Mitsubishi WL6700LUの取扱説明書

49ページ 5.03 mb
ダウンロード

ページに移動 of 49

Summary
  • Mitsubishi WL6700LU - page 1

    WL6700 LCD PROJECTOR MODEL WL6700U WL6700LU User Manual This User Manual is important to you. Please read it befor e using your projector . ...

  • Mitsubishi WL6700LU - page 2

    EN-2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE P ARTS INSIDE REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. The lightning fl ash with arr owhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “d ...

  • Mitsubishi WL6700LU - page 3

    EN-3 Contents Important safeguards ........................................................................................................................ 4 Preparing your pr ojector .................................................................................................................... 6 Using the remote contr ol ..................... ...

  • Mitsubishi WL6700LU - page 4

    EN-4 Important safeguar ds Please read all these instructions r egarding your projector and r etain them for future refer ence. Follow all warnings and instructions marked on the projector . 1. Read instructions All the safety and operating instructions should be read befor e the appliance is operated. 2. Retain instructions The safety and operatin ...

  • Mitsubishi WL6700LU - page 5

    EN-5 WARNING: Unplug immediately if there is something wrong with your pr ojector . Do not operate if smoke, strange noise or odor comes out of your projector . It might cause fi r e or electric shock. In this case, unplug immediately and contact your dealer . Never remove the cabinet. This projector contains high voltage cir cuitry . An inadverte ...

  • Mitsubishi WL6700LU - page 6

    EN-6 Pr eparing your projector 1 2 3 Checking accessories The following accessories are pr ovided with this projector . Check to be sure that all of the accessories are packed in the package. Important: • The attached power cords ar e to be used exclusively for this product. Never use them for other products. Inserting the batteries into the remo ...

  • Mitsubishi WL6700LU - page 7

    EN-7 Overview 1 2 8 4 5 9 10 6 7 3 8 7 10 9 11 1 3 4 6 5 2 1 Remote control sensor (Fr ont) 2 Lens 3 Control ar ea 4 Easy-carry handle 5 Air inlet grille 6 T erminal board 7 Air outlet grille Control ar ea 1 POWER button 2 AUTO POSITION/ S button 3 COMPUTER/ W button 4 VOLUME/ T button 5 MENU button 6 ZOOM/FOCUS button 7 ST A TUS indicator 8 POWER ...

  • Mitsubishi WL6700LU - page 8

    EN-8 1 2 3 Preparating your projector (continued) Bottom side 1 Adjustment feet 2 Air inlet grille/Filter cover 3 Lamp cover Caution: Do not replace the lamp immediately after using the projector because the lamp would be extr emely hot and it may cause burns. 30 COMPUTER VIDEO S-VIDEO DVI-D(HDCP) HOME Page Up END Page Down AUTO POSITION KEYSTONE A ...

  • Mitsubishi WL6700LU - page 9

    EN-9 Using the r emote control 30° 30° 30° 30° 20° 10° 20° 10° 20° 20° Operational range of the remote contr ol • Keep the remote contr ol photo-sensor out of direct sunlight or fl uor escent lamp light. • Keep the remote control photo-sensor at least 2 m (6 feet) away from fl uorescent lamps. Otherwise, the remote contr ol may malf ...

  • Mitsubishi WL6700LU - page 10

    EN-10 Setting up your pr ojector Setting up the screen Install the screen perpendicularly to the pr ojector . If the screen can not be installed in such a way , adjust the projection angle of the pr ojector . (See page 11.) • Install the screen and pr ojector so that the projector’ s lens is placed at the same height and horizontal position of ...

  • Mitsubishi WL6700LU - page 11

    EN-11 Setting up your projector (continued) LENS SHIFT button T o adjust the positions of the projector and the scr een, use LENS SHIFT button. 1. Press the LENS SHIFT button. • The LENS SHIFT menu appears at the center of the screen. 2. Press the S , T , W or X button to move the image position. • When the T button is pressed, the image moves ...

  • Mitsubishi WL6700LU - page 12

    EN-12 Setting up your projector (continued) Front pr ojection, ceiling mounting For ceiling mounting, you need the ceiling mount kit designed for this projector . Ask a specialist for installa- tion. For details, consult your dealer . • The warranty on this pr ojector does not cover any damage caused by use of any non-recommended ceiling mount ki ...

  • Mitsubishi WL6700LU - page 13

    EN-13 Viewing computer images 2 1 AUDIO OUT AUDIO IN 1/2 2 1 2 1 A. Connecting the projector to a computer Preparation: • Make sure that the power of the pr ojector and that of the computer are turned off. • When connecting the projector to a desktop computer , disconnect the RGB cable that is connected to the monitor . For analog connection: ( ...

  • Mitsubishi WL6700LU - page 14

    EN-14 Viewing computer images (continued) 2 1 1. Plug the attached power cord into the power cord inlet of this projector . 2. Plug the other end of the power cord into a power outlet. • The power cords for use in the U.S. and Eur ope are included with this projector . Use the appropriate one for your country . • This projector uses the power p ...

  • Mitsubishi WL6700LU - page 15

    EN-15 Viewing computer images (continued) C. Projecting images Preparation: • Remove the lens cap. 1. Put the projector into standby mode by pressing the main power switch. The POWER indicator lights up r ed. • If the projector was turned off before the lamp was cooled down suf fi ciently last time, the fan may start rotating and the POWER but ...

  • Mitsubishi WL6700LU - page 16

    EN-16 Viewing computer images (continued) Important: • Focus, zoom and lens shift adjustment is possible in the normal picture mode only . T o stop projecting: 13. Press the POWER button. • A confi rmation message is displayed. • T o cancel the procedur e, leave the projector for a while or press any button except the POWER button. 14. Press ...

  • Mitsubishi WL6700LU - page 17

    EN-17 Setting the aspect ratio Y ou can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the scr een to be used or your preference. How to change the settings: With the remote contr ol: 1. Press the ASPECT button. • Every time the ASPECT button is pressed ...

  • Mitsubishi WL6700LU - page 18

    EN-18 Viewing video images Connecting to a video player , etc. 1. Connect one end (yellow) of the supplied audio/video cable to the VIDEO IN terminal of the projector . 2. Connect one end (white and red) of the supplied audio/ video cable to the audio input terminals (L/MONO, R) of the projector . 3. Connect the other end (yellow) of the audio/vide ...

  • Mitsubishi WL6700LU - page 19

    EN-19 Connecting to video equipment having a HDMI terminal or DVI-D terminal Y ou can project high-quality images by connecting the COMPUTER/COMPONENT VIDEO DVI-D (HDCP) terminal of this projector to video equipment having a HDMI output terminal or DVI-D terminal. In addition, this pr ojector supports HDCP and is able to receive encrypted digital v ...

  • Mitsubishi WL6700LU - page 20

    EN-20 Equipment having a DVI-D terminal T o audio output terminals Audio cable (option) T o audio input terminals T o DVI-D terminal DVI cable (option) COMPUTER/COMPONENT VIDEO DVI-D (HDCP) Connection (for video equipment having a DVI-D terminal) • For connection to the DVI-D terminal, use a commercially available DVI cable. • Some cables may n ...

  • Mitsubishi WL6700LU - page 21

    EN-21 Viewing video images (continued) C. Projecting images Preparation: • Remove the lens cap. 1. Put the projector into standby mode by pressing the main power switch. The POWER indicator lights up red. • If the projector was turned off before the lamp was cooled down suffi ciently last time, the fan may start rotating and the POWER button m ...

  • Mitsubishi WL6700LU - page 22

    EN-22 9. Press the ZOOM/FOCUS button to display “FOCUS” and then press the button again to display “ZOOM.” 10. Adjust with the W or X button to get an approximate size. • When the ENTER button is pressed while “ZOOM” is displayed, the adjustment mode is switched between FAST and STEP. When FAST is selected, the speed of zoom controlle ...

  • Mitsubishi WL6700LU - page 23

    EN-23 Menu operation • Menus are not displayed when no signal is supplied to the pr ojector . * 1: Not available when COLOR ENHANCER is set to sRGB. * 2: Not available with certain signals. * 3: Not available when the input signal is from the VIDEO IN or S-VIDEO IN terminal. * 4: Available only when the input signal is TV60, TV50, 480i, 576i or 1 ...

  • Mitsubishi WL6700LU - page 24

    EN-24 Available settings in the menus Set the following items on their relevant menus. 1. IMAGE menu IMAGE - ADV ANCED menu ITEM SETTING FUNCTION COLOR ENHANCER AUTO Select to optimize the settings automatically depending on the input signal. (Select this option for normal use.) PRESENT A TION Select to make the displayed image look bright and cris ...

  • Mitsubishi WL6700LU - page 25

    EN-25 2. INSTALLATION menu Menu operation (continued) ITEM SETTING FUNCTION LAMP MODE STANDARD Select this option when you want to view images in a well-lit room. LOW Select to moderate the intensity of the lamp. The operating sound is reduced and the lamp lifetime becomes longer. • When the lamp mode is switched, the projected image may fl icke ...

  • Mitsubishi WL6700LU - page 26

    EN-26 3. FEA TURE menu FEA TURE AUTO (FULL) AUTO opt. MENU POSITION VIDEO SIGNAL ? ASPECT RESET ALL English LANGUAGE A Ë OK SCART INPUT DISPLA Y INPUT P ASSWORD FUNCTION CINEMA MODE AUTO 1. SETUP AUTO OFF ITEM SETTING FUNCTION ASPECT AUTO (FULL) Input video signal is displayed at the max height (800 pixels) or max width (1366 pixels) of the panel ...

  • Mitsubishi WL6700LU - page 27

    EN-27 4. SIGNAL menu SIGNAL - RESOLUTION (MEMORIZE) menu SIGNAL - USER menu ITEM SETTING FUNCTION MEMOR Y CALL AUTO / MEMOR Y 1 / Use to select the setting of RESOLUTION (MEMORIZE) alr eady saved. Impossible to select if no setting has been saved. AUTO is selected by default. It optimizes the signal format automatically depending on the type of vid ...

  • Mitsubishi WL6700LU - page 28

    EN-28 5. INFORMA TION menu ITEM DESCRIPTION LAMP TIME (LOW) This item shows a lamp operating time (hour) calculated based on that LAMP MODE is LOW . • When the LAMP MODE is ST ANDARD, this item shows a longer lamp operating time than the actual time. (See page 40 for the interval of lamp replacement.) • When the lamp operating time is 0 to 10 h ...

  • Mitsubishi WL6700LU - page 29

    EN-29 Adjusting pr ojected images T o adjust the brightness (CONTRAST and BRIGHTNESS): Y ou can make adjustments for the brightness of the projected image using the menu. (See page 24 for menu setting.) 1. Display the IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pressing the S or T button. 3. Adjust the selected item by pressing the W or X butto ...

  • Mitsubishi WL6700LU - page 30

    EN-30 T o adjust the tone of white (COLOR TEMP .): Y ou can select a preset color temperatur e (white tone) using the menu. (See page 24 for menu setting.) 1. Display the IMAGE menu. 2. Select COLOR TEMP . by pressing the S or T button. 3. Select your desired color temperature by pr essing the W or X button. T o cancel the menu: 4. Press the MENU b ...

  • Mitsubishi WL6700LU - page 31

    EN-31 Adjusting projected images (continued) How to adjust the computer image This projector automatically selects a pr oper signal format according to the type of video signal supplied from the computer . However , video signals from the computer may not be pr ojected correctly depending on the types of the computer and images to be projected. In ...

  • Mitsubishi WL6700LU - page 32

    EN-32 How to adjust the image supplied from the computer using the menu: Carry out the following procedur es according to the symptoms. Wide strips appear . ……………………………………… Adjust TRACKING in the SIGNAL menu. The projected image fl ickers. The projected image is blurr ed. ...................................... Adjust ...

  • Mitsubishi WL6700LU - page 33

    EN-33 Set the background color (Set the background color only when you set the im- age size to x1 or x2.) 6. Select BACK COLOR by pressing the S or T but- ton. 7. Select your desired color for the backgr ound (GRA Y , RED, GREEN, BLUE, BLACK, WHITE, RED50%, GREEN50%, or BLUE50%) by pressing the W or X button. Set the image size 8. Select SIZE by pr ...

  • Mitsubishi WL6700LU - page 34

    EN-34 MENU ACCESS FEA TURE opt. LOCK UNLOCK OK OK P ASSWORD CONFIRM 1 3 2 4 O K : ENTER CANCEL : MENU MENU ACCESS FEA TURE opt. LOCK UNLOCK OK OK P ASSWORD 1 3 2 4 O K : ENTER CANCEL : MENU Password function This projector is equipped with the passwor d function that is designed for prevention of wr ong operation by children and r estriction on ope ...

  • Mitsubishi WL6700LU - page 35

    EN-35 Split Y ou can split the screen in two and display a computer image on the left screen and a video image on the right screen. Left screen Right screen T o use the split mode: 1. Press the SPLIT button on the remote contr ol. • The screen is split in two and the left and right screens display the following images: - Left screen: Image suppli ...

  • Mitsubishi WL6700LU - page 36

    EN-36 Mouse remote contr ol By connecting to personal computer through the USB port, you can operate your computer with the pr ojector remote control. Projector + computer with USB connector Operation • Y ou can use the mouse remote contr ol function with a computer supporting USB only . • When the lamp is turned ON, the computer connected with ...

  • Mitsubishi WL6700LU - page 37

    EN-37 Supervising and controlling by computer Y ou can supervise and control the pr ojector’ s operation using a personal computer via a LAN network. • T o supervise and contr ol the projector , install the software “Projector -Control Device Installer *” contained in the attached CD-ROM. For the installation procedur e and usage of the sof ...

  • Mitsubishi WL6700LU - page 38

    EN-38 Indicators POWER Steady green or Steady red Steady red Steady green Steady red Steady red Blinking green/red Blinking green/red ST A TUS Blinking orange Blinking green Blinking green/red Blinking red Steady red Off Steady or Blinking CONDITION Abnormal temperature • The ventilation grilles are clogged with dust or dirt. • The room tempera ...

  • Mitsubishi WL6700LU - page 39

    EN-39 This projector includes a terminal cover with Anti-Theft Alarm device. Once the terminal cover is installed, its Anti-Theft Alarm device will detect vibration caused by the projector being moved and emit an alarm. • Mitsubishi assumes no responsibility or liability for theft or other damages. Procedur e for setting the anti-theft alarm devi ...

  • Mitsubishi WL6700LU - page 40

    EN-40 Replacing the lamp This projector is equipped with a lamp to pr oject images. This lamp is a consumable. It may bur n out or its brightness may decrease during use. In such cases, r eplace the lamp with a new one as soon as possible. Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector . Contact your ...

  • Mitsubishi WL6700LU - page 41

    EN-41 (a) (b) (c) (c) Replacing the lamp (continued) T o replace the lamp: 1. T ur n off the main power switch and unplug the power cor d. 2. Reverse the projector gently . 3. Loosen the screw (a) using a Phillips screwdriver (+), and remove the lamp cover (b). 4. Loosen the screws (c) using a Phillips screwdriver (+). 5. Pull up the handle. 6. Pul ...

  • Mitsubishi WL6700LU - page 42

    EN-42 Maintenance W ar ning: • Never use fl ammable air duster or other materials when cleaning the air -fi lter . Flammable substances may ignite causing fi r e or backdown when the lamp is illuminated. • Do not use fl ammable solvents (benzene, thinner , etc.) and fl ammable aer osols when cleaning the projector body and lens. Flammable ...

  • Mitsubishi WL6700LU - page 43

    EN-43 T roubleshooting Before asking for r epair of the projector , check the following. If the symptom persists, stop using the projector , be sure to unplug the power plug, and then contact your dealer . No image appears on the screen. Problem Solution Power can not be turned on. • Check whether the indicators are on or of f and how they are li ...

  • Mitsubishi WL6700LU - page 44

    EN-44 T roubleshooting (continued) No image appears on the screen. (continued) Problem Solution “NO SIGNAL” is displayed. • T ur n on the power of the connected device, or check whether there is something wrong with the connected device. • Check whether the external device output signals. (Check this especially when the external device is a ...

  • Mitsubishi WL6700LU - page 45

    EN-45 T roubleshooting (continued) Images are not displayed corr ectly . (continued) Problem Solution Projected images ar e obscured. • Match the output resolution of your computer with the resolution of the pr ojector . For the method to change the output resolution of the computer , contact the manufacturer of your computer . (See page 47.) • ...

  • Mitsubishi WL6700LU - page 46

    EN-46 Specifi cations The specifi cations and outside appearance of the pr ojector are subject to change without prior notice. T ype LCD projector Model WL6700U/WL6700LU Display technology 1.2-inch LCD panel: 3 pieces (for R,G,B) Pixel: 1366 x 800 = 1092800 pixels T otal 3278400 pixels Active pixel rate: 99.99% or more (each panel) Projection len ...

  • Mitsubishi WL6700LU - page 47

    EN-47 Specifi cations (continued) Specifi cation of RGB signals in each computer mode of the projector Signal mode Resolution (H x V) Horizontal frequency (kHz) V ertical frequency (Hz) Normal mode (H x V) Real mode (H x V) TV60, 480i (525i) 720 x 480 15.73 59.94 1066 x 800 640 x 480 *1 TV50, 576i (625i) 720 x 576 15.63 50.00 1066 x 800 768 x 576 ...

  • Mitsubishi WL6700LU - page 48

    EN-48 1 R(RED)/P R /C R 2 G(GREEN)/Y 3 B(BLUE)/P B /C B 4 GND 5 GND 6 GND 7 GND 8 GND 9 DDC 5V 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock 1 - - 2 TXD IN 3 RXD OUT 4 - - 5 GND - 6 - - 7 - - 8 - - 9 - - 1 5 11 6 10 15 SERIAL (D-SUB 9-pin) Pin No. Name I/O COMPUTER/COMPONENT VIDEO IN 2 (Mini D-SUB 15-pin) Pin No. Spec. COMPUTER/COMPONENT VI ...

  • Mitsubishi WL6700LU - page 49

    MITSUBISHI Projector Contact Information 1 Zusho Baba, Nagaokakyo-City , Kyoto Japan M I T SUBIS HI ELECTRIC CORPORA T I O N North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www .mitsubishielectric.ca Information T echnologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, Canada Sales & T echnical Inquires Phone :+1-(800) ...

メーカー Mitsubishi カテゴリー Projector

Mitsubishi WL6700LUのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- WL6700LUの取扱説明書
- Mitsubishiの製品カード
- パンフレット
- またはMitsubishi WL6700LUの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Mitsubishi WL6700LUの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Mitsubishi WL6700LUの取り付け説明書、サービスマニュアル、簡易説明書、またはMitsubishi WL6700LUのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Mitsubishi WL6700LUの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Mitsubishi WL6700LUデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMitsubishi WL6700LUを使用するのを助ける技術的文書のことです。説明書は通常、全てのMitsubishi WL6700LUユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Mitsubishiの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Mitsubishi WL6700LUの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMitsubishi WL6700LUの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Mitsubishi WL6700LUに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Mitsubishi WL6700LUデバイスの基本機能を使うにあたってのヒント。 Mitsubishi WL6700LUのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Mitsubishi WL6700LUに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMitsubishi WL6700LUのメーカー/サービスへの連絡先に関する情報。

Mitsubishi WL6700LUについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもMitsubishi WL6700LUの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMitsubishi WL6700LUで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)