JVC KD-DB711の取扱説明書

38ページ 1.86 mb
ダウンロード

ページに移動 of 38

Summary
  • JVC KD-DB711 - page 1

    ENGLISH FRANÇAIS NEDERLANDS CD RECEIVER RECEPTEUR CD CD-RECEIVER KD-DB711 For installation and connections, refer to the separate manual. Pour l’installation et les raccordements, se référer au manuel séparé. Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende handleiding. INSTRUCTIONS MANUEL D’I ...

  • JVC KD-DB711 - page 2

    2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUT I ON : Do not open the top cover. There are no user serviceable parts inside the uni ...

  • JVC KD-DB711 - page 3

    3 ENGLISH How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 Control panel — KD-DB711 ....... 5 Parts identification ................................. 5 Getting started ....................... 6 Basi ...

  • JVC KD-DB711 - page 4

    4 ENGLISH How to use the MODE button If you press MODE, the receiver goes into functions mode, then the number buttons and ¢ / 4 buttons work as different function buttons. Ex.: When number button 2 works as MO (monaural) button. Time countdown indicator To use these buttons for original functions again after pressing MODE, wait for 5 seconds with ...

  • JVC KD-DB711 - page 5

    5 ENGLISH Control panel — KD-DB711 Parts identification 1 +/– buttons 2 DISP (display) button 3 Loading slot 4 Display window 5 MODE button 6 0 (eject) button 7 ¢ / 4 buttons 8 (standby/on/attenuator) button 9 SEL (select) button p Remote sensor • See page 26. q EQ (equalizer) button w MO (monaural) button e SSM (Strong-station Sequential Me ...

  • JVC KD-DB711 - page 6

    6 ENGLISH ⁄ Adjust the volume level. Volume level appears. Volume level indicator @ Adjust the sound as you want. (See pages 20 and 21.) To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Getting started Basic operations ~ Turn on the power. Ÿ Select a source. You cannot select some sources if they a ...

  • JVC KD-DB711 - page 7

    7 ENGLISH Canceling the display demonstration If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 23. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour, minute, and clock system. 1 Select “CLOCK H” (hour), then adjust ...

  • JVC KD-DB711 - page 8

    8 ENGLISH ~ Ÿ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. Radio operations Listening to the radio To tune in to a station manually In step ! on the left... 1 2 Sel ...

  • JVC KD-DB711 - page 9

    9 ENGLISH Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 2 Select the FM band (FM1 – FM3) you want to store into. 3 4 “SSM” flashes, then disappears when automatic presetting is over. Local FM stations with the strongest signals are searched an ...

  • JVC KD-DB711 - page 10

    10 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into the preset number 4 of the FM1 band. 1 2 3 4 Preset number flashes for a while. Listening to a preset station 1 2 3 Select the preset station (1 – 6) you want. • If the preset station is an FM RDS station, you can use Programme Search (see page 23). To check the current clock ...

  • JVC KD-DB711 - page 11

    11 ENGLISH ! Start searching for your favorite programme. If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in. PTY codes NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATH ...

  • JVC KD-DB711 - page 12

    12 ENGLISH What you can do with RDS Radio Data System (RDS) allows FM stations to send an additional signal along with their regular programme signals. By receiving the RDS data, this receiver can do the following: • Programme Type (PTY) Search (see page 11) • Standby Reception of Traffic Announcement—TA (see the following) or PTY (see pages ...

  • JVC KD-DB711 - page 13

    13 ENGLISH Tracking the same programme— Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this receiver automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below). When shipped from the factory, Netw ...

  • JVC KD-DB711 - page 14

    14 ENGLISH To tune in to an ensemble manually In step ! on the left... 1 2 Select the desired ensemble frequencies. What is DAB system? DAB can deliver CD quality sound without any annoying interference and signal distortion. Furthermore, it can carry text, pictures, and data. When transmitting, DAB combines several programmes (called “services? ...

  • JVC KD-DB711 - page 15

    15 ENGLISH Storing DAB services in memory You can preset six DAB services (primary) for each band. 1 Perform steps ~ to ⁄ on page 14, to select a service you want. 2 Select the preset number (1 – 6) you want to store into. Preset number flashes for a while. Tuning in to a preset DAB service 1 2 3 Select the preset DAB service (primary) number ( ...

  • JVC KD-DB711 - page 16

    16 ENGLISH Disc operations Playing a disc About MP3 and WMA discs MP3 and WMA (Windows Media ® Audio) “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” • When inserting an MP3 or a WMA disc: * Either the MP3 or WMA indicator lights up depending on the detected file. • When inserting an audi ...

  • JVC KD-DB711 - page 17

    17 ENGLISH To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks To the following tracks. To the beginning of the current track, then the previous tracks. To go to the next or previous folders (only for MP3 or WMA discs) 1 2 To next folders. To previous folders. To locate a particular track (for CD) or f ...

  • JVC KD-DB711 - page 18

    18 ENGLISH Changing the display information While playing an audio CD or a CD Text * 1 If the current disc is an audio CD, “NO NAME” appears. While playing an MP3 or WMA disc • When “TAG DISP” is set to “TAG ON” (see page 24) * 2 If an MP3/WMA file does not have ID3 tags, folder name and file name appear. In this case, the TAG indicat ...

  • JVC KD-DB711 - page 19

    19 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected while playing an MP3 disc Mode Plays repeatedly TRK RP T : The current track. • RPT lights up. FLDR RP T *: All tracks of the current folder. • and RPT lig ...

  • JVC KD-DB711 - page 20

    20 ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ Ÿ Ex.: When “ROCK” is selected Indication pattern for each sound mode: Indication For: Preset values BAS * 1 TRE * 2 LOUD * 3 USER (Flat sound) 00 00 OFF ROCK Rock or disco music +03 +01 ON CLASSI ...

  • JVC KD-DB711 - page 21

    21 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range BAS* 1 (bass) Adjust the bass. –06 (min.) to +06 (max.) TRE* 1 (treble) Adjust the treble. –06 (min.) to +06 (max.) FAD* 2 (fader) Adjust the ...

  • JVC KD-DB711 - page 22

    22 ENGLISH General settings — PSM Basic procedure You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 2 Select a PSM item. Ex.: When you select “DIMMER” 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. You can note your PSM setting in t ...

  • JVC KD-DB711 - page 23

    23 ENGLISH Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7]. DEMO OFF : Cancels. CLOC K H Hour adjustment 0 – 23 (1 – 12), [7] [Initial: 0 (0:00)] CLOC K M Minute adjustment 00 – 59, [7] [Ini ...

  • JVC KD-DB711 - page 24

    24 ENGLISH Indications Selectable settings, [reference page] DAB A F Alternative frequency reception AF ON : [Initial]; Traces the programme among DAB services and FM RDS stations, [15]. AF OFF: Cancels. DAB VO L DAB volume adjustment You can adjust the volume level (VOL –12 — VOL +12) of DAB tuner to match the FM sound level and store it in me ...

  • JVC KD-DB711 - page 25

    25 ENGLISH When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control panel Detaching the control panel EN20-26_KD-DB711[EX]f.indd 25 EN20-26_KD-DB ...

  • JVC KD-DB711 - page 26

    26 ENGLISH Main elements and features 1 (standby/on attenuator) button • Turns on and off the power and also attenuates the sound. 2 SRC (source) button • Selects the source. 3 R (reverse) / F (forward) buttons • Searches for stations or DAB services if pressed briefly. • Searches for ensembles if pressed and held. • Fast-forwards or reve ...

  • JVC KD-DB711 - page 27

    27 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connector Moisture condensation Moisture may condense on the lens inside the CD player ...

  • JVC KD-DB711 - page 28

    28 ENGLISH More about this receiver Basic operations Turning on the power • By pressing SOURCE on the receiver, you can also turn on the power. Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Selecting the sources ...

  • JVC KD-DB711 - page 29

    29 ENGLISH Playing a CD-R or CD-RW • Use only “finalized” CD-Rs or CD-RWs. • This receiver can play back only the files of the same type which is first detected if a disc includes both audio CD (CD-DA) files and MP3/WMA files. • This receiver can play back multi-session discs; however, unclosed sessions will be skipped while playing. • ...

  • JVC KD-DB711 - page 30

    30 ENGLISH • This receiver cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded in an unappropriated format. – MP3 files encoded with Layer 1/2. – WMA files encoded with lossless, professional, and voice format. – WMA files which are not based upon Windows Media ® Audio. – WMA fi ...

  • JVC KD-DB711 - page 31

    31 ENGLISH Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. Reset ...

  • JVC KD-DB711 - page 32

    32 ENGLISH Symptoms Causes Remedies MP3/WMA playback • Disc cannot be played back. No MP3/WMA tracks are recorded on the disc. Change the disc. MP3/WMA tracks do not have the extension code <.mp3> or <.wma> in their file names. Add the extension code <.mp3> or <.wma> to their file names. MP3/WMA tracks are not recorded in ...

  • JVC KD-DB711 - page 33

    33 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic disto ...

  • JVC KD-DB711 - page 34

    © 2005 Victor Company of Japan, Limited EN, FR, NL 0105MNMMDWJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil Hebt u PROBLEMEN met de bediening? Stel ...

  • JVC KD-DB711 - page 35

    1 4 3 2 1 *1 KD-DB711 Installation/Connection Manual Manuel d’installation/raccordement Handleiding voor installatie/aansluiting ENGLISH This unit is designed to operate on 12 V DC, NEGA TIVE gr ound electrical systems . If your vehicle does not ha ve this system, a v oltage in ver ter is required, which can be purchased at JVC IN- CAR ENTERT AIN ...

  • JVC KD-DB711 - page 36

    2 3 2 1 Removing the receiver • Bef ore removing the receiv er , release the rear section. Ve r wijderen van de receiver •V oordat u het apparaat v erwijder t, moet u het achtergedeelte losmaken. Retrait de l’appareil • A vant de r etirer l’appar eil, libérez la section arrière. Inser t the two handles, then pull them as illustr ated so ...

  • JVC KD-DB711 - page 37

    3 ENGLISH ELECTRICAL CONNECTIONS To prev ent shor t circuits, we recommend that y ou disconnect the batter y’ s negative terminal and make all electrical connections bef ore installing the receiver . • Be sure to gr ound this unit to the car’ s chassis again after installation. Notes: • Replace the fuse with one of the specified rating. If ...

  • JVC KD-DB711 - page 38

    4 PRECAUTIONS on power supply and speaker connections: • DO NO T connect the speaker leads of the power cor d to the car battery; otherwise, the unit will be seriousl y damaged. • BEFORE connecting the speaker leads of the po wer cord to the speakers , check the speak er wiring in your car . VOORZORGSMAA TREGELEN bij het verbinden van de stroom ...

メーカー JVC カテゴリー CD Player

JVC KD-DB711のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- KD-DB711の取扱説明書
- JVCの製品カード
- パンフレット
- またはJVC KD-DB711の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、JVC KD-DB711の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、JVC KD-DB711の取り付け説明書、サービスマニュアル、簡易説明書、またはJVC KD-DB711のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、JVC KD-DB711の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

JVC KD-DB711デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJVC KD-DB711を使用するのを助ける技術的文書のことです。説明書は通常、全てのJVC KD-DB711ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

JVCの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. JVC KD-DB711の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJVC KD-DB711の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。JVC KD-DB711に関してこのドキュメントで見つけることができる全てのヒントの目次
3. JVC KD-DB711デバイスの基本機能を使うにあたってのヒント。 JVC KD-DB711のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。JVC KD-DB711に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJVC KD-DB711のメーカー/サービスへの連絡先に関する情報。

JVC KD-DB711についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもJVC KD-DB711の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJVC KD-DB711で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)