-
Bosch PWS 9-125 CE - page 1
* Des idées en action. Bedienungsanleitung Operating instructions Instructions d’emploi Instrucciones de servicio Manual de instruções Istruzioni d’uso Gebruiksaanwijzing Betjeningsvejledning Bruksanvisning Brukerveiledningen Käyttöohje Οδηγία χειρισµού Kullan∂m k∂lavuzu Deutsch English Français Español Português Ital ...
-
Bosch PWS 9-125 CE - page 2
2 • 2 609 000 397 • 04.08 2 605 703 031 1 605 703 099 1 600 210 039 1 603 340 031 2 603 340 018 1 603 340 040 1 607 950 040 2 607 950 037 1 602 025 024 1 601 329 013 1 605 510 281 2 605 730 036 1 600 793 007 2 605 510 066 1 605 510 291 2 605 438 169 (M 10) (M 14) (M 14) (M 14) (M 10) (M 14) (M 10) (M 14) Ø 100 mm Ø 115/125 mm 2 x 2 605 510 19 ...
-
Bosch PWS 9-125 CE - page 3
3 • 2 609 000 397 • 04.08 2 609 000 397.book Seite 1 Donnerstag, 26. August 2004 1:27 13 ...
-
Bosch PWS 9-125 CE - page 4
4 + 5 • 2 609 000 397 • 04.08 D IAMOND Laser 6 6 9 13 12 16 12 6 14 6 15 3 1 2 5 4 8 7 6 11 10 11 4 10 18 17 8 PWS 9-125 CE 2 609 000 397 - U4+5 Seite 4 Donnerstag, 26. August 2004 12:59 12 ...
-
Bosch PWS 9-125 CE - page 5
English - 1 Speed Preselection (Type CE) The machine is intended for cutting, roughing and brushing metal and stone materials without using water. For cutting stone, a cutting guide is re- quired. For machines with electronic control: With ap- proved sanding tools, the machine can be used for sanding and polishing. Tool Specifications Angle Grinder ...
-
Bosch PWS 9-125 CE - page 6
English - 2 Measured values determined according to EN 50 144. Typically the A-weighted noise levels of the ma- chine are: Sound pressure level: 88 dB (A); sound power level: 101 dB (A). Wear hearing protection! When using the standard auxiliary handle, the typically weighted maximum acceleration is 5.3 m/s 2 . When using the vibration-dampening au ...
-
Bosch PWS 9-125 CE - page 7
English - 3 ■ When performing an operation where the tool insert can run into concealed electric lines, hold the machine by the insulated handles only. Contact with a “ live ” wire will make exposed metal parts of the tool “ live ” and shock the op- erator. ■ Use suitable detectors to determine if util- ity lines are hidden in the work ...
-
Bosch PWS 9-125 CE - page 8
English - 4 ■ Before any work on the machine itself, pull the mains plug. Protection Guard ■ For work with grinding or cutting discs, the pro- tection guard 6 must be mounted. Open the clamping lever 7 . Place the protection guard 6 onto the spindle col- lar of the machine head as shown in the illustra- tion. The encoding keys of the protection ...
-
Bosch PWS 9-125 CE - page 9
English - 5 Grinding- / Cutting Disc Observe the dimensions of the grinding discs. The hole diameter must fit mounting flange 8 (M 14), 19 (M 10). Do not use any re- ducers or adapters. When using a diamond cutting disc, take care that the direction-of-rotation arrow on the dia- mond cutting disc and the direction of rotation of the machine (direct ...
-
Bosch PWS 9-125 CE - page 10
English - 6 A properly tightened undamaged, quick- clamping nut can be loosened by hand turning the knurled ring by hand in an an- ticlockwise direction. Never loosen a tight quick-clamping nut with pliers but use a two-pin spanner. In- sert the two-pin spanner as shown in the illustration. All grinding tools mentioned in these operating in- struct ...
-
Bosch PWS 9-125 CE - page 11
English - 7 Flap Disc With the flap disc (accessory), curved surfaces and profiles (contour sanding) can be worked. Flap discs have a considerably higher service life than sanding sheets, lower noise level and lower sanding temperatures. Cutting When cutting, do not press, tilt or oscillate the machine. Work with moderate feed, adapted to the ma- t ...
-
Bosch PWS 9-125 CE - page 12
English - 8 Recycle raw materials instead of disposing as waste The machine, accessories and packaging should be sorted for environmental-friendly recycling. These instructions are printed on recycled paper manufactured without chlorine. The plastic components are labelled for catego- rised recycling. Exploded views and information on spare parts c ...
-
Bosch PWS 9-125 CE - page 13
Robert Bosch GmbH Geschäftsbereich Elektrowerkzeuge 70745 Leinfelden-Echterdingen www.bosch-pt.com 2 609 000 397 (04.08) O / 113 Printed in Hungary - Imprimé en Hongrie Chlor * Des id é es en action. 2 609 000 397.book Seite 1 Donnerstag, 26. August 2004 1:27 13 ...
Bosch PWS 9-125 CEについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもBosch PWS 9-125 CEの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBosch PWS 9-125 CEで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。