ページに移動 of 54
SV110 7IPEX T KVM over IP with Virtual Media ...
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital de- vice, pursuant to par t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interf erence in a residential installation. This equipment generates, uses and can radiate radio frequency ener ...
Instruction Manual i Instruction Manual T able of Contents Introduction ................................................................................... 1 Features ...................................................................................... 1 P ackage Contents ....................................................................... 1 Ha ...
Instruction Manual ii User Station Filtering – MAC Addresses ..................................... 21 Custom SSL Cer tificates ............................................................. 21 User Management ....................................................................... 22 Customization .................................................. ...
Instruction Manual 1 Introduction The SV1107IPEXT Server Remote Control KVM ov er IP with Vir tual Me- dia capability enables simple management of remote servers from any- where in the world, through remote administrative control, while pro viding a conv enient wa y to monitor computers and ser vers ov er a network, or ov er the Internet. The SV110 ...
Instruction Manual 2 Hardware Requirements For best results , we recommend that the computers used to access the SV1107IPEXT control unit hav e at minimum a P entium III 1 GHz proces- sor , with the screen resolution set to 1024 x 768. Browsers must support 128-bit SSL data encr yption • Recommended Internet connection speed: at least 128 kbps ...
Instruction Manual 3 Hardware Guide 1 2 3 4 5 Component Description 1 Reset Switch System Reset: Pressing and holding this switch in f or more that three seconds performs a system reset Restore Factory Default Settings: P ower off the SV1107IPEXT , then press and hold the reset switch for at least 3 seconds while reconnecting po wer Please Note: Th ...
Instruction Manual 4 Hardware Guide - Cont’d Please Note: if you are using a wireless k eyboard/mouse set, connect the receiver to the K eyboard por t of the KVM cable Component Description 1 P ower Jac k The power adapter connection 2 PC/KVM P ort The connection for the cab le that links the SV1107IPEXT to your computer 3 USB Console P ort This ...
Instruction Manual 5 Computer Preliminary Setup Find your computer’ s IP address and default Gate wa y b y doing the follo w- ing: Click on 1. Start , then RUN . Enter 2. CMD in the text bo x. Click on [ 3. OK ] or press the [ Enter ] ke y . When the command line window opens, T ype 4. ipconfig , then press Enter : Look for the heading that sa y ...
Instruction Manual 6 SV1107IPEXT Preliminary Setup Connect the SV1107IPEXT and your computer to y our network using the follo wing diagram. This is a preliminary set up, so no other connections are needed. Most home networks use automatic IP Addressing, and the SV1107I- PEXT is provided with a def ault fix ed IP address of 192.168.0.60. There- for ...
Instruction Manual 7 Windows XP and 2000 Locate, and doub le-click on the 1. Network Connections icon, within the Windows Control P anel. Right-click on 2. Local Area Connection (or Wireless network connection) Select 3. Properties . Under the General tab highlight Internet Protocol TCP/IP Click on the 4. Pr operties button. Click on the Radio b ut ...
8 Instruction Manual SV1107IPEXT Initial Conguration Open your web bro wser . Y ou will get a P age cannot be displa yed 1. error message, this is normal. In the Address line, type: 2. http:// 192.168.0.60 , then press Enter . When the cer tificate windows pop 3. up , accept them. When the below screen appears, log into the SV1107IPEXT : 4. Use ...
Instruction Manual 9 After logging in, click on the 5. Network icon (sho wn below) along the top of the window . Select 6. Set IP Address manuall y (A static IP Address is preferred). The actual address you use is dependent on y our network’ s address range: As an example: In the preliminary set up, the IP Address noted is 192.168.1.16, so the IP ...
Instruction Manual 10 For no w leav e the rest of the settings at their default values (the y will 8. be cov ered later). Click on Apply , then Logout. The SV1107IPEXT will reset. (It is 9. impor tant to log out so the SV1107IPEXT will close the connection). Please Note: Change your computer’ s IP address and Default Gate wa y bac k to the origin ...
Instruction Manual 11 Hardware Setup Installation T o install the SV1107IPEXT , ref er to the installation diagram on the f ollow- ing page: Use the Console cable pro vided to connect the SV1107IPEXT’ s 1. Console por t, to the local ke yboard, monitor and mouse, the y are color coded for identification. Use the KVM cable pro vided to connect th ...
Instruction Manual 12 Installation - Cont ’d 1 2 3 4 5 6 ...
Instruction Manual 13 (Optional) Mounting to a Cabinet/Rack If you wish to mount the SV1107IPEXT in a server/storage rac k/cabinet, using the included brac ket: ( 1 . Figure 1) Remov e the two scre ws closest to the rear panel of the SV1107IPEXT , on the base of the unit. ( 2 . Figure 2) Place the mounting brac ket on the base, aligning the circula ...
Instruction Manual 14 Normal Logon T o operate the SV1107IPEXT from an Internet browser , begin by logging in. Open your browser and specify the IP address (assigned in the pre- liminary set up) of the SV1107IPEXT in the browser’ s Address bar . A Security Aler t dialog box, similar to the one below , appears. 1. Accept the cer tificate. If a se ...
Instruction Manual 15 The SV1107IPEXT Main Screen appears: The Main Screen consists of Administration icons arranged horizontally across the top of the screen (see pg. 15), and Utility icons arranged verti- cally on the left side of the screen (described in table below). Utility Icons Apply: Sa ves the changes y ou make in the administr ation dialo ...
Instruction Manual 16 Administration The icons arranged v er tically on the left side of the screen (shown left) are linked to the administration utilities , which are used to configure the SV1107IPEXT . Y our ability to make configuration changes depends on the permissions associated with your login inf ormation. Once you login, the Gener al pan ...
Instruction Manual 17 Network The Network dialog is used to specify the SV1107IPEXT’ s network envi- ronment. Access P orts If a firew all is being used, the Administrator can specify (in the firew all set up) the por t numbers that it will allow . When connecting to the SV1107IPEXT , users must specify the por t number as par t of the IP Addre ...
Instruction Manual 18 IP Address The SV1107IPEXT can hav e its IP address assigned dynamically at boot- up (DHCP), or can be given a fix ed IP address. Please note: If you wish to access the SV1107IPEXT from the Internet, assign a static IP address as you will need to configure y our router to forw ard the port to the SV1107IPEXT , and an IP addr ...
Instruction Manual 19 the operability of the e-mail notification. An e-mail should be sent to the e-mail address specified in the T o: field Please Note: This will only notify you if the SV1107IPEXT changes its address on your local network, it will not notify y ou if your e xter nal ad- dress changes. Security The Security page is used to contr ...
Instruction Manual 20 Filtering T o enable IP and/or MA C filter ing, place a checkmark in the IP Filter Enable and/or MA C Filter Enable checkbox. There is a maxim um of 100 filters allowed f or each option. If the • include b utton is check ed, all the addresses within the filter range are allow ed access to the SV1107IPEXT . Addresses no ...
Instruction Manual 21 T o delete a filter , select it and click Remove . T o modify a filter , select it and click Edit . The Edit dialog bo x is similar to the Add dialog box. When it appears, simply delete the old address and replace it with the new one . User Station Filtering – MA C Addresses T o add a MA C address filter click Add . A dia ...
Instruction Manual 22 Enter the follo wing command: openssl req -x509 -nodes -days 365 -ne wke y rsa: 1024 -keyout m ycer t.pem -out mycert.pem In order to use a custom SSL cer tificate, the created PEM file must then be uploaded through the web interf ace. Click on the Br owse b utton, and locate the generated certificate file, then click on t ...
Instruction Manual 23 T o delete a user profile, select it from the names displa y ed in the User List panel, and click Remo ve . The user’ s name is remov ed from the User List panel. T o modify a user profile, first select it from the list in the upper panel, then change the information that appears in the User Info dialog bo x. The Re- set ...
Instruction Manual 24 Please Note: If a user is denied a permission, that per mission will not be visible on the Utility tool bar , when that user logs on. Customization This configuration page allows the Administr ator to set Timeout , Login Failure , and W orking mode parameters. An e xplanation of the Customi- zation parameters is giv en in the ...
Instruction Manual 25 Firmware As new v ersions of the SV1107IPEXT firmware become av ailable , they can be downloaded from our website . Check the website regularly to find the latest inf ormation and packages. T o upgrade the firmware, do the f ollowing: After downloading the ne w firmware file to your computer , open your 1. browser and log ...
Instruction Manual 26 After the upload completes, clic k the 4. Apply icon at the left side of the web page. Enable the 5. Reset on Exit checkbox on the Customization page . Re-click the 6. Apply icon at the left of the w eb page. Click the 7. Logout icon at the upper right of the web page to exit and reset the SV1107IPEXT . Using the SV1107IPEXT S ...
Instruction Manual 27 Open a web browser on the remote computer . 3. T ype in the IP Address you wrote do wn in step 6 of SV1107IPEXT 4. Initial configuration f or e xample http://192.168.1.60, then hit the enter key Y ou will be taken to the SV1107IPEXT Logon screen 5. Enter your user name and pass word in the spaces provided and click 6. on Logo ...
Instruction Manual 28 When a connection to the SV1107IPEXT has been established, a 2. screen similar to the one shown here will appear: After you clic k on the Switch b utton, the remote system appears on your monitor . Y ou can work on the remote system via the screen display ed on y our monitor , as if it were y our local system. Y ou can move th ...
Instruction Manual 29 Please Note: Due to network lag, there might be a delay bef ore your ke ystrokes • appear on the screen. Y ou may also hav e to wait a bit for the remote mouse to catch up to your local mouse bef ore y ou click. Due to net lag, or insufficient computing power on the local machine , • some images, especially motion i ...
Instruction Manual 30 Icon Function Exit from the Windows Client F rom left to right, these icons indicate the current Num Lock , Caps Loc k and Scroll Lock state , respectively . When the corresponding icon is illuminated, the function is active . When connected, toggle the LEDs to set the correct state Please Note: Y ou can mov e the control pane ...
Instruction Manual 31 T o customize a hotk ey combination: Highlight the Action, and then click 1. Start . K ey in the Function k eys (one at a time). The k ey names appear in the 2. Key field as you press them. When you ha ve finished k eying in your sequence, Clic k 3. Stop . Click 4. Set . Repeat for any other actions y ou wish to change. Clic ...
Instruction Manual 32 Action Explanation Substitute Ctrl key If your local computer captures Ctrl ke y combinations, pre venting them from being sent to the remote system, you can implement their effects on the remote system by specifying a function k ey to substitute for the Ctrl k ey . If you substitute the F11 k ey , for e xample, pressing [ F11 ...
Instruction Manual 33 Option Usage Screen P osition Adjust the horizontal and vertical position of the remote computer window b y clicking the Arrow buttons . Auto-Sync Click A uto-Sync to detect the v er tical and horizontal offset values of the remote screen and automatically synchronize it with the local screen. If the local and remote mouse poi ...
Instruction Manual 34 The Message Board The SV1107IPEXT suppor ts two user logins, (only one user has control at a given time), which can possib ly create access conflicts. T o alleviate this problem, a message board f eature has been provided, allo wing users to communicate with one other . Message board operation resembles that of an Internet ch ...
Instruction Manual 35 By default, messages are posted to all users . T o post a message to an • individual user , select the user’ s name before sending y our message. If a user’ s name is selected, and y ou want to post a message to all • users, select All Users prior to sending a message. If a user has disabled Chat, an icon is sho ...
Instruction Manual 36 Show / Hide (User List): When you hide the User List, the User List panel closes. The button is shado wed when the User List is open Exit: Click to close the message board Please Note: Only users who are currently logged on can see the Mes- sage Board - it is not visible on the local monitor . Virtual Media The SV1107IPEXT’ ...
Instruction Manual 37 F rom the remote computer click on the Vir tual Media icon in the Windows Client Control P anel, this opens the Vir tual Media Connection dialog box: Please Note: More than one USB mass storage de vice ma y be connect- ed and recognized, b ut only the unit selected can be accessed. Drop down the Ph ysical De vice list to selec ...
Instruction Manual 38 work, once your configuration has been pro ven, the Internet connection will be cov ered. T o connect from y our local network: Ensure the “remote” computer is connected to your network. 1. Ensure the SV1107IPEXT is connected to your local network and to 2. the local computer Star t the browser of your choice on the remot ...
Instruction Manual 39 The Jav a Applet T oolbar The Ja va Applet’ s toolbar provides utilities to help y ou control remote KVM operations. Please Note: The tool bar is hidden in the blank area at the bottom cen- ter of the screen, and appears when you mo ve the mouse pointer o ver the area. The T ool Bar Icons and their functions are explained in ...
Instruction Manual 40 Set Video Parameter s: Clicking on this b utton brings up the Video Settings dialog box: Please Note: W e recommend that you perf or m Auto sync immediately follo wing connection, to ensure proper mouse synchronization. Keypad Since some local input ke yboard combinations cannot be captured and sent to the SV1107IPEXT , the K ...
Instruction Manual 41 Mouse Synchronization At times, the local mouse mov ement may lose sync with the remote mouse mov ement. Y ou can tr y getting them back in sync with fast mouse synchronization by mo ving the mouse pointer down into the J av a Applet toolbar . If that does not help, run A uto sync (as discussed on the pre vious page). If Auto ...
Instruction Manual 42 When the front panel LEDs flash, disconnect the power adapter from 5. the SV1107IPEXT . Remov e the jumper cap from J9. 6. Close the housing and reconnect the SV1107IPEXT power adapter 7. and cables . After star ting back up , y ou can use the default Username and P ass 8. word to log in. Please Note: P erforming this procedu ...
Instruction Manual 43 If you ha ve assigned a static IP address to the SV1107IPEXT , this step 1. can be skipped. The SV1107IPEXT features IP Change Notification, which will automatically send an e-mail to your pref erred address, notifying y ou of the new IP Address . Fill out the form (contact your ISP if you are unsure of the information). Afte ...
Instruction Manual 44 If you are using A utomatic addressing, click on the drop down arrow labeled Computer Name and select the SV1107IPEXT by name . In the 6. P orts to Open [TCP] space, enter 9000 , 9002 (or the por t numbers you chose) and set the schedule . Activate P or t Forwarding b y placing an X in the box on the e xtreme left. Sav e your ...
Instruction Manual 45 T roubleshooting General Operation SV1107IPEXT is acting erratically: Press and hold the Reset button f or at least three seconds My Virtual Media device is set to “read only” under Windows Vista™ and cannot be made writable: Due to Windows Vista™ security features, no data can be written to a Vir tual Media device . U ...
Instruction Manual 46 When I log in, the bro wser generates a CA Root certificate is not trusted, or a Certificate Error response The cer tificate name is not found on Microsoft’ s list of T r usted Authorities. The cer tificate can be trusted. For mouse prob lems, see Ad ditional Mouse Synchr onization Proce- dures The Windows Client Windows ...
Instruction Manual 47 Mouse Synchronization Procedures If the mouse synchronization procedures mentioned in the manual f ail to resolve mouse pointer prob lems f or par ticular computers, try the follow- ing: Note: These procedures are to be performed on the computers attached to 1. the SV1107IPEXT por ts (local) - not on the computer you are using ...
Instruction Manual 48 Windows XP / Windows Server 2003 / Vista™ Set the mouse speed to the middle position, then disable Enhance P ointer Precision (Control P anel −> Pr inters and Other Hardware −> Mouse −> P ointer Options). Apply −> OK ...
Instruction Manual 49 T echnical Support StarT ech.com’ s lifetime technical support is an integr al par t of our commit- ment to pro vide industry-leading solutions. If y ou e ver need help with your product, visit www .star tech.com/suppor t and access our comprehensive selection of online tools, documentation, and downloads . Warranty Informat ...
StarT ech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a div erse IT and A/V customer base that spans man y channels, including gov ernment, education and industrial f acilities to name just a f ew . We off er an unmatched selection of computer parts, cab les, A/V products, KVM and Serv- er Management ...
StarTech.com SV1107IPEXTのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- SV1107IPEXTの取扱説明書
- StarTech.comの製品カード
- パンフレット
- またはStarTech.com SV1107IPEXTの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、StarTech.com SV1107IPEXTの取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、StarTech.com SV1107IPEXTの取り付け説明書、サービスマニュアル、簡易説明書、またはStarTech.com SV1107IPEXTのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、StarTech.com SV1107IPEXTの製品を使用するにあたって最も人気のある説明書を閲覧できます。
StarTech.com SV1107IPEXTデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがStarTech.com SV1107IPEXTを使用するのを助ける技術的文書のことです。説明書は通常、全てのStarTech.com SV1107IPEXTユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
StarTech.comの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. StarTech.com SV1107IPEXTの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははStarTech.com SV1107IPEXTの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。StarTech.com SV1107IPEXTに関してこのドキュメントで見つけることができる全てのヒントの目次
3. StarTech.com SV1107IPEXTデバイスの基本機能を使うにあたってのヒント。 StarTech.com SV1107IPEXTのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。StarTech.com SV1107IPEXTに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるStarTech.com SV1107IPEXTのメーカー/サービスへの連絡先に関する情報。
StarTech.com SV1107IPEXTについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもStarTech.com SV1107IPEXTの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがStarTech.com SV1107IPEXTで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。