe). 䢇 This installation should be made ...

  • JVC TK-C215V4E - page 4

    4 Intr oduction (continued) These are general IMPORT ANT SAFEGU ARDS and certain items may not appl y to all appliances. 1. Read all of these instructions. 2. Sav e these instructions for later use. 3. All warnings on the product and in the ope rating instr uctions should be adhered to. 4. Unplug this appliance system from the wall outle t before c ...

  • JVC TK-C215V4E - page 5

    5 Thank you f or purchasing this product. (These instructions are for: TK-C210FWE, TK-C215V4U/E, TK-C215V12U/E.) Before beginning to operate this unit, please read the instruction manual carefully in order to make sure that the best possible perf or mance is obtained. 䡵 Realizing a Hi gh Picture Quality This camera realizes 540 TV lines* and S/N5 ...

  • JVC TK-C215V4E - page 6

    6 Intr oduction (continued) Intr oduction Safety P recautions .......................................... 2 Characteristics ................................................ 5 Contents ............................ .............................. 6 Operating Precautions .................................... 7 Name of P ar ts ............................ ...

  • JVC TK-C215V4E - page 7

    7 䢇 T o save energ y , when it is not being used tur n the system’ s power off. 䢇 T his camera has been designed f or indoor use. It cannot be used outdoors. 䢇 Do not install or use the camera in the follo wing places. ● In a place exposed to rain or moisture. ● In a place with vapor or oil soot, f or example in a kitchen. ● In a temp ...

  • JVC TK-C215V4E - page 8

    8 Intr oduction (continued) Camera A Mounting hole (elliptica l) x 4 Use these when mounting the camera to the electrical box. ( A pg. 22) NO TE: When installing the camera onto the electric box, install it using the supplied adaptor ring. B Mounting hol e (round ) x 4 Use these when mounting the camera to the ceiling or wall. ( A pg. 18, 20) C Out ...

  • JVC TK-C215V4E - page 9

    9 Camera (Interior) The picture below shows the camer a when the dome cover and outer case are remov ed. Procedures for remo val. ( A pg. 18 A Embedding the camera to the ceiling B , Step 3. to Step 4. ) J Fastening Screw (x 3) When embedding the camera in the ceiling, turn this screw to secure the camera. This screw belongs to a par t of the ceili ...

  • JVC TK-C215V4E - page 10

    10 Intr oduction (continued) Set the video setting switches on the camer a unit before mounting it. T o set the switches , use a fine-tipped scre wdriver . A [RESET/SPO T] RESET/SPO T button When this button is pressed, the v alue of the white balance or phase adjusted manually is reset to the default v alue. ● When the 2 [SELECT] switch is set t ...

  • JVC TK-C215V4E - page 11

    11 3. [SYNC] Synchr onization system selection swit ch. This switch sets the synchronizing system f or the camera. INT : This is set for internal synchronization LL (Line Lock): The camera’ s vertical synchronization is lock ed to the AC 24 V pow er line frequency . When switching between multiple cameras using a switcher , selecting this mode an ...

  • JVC TK-C215V4E - page 12

    12 Intr oduction (continued) Set the video setting switches on the camer a unit before mounting it. T o set the switches , use a fine-tipped scre wdriver . A [IRIS LEVEL] Iris level adjustment For adjusting the le vel of the automatic aper ture control lens. This adjustment only needs to be made when required. Use t his to accommodate par ticular s ...

  • JVC TK-C215V4E - page 13

    13 2. [SELECT] WHT .BAL./PHASE setting switch. WHT .B AL.: The F [R/B, +/ - ] b uttons are used as [R/B] adjustment buttons . PHASE: The F [R/B, +/ - ] b uttons are used as [+/ - ] adjustment buttons . (Default setting: WHT .BAL.) 3. [SYNC] Synchr onization system selection swit ch. This switch sets the synchronizing system f or the camera. INT : T ...

  • JVC TK-C215V4E - page 14

    14 Installati on and connection Set the video setting switches on the camer a unit before mounting it. T o set the switches , use a fine-tipped scre wdriver . A Function selection switches 1. [BLC] Backlight compe nsation switch. When the object is placed against the light, setting this to A ON B increases the iris aper ture by 1 stop and the objec ...

  • JVC TK-C215V4E - page 15

    15 DC 12 V or A C 24 V power supply cable Connect the DC 12 V or the AC 24 V power supply to the DC 12 V/AC 24 V terminals on the terminal board. T o pre vent connection errors or a cable disconnection, we recommend the use of lug plates for the connections. The f ollowing table shows the connection distances and connection cables pro vided that 2- ...

  • JVC TK-C215V4E - page 16

    16 Installation and conn ection (continue d) NO TE: ● T ur n OFF the power supply to all equipment to be used before making connections . ● Read the Instr uction Manual for each piece of equipment to be used before making connections. CA UTION: P ower consumption of TK-C210FW/TK-C215V4/ TK-C215V12 are different from one another . When installin ...

  • JVC TK-C215V4E - page 17

    17 Getting Started CA UTION: ● When mounting the camera to the ceiling, ensure to wear saf ety glasses to protect the eye from any f alling object. ● Attachment of a embedded cover in the ceiling (recess brack et) may be mandatory in cer tain regions. If this is so , ensure that the embedded cov er (recess brack et) is securely attached before ...

  • JVC TK-C215V4E - page 18

    18 Installation and conn ection (continue d) Embedding the camer a to the ceilin g * Make use of a ceiling material with a thickness between 9.5 mm to 22 mm. 䡵 Setup 1. Open a hole in the ceiling. ( R 120 mm) 2. Draw the fall pre vention wire mounted to the ceiling slab and the cable ou t from the ceiling in adv ance . CA UTION: ● Select a sui ...

  • JVC TK-C215V4E - page 19

    19 䡵 Connecting 1. Attach the f all prevention wire to the camera, followed b y attaching it to the ceiling slab (Fall prevention wire is not included.) 2. Connect the video signal cab le . ( A pg. 14) Lower the co ver and connect the connectors . Upon connecting, cover the connectors using the protection cover . 3. Connect the input po wer suppl ...

  • JVC TK-C215V4E - page 20

    20 Installation and conn ection (continue d) When mounting the camera directly to the ceiling or on th e wall When mounting to a wall, replace areas indicated as “ceiling” in the procedures by “wall”. 䡵 Setup 1. Open a hole in the ceiling. ( R 30 mm) Make us e of the template sup plied to open a ho le. 2. Draw the fall pre vention wire mo ...

  • JVC TK-C215V4E - page 21

    21 4. Connect the video signal cab le . ( A pg. 14) Lower the protection co ver and connect the connectors. Upon connecting, restore the protection cov er to cover the connectors . 5. Connect the input po wer supply cab le . ( A pg. 15) 6. Install the Ferrite core (TK-C210FW onl y) ( A pg. 14) 7. Connect the alarm cabl e . (TK-C215V12 only) ( A pg. ...

  • JVC TK-C215V4E - page 22

    22 Installation and conn ection (continue d) When mounting t h e camera to the electrical box NO TE: Before mounting the camer a to electrical boxes , please consult your nearby JVC authorized dealer for details on the ty pe of electrical box f or which mounting is possible. 䡵 Connecting 1. Align j with the shooting direction when mounting the co ...

  • JVC TK-C215V4E - page 23

    23 Adjusting Im age Upon mounting the camera, adjust the images while checking the actual image. Mounting the test monitor Connect the [MONITOR] terminal of this camera to a test monitor to adjust the camera’s shooting direction, image and fo cus. * The power to the camera body must be ON when adjustments are performed. NO TE: ● The TK-C210FW [ ...

  • JVC TK-C215V4E - page 24

    24 Adjusting Ima ge (continued) Adjusting the field angle/focus/ brightness (Not av ailable on TK-C210FW) Upon deter mining the imaging direction, adjust the field angle, f ocus and iris lev el accordingly . The method of adjustment varies with the camera in use.  TK-C215V4 ( A pg. 24)  TK-C215V12 ( A pg. 25) 䡵 TK-C215V4 Adjusting field ang ...

  • JVC TK-C215V4E - page 25

    25 䡵 TK-C215V12 ● 2 types of angle of view ma y be selected for TK-C215V12. In general, set in a wa y such that the home position shoots a wide range and the alar m position a narrow range. ● Use the alar m input mode selection switch to set the actions when there is an alar m input. ( A pg. 13) CA UTION: ● When setting images on TK-C215V12 ...

  • JVC TK-C215V4E - page 26

    26 Adjusting Ima ge (continued)  Registe ring alarm position For registering the angle of view during monitoring when there is an alar m input. 1. Check that the [ALARM POSITION] indicator light is turned o n. Registration of alarm position is enabled. ● Press the [POSITION SELECT] button if the [ALARM POSITION] indicator light is off. 2. Adju ...

  • JVC TK-C215V4E - page 27

    27 As a general characteristic unique to CCDs, white-spots may appear on the screen with age. In order to reduce this phenomenon, this unit is equipped with a white-spot correction feature. Switch on the camera pow er supply and wait for at least 30 minutes. (Not av ailable on TK-C210FW)  TK-C215V4  TK-C215V12 1. Remove the dome cover . 2. Co ...

  • JVC TK-C215V4E - page 28

    28 Other s 䡵 Camera Signal system: U type : Based on NTSC standard E type : Based on P AL standard Scanning frequencies U type : 15.734 kH z (Horizontal), 59.94 Hz (V er tical) E type : 15.62 5 kHz (Horizontal), 50 Hz (V er tical) Image device: 1/4" IT CCD Effective picture elements: U type : 380,000 pixels, 768 (H) x 494 (V) E type : 440,0 ...

  • JVC TK-C215V4E - page 29

    29 䡵 General P ower supply : AC 24 V H 50 Hz/60 Hz DC 12 V d P ower consumption TK-C210FW: E type : 220 mA TK-C215V4: U type : 4.2 W E type : 340 mA TK-C215V12: U type : 6.6 W E type : 550 mA Ambient temperature : - 10 f to 50 f (14 g to 122 g ) (Operation) :0 f to 40 f (32 g to 104 g ) (Recommended) Mass TK-C210FW : Appro x. 450 g TK-C215V4 : Ap ...

  • JVC TK-C215V4E - page 30

    30 Others (continued) 䡵 External Dimensions [Unit: mm (inches)]  When cover is attached  When embedded * Specifications and appea rance of this unit and related products are subject to change for product improv ement without pr ior notice. 20 (13/16) 83.5 (3-5/16) 46 (1-13/16) 4- φ 4.5 (3/16) 6 (1/4) 4.5 (3/16) φ 89 (3-1/2) φ 22 (7/8) φ ...

  • JVC TK-C215V4E - page 31

    31 Focus chart TK-S215_EN.book Pag e 31 Tuesday, March 28, 2006 9:39 AM ...

  • JVC TK-C215V4E - page 32

    © 2006 Victor Company of Japan, Limited LST0308-001C TK-C210FW/TK-C215V4/ TK-C215V12 DOME CAMERA TK-S215_EN.book Pag e 32 Tuesday, March 28, 2006 9:39 AM ...

メーカー JVC カテゴリー Security camera

JVC TK-C215V4Eのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- TK-C215V4Eの取扱説明書
- JVCの製品カード
- パンフレット
- またはJVC TK-C215V4Eの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、JVC TK-C215V4Eの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、JVC TK-C215V4Eの取り付け説明書、サービスマニュアル、簡易説明書、またはJVC TK-C215V4Eのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、JVC TK-C215V4Eの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

JVC TK-C215V4Eデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJVC TK-C215V4Eを使用するのを助ける技術的文書のことです。説明書は通常、全てのJVC TK-C215V4Eユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

JVCの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. JVC TK-C215V4Eの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJVC TK-C215V4Eの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。JVC TK-C215V4Eに関してこのドキュメントで見つけることができる全てのヒントの目次
3. JVC TK-C215V4Eデバイスの基本機能を使うにあたってのヒント。 JVC TK-C215V4Eのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。JVC TK-C215V4Eに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJVC TK-C215V4Eのメーカー/サービスへの連絡先に関する情報。

JVC TK-C215V4Eについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもJVC TK-C215V4Eの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJVC TK-C215V4Eで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)