-
Scag Power Equipment 7630001 - page 1
MODEL TS THIS MANUAL CONT AINS THE OPERA TING INSTRUCTIONS AND SAFETY INFORMA TION FOR YOUR SCAG ACCESSOR Y . READING THIS MANUAL WILL PROVIDE YOU WITH MAIN- TENANCE AND ADJUSTMENT PROCEDURES T O KEEP YOUR ACCESSOR Y PERFORMING T O MAXIMUM EFFICIENCY . THE SPECIFIC MODELS THA T THIS BOOK COVERS ARE CON- T AINED ON THE INSIDE COVER. BEFORE OPERA TIN ...
-
Scag Power Equipment 7630001 - page 2
F AILURE TO FOLLOW SAFE OPERA TING PRACTICES MA Y RESUL T IN SERIOUS INJURY . * Keep all safety shields in place. * Before performing any maintenance or service, stop the machine and remove the spark plug wire. * If a mechanism becomes clogged, stop the engine and wait for all moving parts to come to a complete halt before cleaning. * Keep hands, f ...
-
Scag Power Equipment 7630001 - page 3
1 1.1 INTRODUCTION This manual has been prepared to provide the information you need to correctly assemble, operate, and maintain this Tiger Striper. Read it carefully and keep it for future reference. The replacement of any part on this product by other than the manufacturer's authorized replacement part may adversely affect the performance, ...
-
Scag Power Equipment 7630001 - page 4
2 FIGURE 2-1 3. Repeat this procedure on the opposite side. The machine is now ready to operate. 2.3 REMOVING THE TIGER STRIPPER The Tiger Striper can be easily removed whenever the machine is being transported or when stripping is not needed. To remove the Tiger Striper, follow the instructions below. 1. Prepare the machine so there is easy and sa ...
-
Scag Power Equipment 7630001 - page 5
3 3. Attach the mounting brackets to the cross bar between the wheel motor brackets using (4) u- bolts and (8) serrated flange nuts. See Figure 3-1. Do not tighten the hardware. -Note- If the Tiger Striper is installed on an STT with a serial number below 7219999, part number 423966 mounting spacer will need to be installed between the mounting bra ...
-
Scag Power Equipment 7630001 - page 6
4 3. Attach the mounting brackets to the cross bar between the wheel motor brackets using (4) u- bolts and (8) serrated flange nuts. See Figure 3-3. Do not tighten the hardware. -Note- The Tiger Striper can not be installed on an STC with a serial number below 7630001. FIGURE 3-3 4. The edge of the mounting bracket should be under the wheel motor m ...
-
Scag Power Equipment 7630001 - page 7
5 FIGURE 4-1 FIGURE 4-2 FIGURE 4-3 LAWN STRIPING GUIDELINES A stripe pattern can add richness and depth to any lawn. Here are some guidelines to help produce various patterns and to enhance your striping techniques. Basic stripe pattern: Begin by mowing the perimeter around the property (Reference Figure 4-1). Next, mow in opposing directions throu ...
-
Scag Power Equipment 7630001 - page 8
6 TIGER STRIPER ASSEMBL Y - STT ST T with a serial number of 7219999 or Below STT-TS Ex p loded View 1 (4x) 1 (4x) 2 3 (4x) 3 (4x) 4 (4x) 4 (4x) 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 14 15 16 16 17 18 19 20 21 23 23 24 25 26 27 28 29 5 17 15 30 30 22 22 6 6 31 32 ...
-
Scag Power Equipment 7630001 - page 9
7 R e f . Part No . Number Description 1 04021-09 Nut, Elastic Stop 3/8-16 2 423953 Striper Stop, L.H. 3 04001-19 Bolt, Hex Head 3/8-16 x 1" 4 04100-01 U -Bolt, 5/16-18 x 1" 5 451660 Mounting Bracket Weldment, LH. 6 04041-11 Flatwasher , 3/8-.406 x 1-1/2" 7 Gauge 7 04001-22 Bolt, Hex Head 3/8-16 x 2-3/4" 8 04019-04 Nut, Serrated ...
-
Scag Power Equipment 7630001 - page 10
8 TIGER STRIPER ASSEMBL Y - STC STC-TS Ex p loded View 1 2 3 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 14 16 16 18 19 20 21 22 22 23 23 24 26 25 4 (4x) 5 15 17 15 1 6 6 27 28 ...
-
Scag Power Equipment 7630001 - page 11
9 TIGER STRIPER ASSEMBL Y - STC R e f . Part No . Number Description 1 423966 Spacer , Striper Mounting 2 43653 Roller Shaft 3 48100-24 Bushing, .752 Oilite 4 04100-01 U -Bolt, 5/16-18 x 1" 5 451660 Mounting Bracket Weldment, LH. **L.H. Mounting Bracket is used on the Right Side on STC 6 04041-11 Flatwasher , 3/8-.406 x 1-1/2" 7 Gauge 7 0 ...
-
Scag Power Equipment 7630001 - page 12
10 NOTES ...
-
Scag Power Equipment 7630001 - page 13
LIMITED W ARRANTY- COMMERCIAL A CCESSOR Y Any part of the Scag commercial accessory manufactured by Scag and found, in the reasonable judgment of Scag, to be defective in material or workmanship, will be repaired or replaced by an Authorized Scag Service Dealer without charge for parts and labor. The Scag accessory, including any defective part, mu ...
-
Scag Power Equipment 7630001 - page 14
P ART NO. 03142 PRINTED 8-2003 PRINTED IN USA © 2003 SCAG POWER EQUIPMENT DIVISION OF MET ALCRAFT OF MA YVILLE, INC WWW .SCAG .COM ...
Scag Power Equipment 7630001についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもScag Power Equipment 7630001の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがScag Power Equipment 7630001で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。