Pfaff tipmatic 1027の取扱説明書

27ページ 関係なし
ダウンロード

ページに移動 of 27

Summary
  • Pfaff tipmatic 1027 - page 1

    c©j1 00 00 ...

  • Pfaff tipmatic 1027 - page 2

    K J Fold out this page Contents Removing the carrying case cover . Opening the top cover Removing and opening the swing-out arm Accessory box and accessory compartment Electrical connection Page 1 1 2 3 3 4 4 5 5 6 7 7 8 8 9 9 10 11 11 12 13 14 14 •15 15 4 Foot control Placing spool of thread on pin Upper threading Threading the needle Disengagin ...

  • Pfaff tipmatic 1027 - page 3

    c) 0 ...

  • Pfaff tipmatic 1027 - page 4

    Parts of your sewing machine Some safety rules I 30 Carrying handle 31 Hinged top cover 32 Hand wheel 33 Stop motion knob 34 Master switch 35 Finger-tip controls 36 Stitch length control 37 Swing-out sewing arm with accessory compartment 38 Needle plate 39 Sewing foot holder with sewing foot 40 Needle holder with screw 41 Needle thread tension 42 P ...

  • Pfaff tipmatic 1027 - page 5

    Removing the carrying case cover To lift off the carrying case cover, fold the handle to the rear, as indicated byan arrow. Then lift the cover off. Opening the hinged top cover Also fold the handle toward the rear. Swing cover 31 backwards. On Model 1027 a stitch chart is found on the inside of this cover (A). Removing and opening the swing-out ar ...

  • Pfaff tipmatic 1027 - page 6

    Accessory box and accessory compartment Tilt up the front of accessory box 46 and lift it out (A). There is an additional acces sory compartment (B) underneath. Ill. C shows how the snap-on sewing feet, the second spool holder and the seam ripper fit into the box. . C 0 a 0 I;— C 2 ...

  • Pfaff tipmatic 1027 - page 7

    Electrical connection Take the foot control out of the machine. Push plug B into the machine socket and plug C into the wall outlet. Press master switch 34. Your machine is now readyfor sewing. Foot control Place the foot control under the table. Press down the pedal, and the machine starts sewing. The more the pedal is depressed, the faster the ma ...

  • Pfaff tipmatic 1027 - page 8

    Placing spool of thread on pin A Small spools of thread: Push unreeling disc Don the spool holder in front of the spool of thread. B Large spools of thread: Push unreeling discs D and Eon the spool holder in front of the spool of thread, as shown in the drawing. C Second spool holder: This is contained in the accessory box and is used for bobbin wi ...

  • Pfaff tipmatic 1027 - page 9

    V Threading the needle Thread the needle from front to back. Disengaging the sewing mechanism Before you start winding the bobbin, disen gage the sewing mechanism. Hold the hand wheel steady and turn the stop motion knob toward you. After bobbin winding, tighten the knob again by turning it away from you. 5 ...

  • Pfaff tipmatic 1027 - page 10

    Winding the bobbin from a second spool (A) Disengage the sewing mechanism. Insert the spool holder and place a spool of thread on it. Place a bobbin on spindle 47 so that pin Centers slot D. Pull the thread from the spool, lead it around bobbin tension stud 55, wind it around the bobbin a few times and push the bobbin toward the right to start the ...

  • Pfaff tipmatic 1027 - page 11

    Removing bobbin case and bobbin Open free arm cover 48. Pull out latch K, then lift out the bobbin case, release the latch and take out the bobbin. The bobbin cannot fall out as long as you keep latch K pulled out. Inserting the bobbin Insert the filled bobbin into the bobbin case so that the thread unreels toward the back (A>. Then draw the thr ...

  • Pfaff tipmatic 1027 - page 12

    Inserting the bobbin case Pull out latch K and push the bobbin case onto stud B, making sure slot A is up. Release the latch and lightly press against the bobbin case to make sure it has snapped into place. Drawing up the bobbin thread Hold the needle thread a little taut. Turn hand wheel 32 toward you until the needle movesdownand upagainandthetak ...

  • Pfaff tipmatic 1027 - page 13

    Presser bar lifter Lever 42 has three positions: A = The sewing foot is raised. (Before you remove the work, turn the hand wheel toward you to raise the needle and take-up lever 52.) B = The sewing foot is raised further for inserting extra-thick materials. C The sewing foot is lowered for sewing. Thread cutter The thread cutter is an oblique slot ...

  • Pfaff tipmatic 1027 - page 14

    Upper tension (41) A = Setting mark. The normal tension setting is in the white range between 3 and 5. The higher the number, the tighter the tension. Lower tension B = Regulating screw. Turn it leftfora loosertension, or right for a tighter tension. C = Both tensions are correct D = Upper tension too loose or lower tension too tight. E Lower tensi ...

  • Pfaff tipmatic 1027 - page 15

    Regulating the stitch length Turn the control so that the number indi cating the stitch length chosen is opposite mark A. Stitch length range: Model 1025: 0—4 Model 1027: 0—6 Ill. B shows how to set the stitch length control for sewing stretch stitches (red stitch symbols on push buttons). Reverse sewing Push button 44. As long as you keep this ...

  • Pfaff tipmatic 1027 - page 16

    Finger-tip controls of model 1027 10 Elastic triple straight stitch Straight stitch 11 Pullover stitch Blindstitch 1 2 Closed overlock stitch Joining stitch 1 3 Overlock stitch Shell-edge stitch 14 Feather stitch Elastic decorative stitch 1 5 Honeycomb stitch Elastic stitch 1 6 Elastic triple zigzag stitch, 5 mm 5-mm zigzag stitch 17 Elastic triple ...

  • Pfaff tipmatic 1027 - page 17

    Finger-tip controls of model 1025 10 Elastic triple straight stitch Straight stitch 1 3 Overlock stitch Shell-edge stitch 14 Feather stitch Elastic decorative stitch 1 5 Honeycomb stitch Elastic stitch 1 6 Elastic triple zigzag stitch, 5 mm 5-mm zigzag stitch 1 7 Elastic triple zigzag stitch, 3.5 mm 3.5-mm zigzag stitch 1 8 Elastic triple zigzag st ...

  • Pfaff tipmatic 1027 - page 18

    Selecting utility stitches (white symbols) Push the desired button and turn the stitch length control to the number indicating the desired stitch length (1 —6 on model 1027, or 1—4 on model 1025). Selecting stretch stitches (red symbols) Push the desired button and turn the stitch length control as far as it will go (red symbol). ...

  • Pfaff tipmatic 1027 - page 19

    Utility- and stretch-stitch combinations, model 1027 The various stitch combinations are shown in the chart on the inside of the hinged top cover. For example, if you want to sew an elastic blindstitch, push buttons 1 5 and 1 6, select a stitch length between 1 and 4. This stitch can also be sewn with model 1025. Selecting the needle position for s ...

  • Pfaff tipmatic 1027 - page 20

    Dropping the machine feed Open free arm cover 48. Push the drop-feed control toward B. The feed dog is dropped (for embroidering, darning, etc.) For sewing, push the drop-feed control toward A. Changing the needle Raise the needle bar. Then hold the needle, loosen screw A and pull the needle out downwards. Insert a new System 1 30/705 H needle (wit ...

  • Pfaff tipmatic 1027 - page 21

    Changing the sewing foot To release the sewing foot push the red button A. When attaching a sewing foot make sure stud B enters slot C. Place the sewing foot under the sewing foot holder and hold it in place with your left hand. Lower presser bar lifter 42 and at the same time reposition the sewing foot so that stud B fits in slot C. Hole E and scr ...

  • Pfaff tipmatic 1027 - page 22

    Special sewing feet A Blindstitch foot Blindstich guide E is adjusted by turning screw D. B Zipper foot First insert its rear pin into groove F, then push its front pin into groove G. The zipper foot can be adjusted sideways for stitching along the right or left zipper chain. C Darning foot Remove the sewing foot holder and secure the darning foot ...

  • Pfaff tipmatic 1027 - page 23

    Sewing buttonholes Pull the bottom of the buttonhole foot for ward as far as it will go. 1 Sew first buttonhole seam. Turn hand wheel torward you to raise the needle. 2 Push button 20 and keep it depressed until the machine has sewn 4 to 6 bar- tacking stitches. Raise the needle. Then release the button. 3 Push button 21 . Sew the second button hol ...

  • Pfaff tipmatic 1027 - page 24

    Sewing feet A Normal sewing foot B Clear-view foot C Buttonhole foot D Hemmer foot I 98-694 E Zipper foot F Blindstitch foot G Darning foot H Guide A 98-694 563-00 D 98-694 401-00 20 ...

  • Pfaff tipmatic 1027 - page 25

    Changing the light bulb Push the light bulb up, turn it toward A and pull it out. Insert the new bulb so that its pins slide in slots C. Push it up and turn it toward B. Cleaning and oiling Tilt needle plate 38 up at the back (A) and take it out (B). Clean the machine feed and the parts in the vicinity of the sewing hook with a sàft brush. Do not ...

  • Pfaff tipmatic 1027 - page 26

    1. Machine skips stitches Needle not inserted correctly. Wrong needle used. Needle bent or blunt. Machine threaded improperly. Needle too thin for thread used. 2. Needle thread breaks For any of the above reasons. Thread tension too strong. Poor-quality or knotty thread used, or thread that has become too dry by excessive storage. 3. Needle breaks ...

  • Pfaff tipmatic 1027 - page 27

    4 Check upper and lower tensions. Use first-class thread only. During bobbin winding, do not hold thread in hand, but pass it through the bobbin tension stud. Thread machine properly and check both tensions. 5. Machine feeds irregularly or not at all Lint has accumulated between tooth rows of feed dog. Feed dog dropped. (Reverse-feed control is at ...

メーカー Pfaff カテゴリー Sewing Machine

Pfaff tipmatic 1027のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- tipmatic 1027の取扱説明書
- Pfaffの製品カード
- パンフレット
- またはPfaff tipmatic 1027の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Pfaff tipmatic 1027の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Pfaff tipmatic 1027の取り付け説明書、サービスマニュアル、簡易説明書、またはPfaff tipmatic 1027のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Pfaff tipmatic 1027の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Pfaff tipmatic 1027デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPfaff tipmatic 1027を使用するのを助ける技術的文書のことです。説明書は通常、全てのPfaff tipmatic 1027ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Pfaffの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Pfaff tipmatic 1027の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPfaff tipmatic 1027の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Pfaff tipmatic 1027に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Pfaff tipmatic 1027デバイスの基本機能を使うにあたってのヒント。 Pfaff tipmatic 1027のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Pfaff tipmatic 1027に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPfaff tipmatic 1027のメーカー/サービスへの連絡先に関する情報。

Pfaff tipmatic 1027についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもPfaff tipmatic 1027の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPfaff tipmatic 1027で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)