日本語 dropdown-ico

Brother MFC-3200Cの取扱説明書

31ページ 5.14 mb
ダウンロード

ページに移動 of 31

Summary
  • Brother MFC-3200C - page 1

    Quick Setup Guide MFC-3200C Before you can use the MFC, you must set up the hardware and install the driver. Please read this “Setup Guide” for proper set up and installation instructions. For the latest driver and to find the best solution for your problem or question, access the Brother Solutions Center directly from the driver or go to http: ...

  • Brother MFC-3200C - page 2

    Carton components may differ from one country to another. Save all packing materials and the carton. Carton Components Quick Setup Guide CD-ROM User ’ s Guide ADF Document Support Paper Support Ink Cartridges (Black, Cyan, Yellow, Magenta) ADF Document Output Support Output Paper Support Accessory Order Form Card Stock Support One Touch Labels Te ...

  • Brother MFC-3200C - page 3

    1 Setting Up the MFC 1. Removing the Protective Yellow Bar .................................................................2 2. Install Handset .....................................................................................................2 3. Attaching the Paper Supports ...................................................................... ...

  • Brother MFC-3200C - page 4

    2 Setting Up the MFC Do NOT connect the USB cable. Connecting the USB cable is done when installing the driver. 1 Open the control panel cover by pulling it toward you ( 1 ), and then lift the top cover toward the back ( 2 ). 2 Pull the protective yellow bar out of the machine. 3 Close the top cover, and then close the control panel cover. 1 Connec ...

  • Brother MFC-3200C - page 5

    3 Setting Up the MFC Windows ® 98/98SE/Me/ 2000 Professional Windows ® XP Macintosh ® OS 8.5-9.2 Macintosh ® OS X 10.1 1 Attach the paper support to the paper tray. 2 Attach the ADF document support. 3 Attach the output paper support to the paper output slot, and then pull out the extension. 4 Attach the ADF document output support. 1 Fan the s ...

  • Brother MFC-3200C - page 6

    4 Setting Up the MFC 1 Connect the power cord. 2 Connect the telephone line cord. Connect one end of the telephone line cord to the jack on the MFC marked LINE and the other end to a modular wall jack. Do not connect the USB cable yet. Warning ■ The MFC must be grounded using a 3-prong plug. ■ Since the MFC is grounded through the power outlet, ...

  • Brother MFC-3200C - page 7

    5 Setting Up the MFC Windows ® 98/98SE/Me/ 2000 Professional Windows ® XP Macintosh ® OS 8.5-9.2 Macintosh ® OS X 10.1 Warning If ink gets in your eyes irrigate them with water immediately, and if irritation occurs consult a doctor. 1 Make sure that the power is turned on. The LCD shows; 2 Open the control panel cover by pulling it toward you ( ...

  • Brother MFC-3200C - page 8

    6 Setting Up the MFC 8 Gently insert the black ink cartridge in the black ink position. 9 Press the cover down until it clicks. 0 Repeat Steps 6 to 9 to install each color ink cartridge. Match the colors of the ink cartridge covers. A Close the top cover and control panel cover. The MFC will enter a head cleaning cycle for approximately four minute ...

  • Brother MFC-3200C - page 9

    7 Setting Up the MFC Windows ® 98/98SE/Me/ 2000 Professional Windows ® XP Macintosh ® OS 8.5-9.2 Macintosh ® OS X 10.1 1 The LCD shows: Check the quality of the four color blocks printed on the sheet. (BLACK/CYAN/YELLOW/MAGENTA) 2 If the quality is OK for all colors, press the key on the dial pad to go to STEP B : Alignment Check . ---OR--- If ...

  • Brother MFC-3200C - page 10

    8 Setting Up the MFC Choose the mode which best suits your needs by pressing the Receive Mode key repeatedly. The MFC displays the date and time, and prints it on every fax you send. 1 Press the Menu/Set key. 2 Press the key. 3 Press the key. 4 Enter the last two digits of the year on the dial pad, and then press the Menu/Set key. (e.g. Enter 0 , 3 ...

  • Brother MFC-3200C - page 11

    9 Setting Up the MFC Windows ® 98/98SE/Me/ 2000 Professional Windows ® XP Macintosh ® OS 8.5-9.2 Macintosh ® OS X 10.1 You should store your name and fax number to be printed on all fax pages that you send. 1 Press the Menu/Set key. 1 Press the Menu/Set key. 2 Press the key. 3 Press the key. 4 Enter your fax number (up to 20 digits) on the dial ...

  • Brother MFC-3200C - page 12

    10 Installing the Driver & Software You can find a variety of information on the CD-ROM. Install Software You can install printer, PC FAX Send, scanner drivers and the various utility items, including Paper Port and TextBridge OCR. On-Line Registration You will be pointed to a directory on the Brother Product Registration Web Page. On-Line Docu ...

  • Brother MFC-3200C - page 13

    11 Setting Up the MFC Windows ® 98/98SE/Me/ 2000 Professional Windows ® XP Macintosh ® OS 8.5-9.2 Macintosh ® OS X 10.1 Installing the Driver & Software Follow the instructions on this page for your operating system. Step 2 For Windows ® 98/98SE/Me/2000 Professional Users ................................................Go to page 12 For Wi ...

  • Brother MFC-3200C - page 14

    12 Installing the Driver & Software Make sure that you have completed the instructions from Step 1 “ Setting Up the MFC ” on pages 2 to 9. 1 Unplug the MFC from the AC outlet and disconnect it from your computer, if you already connected an interface cable. 2 Turn on your computer. (For Windows ® 2000 Professional, you must be logged on as ...

  • Brother MFC-3200C - page 15

    13 8 Enter your user information and click Next . 9 When the Choose Destination Location window displays the path where the PaperPort ® files will be installed, either change or accept, and then click Next . 0 When the Register Today screen is displayed, click Next and follow the on screen instructions. A When the Brother MFL Pro Suite Installatio ...

  • Brother MFC-3200C - page 16

    14 Installing the Driver & Software Make sure that you followed the instructions in steps 1 to 12 on pages 12 to 13. C When this screen appears, turn on the MFC by plugging in the power cord. Connect the Filter core and Cable tie to USB cable. Connect the USB interface cable to your PC, and then connect it to the MFC. . It will take a few secon ...

  • Brother MFC-3200C - page 17

    15 H The README.WRI file will be displayed. Please read this file for troubleshooting information and then close the file to continue installation. I Click Finish to restart your computer. J After the computer restarts, click Yes to have the Control Center loaded each time Windows is started. The Control Center will appear as an icon in the task tr ...

  • Brother MFC-3200C - page 18

    16 Installing the Driver & Software Make sure that you followed the instructions in steps 1 to 12 on pages 12 to 13. C When this screen appears, turn on the MFC by plugging in the power cord. Connect the Filter core and Cable tie to USB cable. Connect the USB interface cable to your PC, and then connect it to the MFC. . It will take a few secon ...

  • Brother MFC-3200C - page 19

    17 Make sure that you have completed the instructions from Step 1 “ Setting Up the MFC ” on pages 2 to 9. 1 Unplug the MFC from the AC outlet and disconnect it from your computer, if you already connected an interface cable. 2 Turn on your computer. (For Windows ® XP, you must be logged on as the administrator.) 3 Insert the supplied CD-ROM in ...

  • Brother MFC-3200C - page 20

    18 Installing the Driver & Software 7 When the PaperPort ® 8.0 SE Setup window is displayed, click Next . 8 After reading and accepting the License Agreement, enter your user information and click Next . 9 Select Typical and click Next . 0 Click Install and PaperPort ® will start installing on your computer. A When the Registration screen is ...

  • Brother MFC-3200C - page 21

    19 C When this screen appears, turn on the MFC by plugging in the power cord. Connect the Filter core and Cable tie to USB cable. Connect the USB interface cable to your PC, and then connect it to the MFC. . It will take a few seconds for the installation screen to appear. The installation of the Brother driver will automatically start. Follow the ...

  • Brother MFC-3200C - page 22

    20 Installing the Driver & Software H The installation process will now start. I If this screen appears, select the model of the machine which you want to use to send PC-Faxes then click OK . J Select “ Yes ” to restart your computer, and then click Finish . *2 *2 If an error message appears during the installation process, or if you have p ...

  • Brother MFC-3200C - page 23

    21 Make sure that you have completed the instructions in steps 1 to 20 on pages 17 to 20. Make sure that USB cable is connected between the MFC and your PC and both powered ON. K Click “ Start ” and select “ Printers and Faxes ” . L Click on “ Add a printer ” and the Add Printer Wizard will start. M When the above screen appears, click ...

  • Brother MFC-3200C - page 24

    22 Installing the Driver & Software R Click Open . S Make sure “ X: WXP Addprt ” is displayed in the window and click OK (X: is the drive letter of your CD-ROM). T Highlight the model you are installing from the list of machines and click Next . U The model you are installing will be listed in the window. Select Yes or No if you want th ...

  • Brother MFC-3200C - page 25

    23 X When the above screen appears click Finish . Y When the Windows Logo testing screen appears click Continue Anyway . This completes the installation of the Brother Native Driver. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. There will be two Brother printer drivers listed in the Print ...

  • Brother MFC-3200C - page 26

    24 Installing the Driver & Software Make sure that you have completed the instructions from Step 1 “ Setting Up the MFC ” on pages 2 to 9. 1 Unplug the MFC from the AC outlet and disconnect it from your Macintosh if you already connected an interface cable. 2 Turn on your Macintosh ® . 3 Insert the supplied CD-ROM into your CD- ROM drive. ...

  • Brother MFC-3200C - page 27

    25 9 Click the MFL Pro Color icon you installed. On the right side of the Chooser , select the printer to which you want to print. Close the Chooser . The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. 0 To install PaperPort ® , double-click the PaperPort ® 5.5 Installer icon.*1 Follow the in ...

  • Brother MFC-3200C - page 28

    26 Installing the Driver & Software Make sure that you have completed the instructions from Step 1 “ Setting Up the MFC ” on pages 2 to 9. 1 Unplug the MFC from the AC outlet and disconnect it from your Macintosh if you already connected an interface cable. 2 Turn on your Macintosh ® . 3 Insert the supplied CD-ROM into your CD- ROM drive. ...

  • Brother MFC-3200C - page 29

    27 0 Open the Printer Center icon. A Click Add Printer... . B Select USB . C Select MFC-3200C , and then click the Add . D Select Quit Printer Center from the Printer Center menu. The Brother Printer driver and Remote Setup Program have been installed and the installation is now complete. Setting Up the MFC Macintosh ® OS X 10.1 Installing the Dri ...

  • Brother MFC-3200C - page 30

    Trademarks The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademark of Brother Industries, Ltd. Multi-Function Link and PhotoCapture Center are a registered trademark of Brother Industries, Ltd. © Copyright 2002 Brother Industries, Ltd. All rights reserved. Windows and Microsoft, MS-DOS, Excel and Wo ...

  • Brother MFC-3200C - page 31

    ©2002 Brother Industries, Ltd. ...

メーカー Brother カテゴリー Indoor Furnishings

Brother MFC-3200Cのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- MFC-3200Cの取扱説明書
- Brotherの製品カード
- パンフレット
- またはBrother MFC-3200Cの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Brother MFC-3200Cの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Brother MFC-3200Cの取り付け説明書、サービスマニュアル、簡易説明書、またはBrother MFC-3200Cのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Brother MFC-3200Cの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Brother MFC-3200Cデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがBrother MFC-3200Cを使用するのを助ける技術的文書のことです。説明書は通常、全てのBrother MFC-3200Cユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Brotherの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Brother MFC-3200Cの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははBrother MFC-3200Cの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Brother MFC-3200Cに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Brother MFC-3200Cデバイスの基本機能を使うにあたってのヒント。 Brother MFC-3200Cのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Brother MFC-3200Cに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるBrother MFC-3200Cのメーカー/サービスへの連絡先に関する情報。

Brother MFC-3200Cについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもBrother MFC-3200Cの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBrother MFC-3200Cで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)