Konica Minolta Range7の取扱説明書

26ページ 2.47 mb
ダウンロード

ページに移動 of 26

Summary
  • Konica Minolta Range7 - page 1

    Non-contact 3D Digitizer Instruction Manual Read and understand all instructions before using.   / ...

  • Konica Minolta Range7 - page 2

    The followin g symbols are used in t his manual to prevent accidents whi ch may occ ur as a result of inc orre ct use of the instr ument. Denotes a sentence regarding a safet y warning or note. Read the sentence carefully to ensure sa fe and correc t use. Denotes a prohibited operat ion. The operation must nev er been per forme d. Denotes an instru ...

  • Konica Minolta Range7 - page 3

    1 Whenusingt hishandware,thefoll owingpointsmustbest ric tlyobser vedtoensurecor rec tandsafeuse.Af ter youhav ereadthismanual,keepitinasafeplacewh ereitcanb ereferredtoany timeaquesti onar ises. W ARNING (F ailuretoadhereto ...

  • Konica Minolta Range7 - page 4

    2 Foreword Notes On Use • WeshallguaranteetheRANGE7/5operationat10°Cto40°Cambienttemperatureand65%orlessrelative humidity .EnsurethattheRANGE7/5operatingenvironmentiswithinthisrange. • TheRANGE7/5hasbeencalibratedat20°C.Itis? ...

  • Konica Minolta Range7 - page 5

    3 <FRONT> <REAR> RANGE7/5 Laser Label Indication W arning and instruction labels about the laser Other warning label ...

  • Konica Minolta Range7 - page 6

    4 About this Manual (Contents) Contents and Descriptions This instruction manual provides the following contents about preparations for use of the RANGE7/5. • Precautions for Use • Part Names and Functions • System Conguration and Accessories • Setup Procedure for Measurement with the RANGE7/5 • RANGE7/5 Measuring Steps (Images) • Me ...

  • Konica Minolta Range7 - page 7

    5 About the RANGE7/5 n System Diagram <RANGE7> Light-receiving lens (TELE, WIDE) KONICA MINOLTA RANGE7 AC adapter AC power cord USB Cable (5m) IF-A22 : Europe only (3m) IF-A18 Marker sheet trial pack (T, W markers: 500 pcs each) RANGE VIEWER Rapidform® XOV TM / XOR TM Personal computer (Commercially available) Standard accessories Optional a ...

  • Konica Minolta Range7 - page 8

    6 <RANGE5> KONICA MINOLTA RANGE5 USB Cable (5m) IF-A22 : Europe only (3m) IF-A18 Marker sheet trial pack (Marker: 500 pcs) Personal computer (Commercially available) Standard accessories Optional accessories RANGE VIEWER 3D data processing software Rotating Stage (3 kg) Rotating Stage (20 kg) Tripod set RA-A121 Platform set for Tripod RA-A151 ...

  • Konica Minolta Range7 - page 9

    7 n Names of Parts and Functions 1) Carrying handle  UsedtoliftorcarrytheRANGE7/5.(BesuretoholdtheRANGE7/5bodywithbothhands.) 2) Light-receiving lens  Exchange the light-receiving lens for an optimum lens (T eleor Widelens), depending on themeasuring? ...

  • Konica Minolta Range7 - page 10

    8 n Dimensions 199.6 48.3 ø74.7 ø66 ø 35 ø61.5 9.1 141 387.9 20.8 57.7 57.7 197.7 ø15 9 189.6 292.4 55° 248 1 1 1 (Unit:mm) ...

  • Konica Minolta Range7 - page 11

    9 Installation and Setup n Installation This section describes the RANGE7/5 installation procedures and precautions for installation. <Installation procedure> T o install the RANGE7 /5, you can use the following three methods: 1) Direct installation on a table or like surface (including a measuring table prepared by user) 2) Installation usin ...

  • Konica Minolta Range7 - page 12

    10 3) Installation using the measuring stand set (under optional accessories) Mount the RANGE7/5 to the measuring stand platform (under optional accessories). NOTE • Before mounting the RANGE7/5, make sure that the measuring stand platform is properly mounted to the measuring stand. * For the procedure on how to mount the measuring stand platform ...

  • Konica Minolta Range7 - page 13

    11 T o execute measurement using the RANGE7, mount an optimum lens depending on the measuring target size and the measuring distance, and install the RANGE7 at an optimum position relative to the measuring target. (No replacement lens for RANGE5. ) The following is an example of the ordinary RANGE7/5 setup using the tripod setting (under optional a ...

  • Konica Minolta Range7 - page 14

    12 <Setup procedure> This section describes the procedure for installing the RANGE7/5 properly , and completing the preparations for measurement. Make preparations according to the following procedures: 1) Installing the RANGE7/5. 2) Set the RANGE7/5 at a position relative to the proper target, and mount the lens suitable in question as the t ...

  • Konica Minolta Range7 - page 15

    13 Changing of Lens (RANGE7 only) Set the RANGE7 at a position proper to the measuring target, and exchange the lens for an optimum one, depending on the measuring target size and the distance between the RANGE7 and the measuring tar get. NOTE When changing the lens, conrm that the lens number is the same number as the RANGE7 body . Memo RANGE7 ...

  • Konica Minolta Range7 - page 16

    14 3) Connecting the AC adaptor 1) Connect the AC cable to the AC adaptor for the RANGE7/5. 2) Insert the AC adaptor plug of the dedicated AC adaptor (AC-A324) to the AC adaptor connection terminal on the right of the RANGE7/5 rear panel. 3) Insert the AC cable plug connected to the AC adaptor to a 100 V AC main outlet. NOTE Insert the plug securel ...

  • Konica Minolta Range7 - page 17

    15 5) T urning power on/off 1) Push the white power button in the upper right part of the rear panel of the RANGE7/5. A short beep sounds, the power is switched on, and the power button is lit yellow-green. 2) W arming-up of the RANGE7/5 starts when the laser shutter is opened. Memo • RANGE7/5 needs to warm up for about 20 minutes after being swi ...

  • Konica Minolta Range7 - page 18

    16 n About Field Calibration Calibration sheet The gure below shows an example of setting up the RANGE7/5 for calibration using the Calibration Set. Enough space is needed to spread out the sheet. 1280×430 mm Set the calibration chart in the position marked on the sheet for the lens being used. Memo For RANGE5, place in the position off the WID ...

  • Konica Minolta Range7 - page 19

    17 n Installation and Measurement (Image) Measuring Steps (Images) ExampleofinstallationonMeasuringStandSetRA-A200(optionalaccessory) ExampleofinstallationonT ripodSetRA-A121(optionalaccessory) ...

  • Konica Minolta Range7 - page 20

    18 n Shooting and Focusing (Image) n Scanning (Image) ...

  • Konica Minolta Range7 - page 21

    19 T roubleshooting If you have some problems when using the RANGE7/5, please refer to the following table to check on the situation. The RANGE7/5 operation is controlled by the 3D processing software “RANGE VIEWER”. The RANGE VIEWER monitor ...

  • Konica Minolta Range7 - page 22

    20 Other Information n Measuring Principles <Basic Principle> TheRANGE7/5usesthelightsectioningmethodtoemitahorizontalstripelightthroughacylindricallenstotheobject. ThereectedlightfromtheobjectisreceivedbytheCMOSsensor ,andthenconvertedby? ...

  • Konica Minolta Range7 - page 23

    21 n Specications MODEL NAME KONICA MINOL T A RANGE7 Measuring Method T riangulation by light sectioning method Light-Source Semiconductorlaserλ=660nm LaserClassication Class2(IEC60825-1edition2) Sensor Name CMOSPhotodiode Pixel 1.31MegaPixel(1280x1024) MeasuringDistance(mm) 450? ...

  • Konica Minolta Range7 - page 24

    22 MODEL NAME KONICA MINOL T A RANGE5 Measuring Method T riangulation by light sectioning method Light-Source Semiconductorlaserλ=660nm LaserClassication Class2(IEC60825-1edition2) Sensor Name CMOSPhotodiode Pixel 1.31MegaPixel(1280x1024) MeasuringDistance(mm) 450to800(Dist ...

  • Konica Minolta Range7 - page 25

    ...

  • Konica Minolta Range7 - page 26

    9222-A0V8-49 BCEBPF ©2009-2012 KONICA MINO LT A OPTICS, INC. ...

メーカー Konica Minolta カテゴリー Graphics Tablet

Konica Minolta Range7のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- Range7の取扱説明書
- Konica Minoltaの製品カード
- パンフレット
- またはKonica Minolta Range7の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Konica Minolta Range7の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Konica Minolta Range7の取り付け説明書、サービスマニュアル、簡易説明書、またはKonica Minolta Range7のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Konica Minolta Range7の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Konica Minolta Range7デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがKonica Minolta Range7を使用するのを助ける技術的文書のことです。説明書は通常、全てのKonica Minolta Range7ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Konica Minoltaの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Konica Minolta Range7の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははKonica Minolta Range7の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Konica Minolta Range7に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Konica Minolta Range7デバイスの基本機能を使うにあたってのヒント。 Konica Minolta Range7のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Konica Minolta Range7に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるKonica Minolta Range7のメーカー/サービスへの連絡先に関する情報。

Konica Minolta Range7についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもKonica Minolta Range7の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがKonica Minolta Range7で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)