Yamaha DME32の取扱説明書

12ページ 3.45 mb
ダウンロード

ページに移動 of 12

Summary
  • Yamaha DME32 - page 1

    Hardware Setup Guide ...

  • Yamaha DME32 - page 2

    1. Available I/O Options DME32 has four "MY-Card"(Mini-Yamaha Generic Digital Audio Interface) Slots for I/O. Each card slot can handle up to 8 channels of I/O for a maximum of 32 I/O per DME32 unit, depending on the cards chosen. MY8-AT Eight ADAT Digital Inputs and Outputs on Optical Connectors The current MY-Cards available from Yamaha ...

  • Yamaha DME32 - page 3

    These are the current Remotable External Input/Output devices from Yamaha: AD824 Eight 24-bit Mic/Line Level Inputs on XLR, with Balanced Inserts on 1/4” TRS connectors, and +48V Phantom Power. All Functions (Gain Trim and Phantom Power On/Off) can be controlled remotely via RS-422 (up to 200 meters away). This device accepts one digital MY-Card ...

  • Yamaha DME32 - page 4

    2. Analog Line Level Only Here are some examples of utilizing all four card slots for maximum analog line-level card I/O, and the cards required: 4 XLR Inputs, 12 XLR Outputs: (1) MY4-AD (3) MY4-DA 8 XLR Inputs, 8 XLR Outputs : (2) MY4-AD (2) MY4-DA 12 XLR Inputs, 4 XLR Outputs : (3) MY4-AD (1) MY4-DA Of course, there are more combinations than the ...

  • Yamaha DME32 - page 5

    3. Digital I/O Each of the digital MY-Cards are capable of 8 channels of input and output (MY8-AE, MY8-AT, MY8- TD). Different format cards can be used together in a single DME32 unit. You can also mix analog and digital cards together in a single DME32 unit. For 8 Channels of Digital I/O: Use one digital MY8 card. For 16 Channels of Digital I/O: U ...

  • Yamaha DME32 - page 6

    4. Using the AD824 and DA824 The AD824 and the DA824 have MY-Card slots as well. Using digital MY-Cards, an audio connection between the DME32 and the AD824 and/or DA824 can be established. Using AES/EBU (MY8-AE Cards), distances of 200 meters can be achieved. Using ADAT optical transmission (MY8-AT cards), you can separate the units by 6 meters. 8 ...

  • Yamaha DME32 - page 7

    AES/EBU AES/EBU AES/EBU AES/EBU AES/EBU AES/EBU DME32 AD824 DA824 AD824 DA824 Split AES/EBU Cable Split AES/EBU Cable A 16-Channel I/O sytem using AES/EBU transmission. Up to 200 meters of separation between the DME32 and the I/O components is possible. In the example above, a split AES/EBU cable is utilized to connect the DME32 to the AD824 and DA ...

  • Yamaha DME32 - page 8

    5. Creating Split AES Cables The MY8-AE Card is capable of 8 AES/EBU inputs and outputs via a 25-pin Female D-sub connector. In order to use this card with a DME32 and AD824/DA824 configuration, a split AES/EBU cable must be created. You must use shielded 110-ohm twisted-pair AES cable and 25-pin Male D-sub connector on each end. Up to 200 meters D ...

  • Yamaha DME32 - page 9

    All that is required is 8 twisted-pairs of shielded 110-ohm wire. Pin to pin ground connections are optional as long as the shield is connected to the connector hood. The twisted pairs are as follows: 1 14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 Input 1/2 Input 3/4 Input 5/6 Input 7/8 Output 1/2 Output 3/4 Output 5/6 Output 7/8 T wisted Pairs Signal Des ...

  • Yamaha DME32 - page 10

    6. AD824 Connection for Remote Control The AD824 can be controlled remotely from the DME32 via RS-422. Gain Control and Phantom Power On/Off can be manipulated and recalled by the DME32. In order to do this, RS-422 Cables need to be run from the DME32 to the first AD824, and then daisy-chained to subsequent AD824 units. DME32 AD824 #1 AD824 #2 AD82 ...

  • Yamaha DME32 - page 11

    AD824 ID numbers are automatically set by their position in the chain. The first AD824 connected to DME32 is unit #1, and the second AD824 is unit #2, and so on. The IDs have no relation to the slot number they are plugged into. The ID numbers should be noted and will be used by the software to address them. This is the pin configuration for the RS ...

  • Yamaha DME32 - page 12

    AES/EBU AES/EBU AES/EBU AES/EBU AES/EBU AES/EBU Split AES/EBU Cable Serial Cable Split AES/EBU Cable AD824 DME32 DA824 AD824 DA824 A 16-Channel I/O sytem using AES/EBU transmission. An RS-422 connection is also made to remotely control the AD824 functions. Up to 200 meters of separation between the DME32 and the I/O components is possible. Serial C ...

メーカー Yamaha カテゴリー Home Theater System

Yamaha DME32のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- DME32の取扱説明書
- Yamahaの製品カード
- パンフレット
- またはYamaha DME32の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Yamaha DME32の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Yamaha DME32の取り付け説明書、サービスマニュアル、簡易説明書、またはYamaha DME32のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Yamaha DME32の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Yamaha DME32デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがYamaha DME32を使用するのを助ける技術的文書のことです。説明書は通常、全てのYamaha DME32ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Yamahaの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Yamaha DME32の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははYamaha DME32の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Yamaha DME32に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Yamaha DME32デバイスの基本機能を使うにあたってのヒント。 Yamaha DME32のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Yamaha DME32に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるYamaha DME32のメーカー/サービスへの連絡先に関する情報。

Yamaha DME32についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもYamaha DME32の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがYamaha DME32で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)