-
Star Trac E-RB - page 1
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 1 Universal PVS Kit Star Trac Fitness ™ E - TR , E - TBT, E - RB, and E - UB S - TR , S - TBT, S - RB, and S - UB I NSTAL LATION M ANUAL ...
-
Star Trac E-RB - page 2
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 2 T ABLE OF C ONTENTS Introduction .............................................................................................................................................. 4 Before You Get Started ....................................................................................................... ...
-
Star Trac E-RB - page 3
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 3 E & S TBT, RB, and UB E & S TR ...
-
Star Trac E-RB - page 4
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 4 A BOUT THIS MANUAL This manual is applicable to the STAR TRAC E - Series & S - Series Products. The manual is divided into eight sections, as follows: Introduction Provides an overview of each section within the manual. Before You Get Started Provides guideli nes to help you have a successful instal ...
-
Star Trac E-RB - page 5
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 5 CHECK FACILITIES PREPAREDNESS For a proper installation, please read this guide thoroughly and follow the instructions. Star Trac’s goal is to help you have a successful and reliable installation, for this reason we have come up with some helpful tips and check list to accomplish this goal. ...
-
Star Trac E-RB - page 6
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 6 CAUTION: Disconnect power before doing any installation. Required Tool for Installation Supplied : • 5MM Hex Allen Key • 3MM Hex Allen Key • #2 Phillips Screwdriver • Flat Screwdriver ...
-
Star Trac E-RB - page 7
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 7 I NSTALLING YOUR U NIVERSAL TV B RACKET K IT The Star Trac Universal PVS Kit is different for each of your Star Trac E or S Series Cardio prod ucts. Make sure you have the proper kit for the E or S Series produ ct you are installing. The E - & S - U B, E - & S - RB, E - & S - TBT, and E - &a ...
-
Star Trac E-RB - page 8
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 8 STEP4 Remove the cap cov er with the Star Trac logo from the plastics by rem oving the (2) screws using a #2 Phillips screwdriver. Retain the screws for later use . You will no longer need the cap cover and, if desired, you can store it away for any possible future use. STEP 5 Remove the (2) M8 button h ...
-
Star Trac E-RB - page 9
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 9 STEP7 Adjust the cap with the grommet into place. Using the 5mm Hex Key, tighten the M8 Button head screws to about 190 l b - in (21.5 N - m) of torque. Take the (2) Phillips head screws you removed from the original cap and snugly tighten screws down using a #2 Phillips screwdriver. STEP 8 Connect the ...
-
Star Trac E-RB - page 10
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 10 To install the TV neck on the E - TR, follows the se steps: STEP1 Using a #2 Phillips screwdriver, to remove the (8) screws from the upper back of the display. Place the cover s ome where safe to keep it from being damaged. Next, to remove the (6) screws from the lower back of the display. Place the co ...
-
Star Trac E-RB - page 11
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 11 STEP4 Mount the Personal Viewing Screen on the Treadmill. Using the 5mm Hex Allen Key , screw in the (2) M8 Button heads at the base of the PVS. STEP5 Adjust the displ ay cap up or down to align with the holes on the display front. Once the cap is aligned, tighten the button head screws with the 5mm He ...
-
Star Trac E-RB - page 12
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 12 To install the TV neck on the S - UB, S - RB, and S - TBT, follows these steps: STEP1 Remove the TV hole cover: On the back side of the neck tubing, u sing a flat screwdriver, unclench the TV hole cover from the notch. (The cover is not used anymore, but you may save it for future use as you lik e.) ST ...
-
Star Trac E-RB - page 13
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 13 To install the TV neck on the S - TR, follows these steps: STEP 1 Using a #2 Phillips screwdriver, to remove the ( 19 ) screws from the back of the display. Next, remove the back cover and the upper cap cover with “Star Trac Logo on it ( You will no longer need this cap cover and, if desired, you can ...
-
Star Trac E-RB - page 14
STAR TRAC UNIVERSAL TV BRACKET INSTALLATION 14 To install the TV on the bracket follows these steps: Install your TV onto the bracket, by using a 3mm Hex Allen Key to fasten (4) M4 socket head screws and (4) washers , as shown. And then, insert the tubing cap on the tube opening. Step 1 If the mounting hole pattern on your TV is 75x75mm, you have t ...
-
Star Trac E-RB - page 15
STAR TRAC E&S SERIES UNIVERSAL PVS INSTA LLATION MANUAL 15 STAR TRAC 14410 Myford Road Irvine, California 92606 Telephone: (800) 228 - 6635, (714) 669 - 1660 Fax: (714) 508 - 3303 http://www.startrac.com P/N: 620 - 7841 , Rev. B ...
Star Trac E-RBについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもStar Trac E-RBの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがStar Trac E-RBで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。