NEC DT 190の取扱説明書

21ページ 0.13 mb
ダウンロード

ページに移動 of 21

Summary
  • NEC DT 190 - page 1

    DT 150 Studiokopfhörer Professional Headphone Casque de Studio DT 190 Hör-Sprechgarnitur Headset Micro-casque Bedienungsanleitung Operating Instructions Notice d’utilisation ...

  • NEC DT 190 - page 2

    2 BEDIENUNGSANLEITUNG DT 150 - DT 190 OPERA TING INSTRUCTIONS DT 150 - DT 190 NOTICE D’UTILISA TION DT 150 - DT 190 INHAL T / CONTENTS / SOMMAIRE Charakteristik . . . . . . . . . . . . . . . . . . . . . . Seite 3 Anschluss . . . . . . . . . . . . . . . . . . . . . . . . . . Seite 3 Anwendung . . . . . . . . . . . . . . . . . . . . . . . . Seite 4 ...

  • NEC DT 190 - page 3

    3 BEDIENUNGSANLEITUNG DT 150 - DT 190 Sie haben sich für den dynamischen Studiokopfhörer DT 150 bzw . für die dynamische Hör-Sprechgarnitur DT 190 von beyerdynamic entschieden. Wir danken für Ihr V ertrauen. Äußerste Präzision bei der Fertigung und eine strenge Qualitätskontrolle garantieren die Zuverlässigkeit und den hohen Komfort, die ...

  • NEC DT 190 - page 4

    4 vom Fachmann angelötet werden. Bei allen anderen Kabeln mit freien Enden können die Stecker direkt an das Kabel gelö- tet werden (Anschlussbelegung siehe „Schaltbilder“, Seite 8-9). Anwendung Schließen Sie den Studiohörer DT 150 bzw. die Hör - Sprechgarnitur DT 190 an hochwertige Geräte mit der entspre- chenden Impedanz und Belastbarke ...

  • NEC DT 190 - page 5

    5 Wird der Kopfhörer im Stereobetrieb benutzt, sollten im Stecker die Anschlussdrähte für links und rechts getauscht werden, d.h. braun/orange (links) gegen rot/blau (rechts). Außerdem können die Deckel für L + R Kennzeichnung getauscht werden. Das Mikrofon sollten Sie im Abstand von 2 - 3 cm neben dem Mundwinkel plazieren. So werden Popp- ge ...

  • NEC DT 190 - page 6

    6 Ausführungen DT 150 Studio-Kopfhörer , 250 Ω , schwarz, mit Kabel K 100.07 (Stereoklinke 6,35 mm), Länge 3 m, steckbar . . . . . . . . . Best.-Nr . 455.970 DT 190 Hör-Sprechgarnitur , 200/250 Ω , schwarz, mit Kabel K 190.00 (freie Enden), Länge 1,5 m . . . . . . . . . . . . . . . Best.-Nr . 455.830 Ersatzteile für DT 150 - DT 190 BN 59- ...

  • NEC DT 190 - page 7

    7 K 190.40 - 1,5 M Anschlusskabel, 1,5 m, mit 3-pol. XLR-Stecker und 6,35 mm-Stereo-Klinke . . . . . . . Best.-Nr . 445.894 K 190.40 - 3,0 M Anschlusskabel, 3 m, mit 3-pol. XLR-Stecker und 6,35 mm-Stereo-Klinke . . . . . . . Best.-Nr . 446.750 K 190.41 - 1,5 M Anschlusskabel, 1,5 m, mit 5-pol. XLR-Stecker . . . . . . . Best.-Nr . 445.312 WK 190.00 ...

  • NEC DT 190 - page 8

    8 DT 190 Mikrofon Wandlerprinzip . . . . . . . . . . . dynamisch Übertragungsbereich . . . . . . . 40 - 12.000 Hz Richtcharakteristik . . . . . . . . . Hyperniere Störschallauslöschung . . . . . . 30 dB Ausgangsspannung bei Besprechung aus 5 cm Entfernung . . . . . . . . . . 3 mV Nennimpedanz . . . . . . . . . . . . ca. 200 Ω Gewicht . . . . . ...

  • NEC DT 190 - page 9

    9 OPERA TING INSTRUCTIONS DT 150 - DT 190 Thank you for selecting the DT 150 professional studio headphone or the DT 190 professional headset. They have been made in Germany from high-grade materials and assembled under stringent quality and performance tests to provide you with a professional communications tool. Please take some time to read thro ...

  • NEC DT 190 - page 10

    10 to fit crimped brass sleeves to the conductors and then solder the sleeve to the connector . If direct solder connections have to be made, use a high-temperature solder-pot to tin the tinsel conductors before making the solder joint to the connector , but be careful that the nylon thread does not melt. Direct solder connections can be made to al ...

  • NEC DT 190 - page 11

    11 The microphone should be positioned to the side of the mouth, about 20 - 30 mm forward. This will keep it within the direct sound path but out of the breath stream, therefore minimising any ‘pop’ sounds. Of course every user will be different and a degree of experimentation will be necessary to achieve the preferred result. Professional user ...

  • NEC DT 190 - page 12

    12 Models DT 150 Studio headphone, 250 Ω , black, with K 100.07 cable (stereo jack 6.35 mm), 3 m long, plug-in type . . . . . . . Order # 455.970 DT 190 Headset, 200/250 Ω , black, with bare-ended K 190.00 cable, 1.5 m long . . . . . . . . . . . . . . . . Order # 455.830 Spares for DT 150 - DT 190 BN 59-58/A Hearband pad. . . . . . . . . . . . ...

  • NEC DT 190 - page 13

    13 K 190.40 - 1,5 M Connecting cable, 1.5 m, with 3-pin. XLR plug and 1/4" jack plug . . . . . . . . . . . . . . Order # 445.894 K 190.40 - 3,0 M Connecting cable, 3 m, with 3-pin. XLR plug and 1/4" jack plug . . . . . . . . . . . . . . Order # 446.750 K 190.41 - 1,5 M Connecting cable, 1.5 m, with 5-pin. XLR plug . . . . . . . . . Order ...

  • NEC DT 190 - page 14

    14 DT 190 Microphone T ransducer type . . . . . . . . . . . dynamic Frequency response . . . . . . . . 40 - 12.000 Hz Polar pattern . . . . . . . . . . . . . hypercardioid Interference discharging . . . . 30 dB Output voltage at a distance of 5 cm . . . . . . . . . . . 3 mV Nominal output impedance . . approx. 200 Ω Weight . . . . . . . . . . . . ...

  • NEC DT 190 - page 15

    15 NOTICE D’UTILISA TION DT 150 - DT 190 Nous vous félicitons pour l’achat de ce casque / micro- casque professionnel. Pour exploiter au mieux ses possibilités, nous vous conseillons de lire attentivement cette note explicative. Description DT 150 Casque de studio professionnel de type fermé, assurant une parfaite isolation contre les bruits ...

  • NEC DT 190 - page 16

    16 Le microphone des micro-casques est d’origine monté côté gauche. En cas de nécessité vous pouvez modifier ce montage pour avoir le micro côté droit. DT 190 Lorsque vous utilisez votre micro-casque en stéréo il faut éga- lement invertir les fils gauche / droite dans le fiche du casque (brun / orange [gauche] contre rouge / bleu [droit ...

  • NEC DT 190 - page 17

    17 Les mousses de protection «POP» des micros se lavent simple- ment à l’eau tiède. Évitez de les replacer sur le microphone avant qu’elles ne soient totalement sèches. Les oreillettes, le bandeau de l’arceau serre-tête et les mousses «POP» étant soumis à une usure naturelle provoquée par la transpiration, la séborrhée et la sal ...

  • NEC DT 190 - page 18

    18 Accessoires fournis BN 56-79/A Mousse protection «POP» (pour DT 190) . . . . . . . . . . . . . . . . Art. N° 108.677 Accessoires en option pour DT 150 K 100.00 - 3,0 M Câble droit, 3 m, extrémités libres . . . . . . . . . . . . Art. N° 101.710 K 100.07 - 3,0 M Similaire au K 100.00 mais avec fiche Jack Stéréo 6,35 mm . . . . Art. N° 10 ...

  • NEC DT 190 - page 19

    19 WK 190.00 Câble torsadé, 3 m, extrémités libres . . . . . . . . . . . . Art. N° 448.176 Spécifications techniques DT 150 - DT 190 Écouteurs T ype de transducteur . . . . . . . dynamique Fonctionnement acoustique . fermé Bande passante . . . . . . . . . . . 5 à 30.000 Hz Impédance nominale . . . . . . . 250 Ω Pression sonore nominale ...

  • NEC DT 190 - page 20

    20 DT 190 Microphone T ype de transducteur . . . . . . . dynamique Bande passante . . . . . . . . . . . 40 - 12.000 Hz Directivité . . . . . . . . . . . . . . . . hypercardioïde Supression de bruit . . . . . . . . 30 dB V oltage de sortie à 5 cm . . . . 3 mV Impédance de sortie nominale . . . . . . . . . . . . . . . . env . 200 Ω Poids . . . ...

  • NEC DT 190 - page 21

    DEF 6/BA DT150_DT190 (01.06)/382.264/Hoh. · Änderungen und Irrtümer vorbehalten · Subject to change without notice · Sous réserve de modifications · Printed in Germany . beyerdynamic GmbH & Co. KG Theresienstr . 8 D-74072 Heilbronn T el. +49 (0) 71 31 / 617-0 Fax +49 (0) 71 31 / 617-224 info@beyerdynamic.de www .beyerdynamic.de beyerdyna ...

メーカー NEC カテゴリー Headphones

NEC DT 190のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- DT 190の取扱説明書
- NECの製品カード
- パンフレット
- またはNEC DT 190の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、NEC DT 190の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、NEC DT 190の取り付け説明書、サービスマニュアル、簡易説明書、またはNEC DT 190のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、NEC DT 190の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

NEC DT 190デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがNEC DT 190を使用するのを助ける技術的文書のことです。説明書は通常、全てのNEC DT 190ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

NECの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. NEC DT 190の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははNEC DT 190の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。NEC DT 190に関してこのドキュメントで見つけることができる全てのヒントの目次
3. NEC DT 190デバイスの基本機能を使うにあたってのヒント。 NEC DT 190のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。NEC DT 190に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるNEC DT 190のメーカー/サービスへの連絡先に関する情報。

NEC DT 190についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもNEC DT 190の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNEC DT 190で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)