-
Chicago Electric 8878 - page 1
DENT REP AIR STUD WELDER Model 08878 ASSEMBL Y AND OPERA TION INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. ® 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com T O PREVENT SERIOUS INJUR Y , READ AND UNDERST AND ALL W ARNINGS AND INS ...
-
Chicago Electric 8878 - page 2
SKU 8878 For technical questions, please call 1-800-444-3353. Page 2 SPECIFICA TIONS Welding Process Resistance Weld Power Requirements 120 V , 60 Hz, ~40 A Peak Circuit Requirement 20 A Switch Push Button Power Cord 14 A WG x 3C / 3 prong grounded plug Features: High power low heat transformer with resettable safety breaker/ 2 lb. Slide Hammer , 1 ...
-
Chicago Electric 8878 - page 3
SKU 8878 For technical questions, please call 1-800-444-3353. Page 3 with a qualied electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user . Double insulated tools are equipped with ...
-
Chicago Electric 8878 - page 4
SKU 8878 For technical questions, please call 1-800-444-3353. Page 4 Use safety equipment. Always wear eye protection. Dust mask, nonskid safe- ty shoes, hard hat, or hearing protection must be used for appropriate conditions. T OOL USE AND CARE Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platfo ...
-
Chicago Electric 8878 - page 5
SKU 8878 For technical questions, please call 1-800-444-3353. Page 5 SPECIFIC SAFETY RULES Maintain labels and nameplates on the Stud Welder . These carry important infor- mation. If unreadable or missing, contact Harbor Freight T ools for a replacement. Inhalation Hazard W e l di n g / P la s m a C u t t in g P ro d u c e s T OX I C F U M E S a n ...
-
Chicago Electric 8878 - page 6
SKU 8878 For technical questions, please call 1-800-444-3353. Page 6 Avoid accidental activation. Unplug the Stud W elder while inserting the stud electrode into the Stud Welder . Avoid electrical shock. Do not operate the Stud W elder with its protective case removed. Do not touch grounded surfaces while operating W ARNING! This product, when used ...
-
Chicago Electric 8878 - page 7
SKU 8878 For technical questions, please call 1-800-444-3353. Page 7 and outlet should look like those in the following illustration. (See 3-Prong Plug and Outlet.) EXTENSION CORDS Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet incr ...
-
Chicago Electric 8878 - page 8
SKU 8878 For technical questions, please call 1-800-444-3353. Page 8 OPERA TION Note: Stud Electrode (23) Electrode Assembly (26) T rigger (17) FIGURE 1 Circuit Breaker Reset (20) For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 12. Caution: Always make sure the power cord to the St ...
-
Chicago Electric 8878 - page 9
SKU 8878 For technical questions, please call 1-800-444-3353. Page 9 Holding the Stud Welder rmly with both hands and using a well-balanced stance, rmly push the Stud (32) against the metal surface until the Electrode Assembly (26) is ush with the metal surface. See FIGURE 3 . With the Electrode Assembly (26) PERFECTL Y SQUARE to the surfa ...
-
Chicago Electric 8878 - page 10
SKU 8878 For technical questions, please call 1-800-444-3353. Page 10 INSPECTION, MAINTENANCE, AND CLEANING W ARNING! Make sure the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. BEFORE EACH USE, inspect the general condition of the Stud Welder . Check for loose screws, misalignme ...
-
Chicago Electric 8878 - page 11
SKU 8878 For technical questions, please call 1-800-444-3353. Page 1 1 P ARTS LIST Part Description Q’ty 1 Insulator Sleeve 1 2 Nut 2 3 W asher 2 4 Nut 2 5 Split Lock W asher 2 6 Braided Strap 1 7 Screw 6 8 Case (right) 1 9 W asher 4 10 Screw 1 1 1 Transformer 1 12 Insulator 1 13 Nut 8 14 Case (left) 1 15 Label 1 16 Cord 1 Part Description Q’ty ...
-
Chicago Electric 8878 - page 12
SKU 8878 For technical questions, please call 1-800-444-3353. Page 12 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS LIST AND ASSEM- BL Y DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y . NEITHER THE MANUF ACTURER OR DISTRIBUTOR MAKES ANY REPRESENT A TION OR W ARRANTY OF ANY KIND TO THE BUYER THA ...
Chicago Electric 8878についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもChicago Electric 8878の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがChicago Electric 8878で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。