Emerson 5150の取扱説明書

32ページ 3.18 mb
ダウンロード

ページに移動 of 32

Summary
  • Emerson 5150 - page 1

    Installation Manual 381333-367 B 50 Hanover Rd, Florham Park, NJ 07932-1591 USA call 1 800 800-2726 (ASC0) for sal es or service www.ascopower.com 5100 Series, Catalog 5150 Connectivity Module For use with Automatic Transfer Switches, Power Manager, & Digital Power Meter Section Page Welcome ..................................................... ...

  • Emerson 5150 - page 2

    ii Welcome Connectivity Module Windows and Internet Explorer are registered trademarks of Microsoft Corporation. Who Should Use this Installation Manual This manual for the Connectivity Module should be used to assist individuals who will: • install the Connectivity Module (mount and wire) • configure the Connectivity Module • enter in inform ...

  • Emerson 5150 - page 3

    Connectivity Module Overview, Specifications, Installation Overview, DIP Switch iii Modbus is a registered trademark of Gould Inc. Overview The Connectivity Module brings together several different serial devices that communicate at different baud rates and with different protocols to a common Ethernet media. It can comm unicate with up to eight cl ...

  • Emerson 5150 - page 4

    iv Outline and Mounting Drawing Connectivity Module ...

  • Emerson 5150 - page 5

    v Wiring Diagrams Connectivity Module ...

  • Emerson 5150 - page 6

    Connectivity Module Wiring Diagrams vi ...

  • Emerson 5150 - page 7

    vii Wiring Diagrams Connectivity Module ...

  • Emerson 5150 - page 8

    Connectivity Module Wiring Di agrams viii ...

  • Emerson 5150 - page 9

    Connectivity Module Status LEDs ix Status LEDs LED LED Description LED Function / Mode of Operation POWER Power indication status. GREEN/AMBER Solid GREEN – functioning as a Connectivity Module (Acc. 72E). Solid AMBER – functioning as a Serial Module (Acc. 72A). RX Data receiving status. GREEN Blinking GREEN – indicates receiving data from a ...

  • Emerson 5150 - page 10

    1-1 Installation Connectivity Module How to Install the Connectivity Module on 7000 & 4000 Series and Series 300 ATSs The Connectivity Module (CM) mounts on a DIN rail under the ATS Controller (Group 5 & 1). A short serial cable connects the CM to the Controller. If a Power Manager (PM) or Digital Power Meter (DPM) is present, a long serial ...

  • Emerson 5150 - page 11

    Connectivity Module Installation 1-2 How to Install the Connectivity Module for a stand-alone Power Manager or Digital Power Meter The Connectivity Module (CM) mounts on a DIN rail near the Power Manager (PM) or Digital Power Meter (DPM). A long serial cable connects the Connectivity Module to the PM or DPM. Refer to installation drawings provided ...

  • Emerson 5150 - page 12

    1-3 Installation Connectivity Module How to View & Change Configuration Pages from a Connectivity Module To view and change confi guration pages on a client computer, follow these steps: 1. Be sure that your com puter is connected to the Internet. 2. Start Microsoft Internet Explorer browser on computer. 3. In the address bar, type in the addre ...

  • Emerson 5150 - page 13

    Connectivity Module 7000 & 4000 Series ATSs 2-1 Device Configurator Screen for 7000 & 4000 Series ATSs The Device Configurator Screen for 7000 & 4000 Series ATSs shows the Group 5 controller configuration settings (right side) and Connectivity Module (server) confi guration settings (left side) for the selected ATS. Group 5 Controller C ...

  • Emerson 5150 - page 14

    2-2 7000 & 4000 Series ATSs Connectivity Module Device Configurator Screen for 7000 & 4000 Series ATSs with a PM or DPM If a Power Manager (PM) or Digital Power Meter (DPM) is used with a 7000 & 4000 Series ATS, a button appears on the lower left corner of the Connectivity Module Device Configurator screen. Press the Config PM button to ...

  • Emerson 5150 - page 15

    Connectivity Module 7000 & 4000 Series ATSs 2-3 Detail Screen for 7000 & 4000 Series ATSs The Detail Screen for 7000 & 4000 Series ATSs shows the switch location, ratings, tim er settings, actual timer values, pickup and dropout settings, even t logging, and other status indications. Detail Screen for 7000 & 4000 Series ATSs with a ...

  • Emerson 5150 - page 16

    3-1 Series 300 ATSs Connectivity Module Device Configurator Screen for Series 300 ATSs The Device Configurator Screen for Series 300 ATSs shows the Group 1 controller configuration settings (right side) and the Connectivity Module (server) configuration settings (left side) for the selected ATS. Group 1 Controller Configuration (right side) Enter o ...

  • Emerson 5150 - page 17

    Connectity Module Series 300 ATSs 3-2 Device Configurator Screen for Series 300 ATSs with a PM or DPM If a Power Manager (PM) or a Digital Power Meter (DPM) is used with a Series 300 ATS, a button appears on the lower left corner of the Connectivity Module Device Configurator screen. Press the Config PM button to display the Power Manager or Power ...

  • Emerson 5150 - page 18

    3-3 Series 300 ATSs Connectivity Module Detail Screen for Series 300 ATSs The Detail Screen for Series 300 ATSs shows the switch location, ratings, timer settings, actual timer values, pickup and dropout settings, and other status indications. Detail Screen for Series 300 ATSs with a Power Manager The Detail Screen for Series 300 ATSs with a Power ...

  • Emerson 5150 - page 19

    Connectivity Module ASCO 940/962 ATSs 4-1 Device Configurator Screen for ASCO 940/962 ATSs The Device Configurator Screen for ASCO 940/962 ATSs shows the Group 7A controller configuration settings (right side) and the Connectivity Module (server) c onfiguration settings (left) for the selected ATS. Group 7A Controller Configuration (right side) Ent ...

  • Emerson 5150 - page 20

    4-2 ASCO 940/962 ATSs Connectivity Module Detail Screen for ASCO 940/962 ATSs The Detail Screen for ASCO 940/962 ATSs shows the switch location, ratings, timer settings, actual timer va lues, pickup and dropout settings, and other status indications. Detail Screen for ASCO 940/962 ATSs with a Power Manager The Detail Screen for ASCO 940/962 ATSs sh ...

  • Emerson 5150 - page 21

    Connectivity Module Stand-Alone Power Managers & Digital Power Meters 5-1 Device Configurator Screen for Power Manager or Digital Power Meter If a stand-alone Power Manager (PM) or Digital Power Meter (DPM) is used, a button appears on the lower left corner of the Connectivity Module Device Configurator screen. Press the Config PM button to dis ...

  • Emerson 5150 - page 22

    5-2 Stand-Alone Power Managers & Digital Power Meters Connectivity Module Detail Screen for Power Managers connected to a Load The Detail Screen for Power Managers shows energy levels, power measurements, settings, discrete I/O status, and other status inform ation. Detail Screen for Digital Power Meters connected to a Load The Detail Screen fo ...

  • Emerson 5150 - page 23

    Connectivity Module Stand-Alone Power Managers & Digital Power Meters 5-3 Detail Screen for Power Managers connected to a Generator The Detail Screen for Power Managers shows energy levels, power measurements, settings, discrete I/O status, and other status inform ation. Detail Screen for Digital Power Meters connected to a Generator The Detail ...

  • Emerson 5150 - page 24

    5-4 Stand-Alone Power Managers & Digital Power Meters Connectivity Module Detail Screen for Power Managers connected to a Circuit Breaker The Detail Screen for Power Managers shows energy levels, power measurements, settings, discrete I/O status, and other status inform ation. Detail Screen for Digital Power Meters connected to a Circuit Breake ...

  • Emerson 5150 - page 25

    Connectivity Module Ethernet TCP/IP Network Connections in Windows XP & 7 A-1 How to Create an Ethernet TC P/IP Network Connection in Windows XP & 7 1. Start Windows , then click the Start button. Select Control Panel . 2. Select Network Connections ( Windows XP ) or Network and Internet and/or Network and Sharing Center ( Windows 7 ). 3. W ...

  • Emerson 5150 - page 26

    A-2 Ethernet TCP/ IP Network Connections in Windows XP & 7 Connectivity Module 6. If the computer is on the company network contact the facilities IT personnel for appropriate settings. If it is a stand-alone com puter, enter the IP # for this computer that is listed on the Interface Diagram. For example: IP address: 169.254.1.2 (last digit mus ...

  • Emerson 5150 - page 27

    Connectivity Module Troubleshooting A-3 Troubleshooting the Connectivity Module Listed below are possi ble problems, their causes, possi ble solutions Problem Cause Solution DIAG red light blinks rapidly then stays on when the CM is first powered up. Duplicate IP address. The IP address of one or more CMs on the same network is set as same. Unplug ...

  • Emerson 5150 - page 28

    A-4 Create Favorites folder, 3 rd Party Modbus Configuration Connectivity Module How to create a Favorites folder for ASCO device pages and copy it to another computer To create a favorites folder and copy it to another user’s computer, the administrator should follow these steps: 1. Open the first page and then pull down the Favorites manual and ...

  • Emerson 5150 - page 29

    Connectivity Module SNMP Internet-standard Protocol A-5 How to set SNMP (Simple Network Ma nagement Protocol) Configuration Firmware 869764-003 and higher provides SNMP configuration. 1. On the Device Configuration screen (page 2-1 or 3-1) click the SNMP button at the bottom. 2. On the SNMP Configuration screen click the check box ; SNMP Enabled (t ...

  • Emerson 5150 - page 30

    A-6 SNMP Internet-standar d Protocol Connectivity Module Recommended ASCO SNMP MIB file A file containing 934904-xxx.mib can be dow nloaded from the location shown below. http://www.emersonnetworkpower.com/ en-US/Products/PowerSwitchingandCont rols/MonitoringandControl/Pages/ ASCO5150ConnectivityModuleAcc72E.aspx The 934904-xxx.mib file is written ...

  • Emerson 5150 - page 31

    Communication Address Form for Connectivity Module (CM) Row No. IP Address Subnet mask Gateway ATS Serial No. ATS Catalog No. Address set in ATS Controller* Address set in PM or DPM** Instructions: Fill in the information for each Connectivity Module (CM) with an ATS, Power Manager (PM), and/ or Digital Power Meter (DPM). * For Group 5 Controller ( ...

  • Emerson 5150 - page 32

    Printed in U.S.A. © ASCO Power Technologies, L.P. 2011 All Rights Reserved. INDEX A Access, NOTICE , ii AES encryption, iii, 2-1, 3-1, 4-1 Annunciators, ATS Remote, ii ASCOSNMP.MIB, A-5 ATS information needed, ii, communication address form ATS Remote Annunciators, ii C Cable, communication, iii CH1 , CH1 light, vii Change Password, 1-3 Circuit br ...

メーカー Emerson カテゴリー Switch

Emerson 5150のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 5150の取扱説明書
- Emersonの製品カード
- パンフレット
- またはEmerson 5150の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Emerson 5150の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Emerson 5150の取り付け説明書、サービスマニュアル、簡易説明書、またはEmerson 5150のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Emerson 5150の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Emerson 5150デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがEmerson 5150を使用するのを助ける技術的文書のことです。説明書は通常、全てのEmerson 5150ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Emersonの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Emerson 5150の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははEmerson 5150の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Emerson 5150に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Emerson 5150デバイスの基本機能を使うにあたってのヒント。 Emerson 5150のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Emerson 5150に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるEmerson 5150のメーカー/サービスへの連絡先に関する情報。

Emerson 5150についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもEmerson 5150の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがEmerson 5150で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)