-
AC International UPP - page 1
Pocket Programmer Model UPP UPB Pocket Programmer User Guide ...
-
AC International UPP - page 2
Pocket Programmer Model UPP - 2 - DESCRIPTION The Pocket Programmer (model UPP) provides many of the features of UPStart UPB configuration software in a portable hand held device. The Pocket Programmer comes with a handy carrying case and AC power cord that plugs into any standard receptacle allowing communication to installed UPB devices. The Pock ...
-
AC International UPP - page 3
Pocket Programmer Model UPP 3 INSTALLATION The Pocket Programmer is designed fo r indoor use. Simply plug the appropriate end of the provided AC cord into the top of the UPP, the other end into any 120-volt outlet anywhere in the house. Once the Pocket Programmer completes its start up procedure the top two (of six) selections of the main menu are ...
-
AC International UPP - page 4
Pocket Programmer Model UPP 4 FUNCTION: Toggles the backlight on the LCD display. LED: The diagnostic LED operates just as the LED on the Computer Interface Module. In Run CIM mode the Pocket Programmer exchanges UPB messages between the powerline and the connected computer or controller. The indicator on the UPP will glow AMBER when powered, flash ...
-
AC International UPP - page 5
Pocket Programmer Model UPP 5 Access Network is used on an installed UPB network. It is useful when viewing or editing devices. Devices can be added or deleted. Links may also be added or deleted. The same functions are available in UPStart under the Device, Link and Network menus. ...
-
AC International UPP - page 6
Pocket Programmer Model UPP 6 <MENU> <MENU> <MENU> Select Net ID=001 <ENTER> Select Net ID=001 Select Pswd=0 000 1 )Access Network 2)New Network 1 1 )Add Device 2)Edit Device 1 Select Net ID=002 <UP> To desired Network ID <UP> Select Net ID=001 Select Pswd=1 000 <UP> <RIGHT> Select Net ID=001 Select P ...
-
AC International UPP - page 7
Pocket Programmer Model UPP 7 Add Device is used to add installed UPB devices to the UPB network. If a device is not found: 1. Make sure there is only one device in set up mode. 2. Check the wiring to ensure the connections are proper and the wire nuts are on tight. 3. Check the phase coupler to ensure it is properly installed and operational. ...
-
AC International UPP - page 8
Pocket Programmer Model UPP - 8 - Edit Device is used to change the settings on a previously added device. For instance, the dimming can be disabled under the Options sub-menu. ...
-
AC International UPP - page 9
Pocket Programmer Model UPP 9 ...
-
AC International UPP - page 10
Pocket Programmer Model UPP 10 ...
-
AC International UPP - page 11
Pocket Programmer Model UPP 11 Edit Device Su b-Menu – Transmit Links 1)ID 2)Receive Links 1 <UP/DOWN> <UP/DOWN> <UP/DO WN> <UP/DO WN> <ENTER> <MENU> <Reading Device> 01)Link=241 S uper Toggler <MENU> <ENTER> <ENTER> <ENTER> <UP/DOWN> <MENU> 02)Link=--- Super Toggler 08 ...
-
AC International UPP - page 12
Pocket Programmer Model UPP 12 ...
-
AC International UPP - page 13
Pocket Programmer Model UPP 13 1)ID 2)Receive Links 1 <UP/DOWN> <UP/DOWN> <UP/DOW N> <UP/DOW N> <MENU> 3)Transmit Links 4)Options 4 2)Receive Links 3)Transmit Links 3 1)ID 2)Receive Links 2 4)Options 5)Advanced 5 1)Add Devi ce 2)Edit Devi ce 1 2)Xmit Atmpts : 3)Xmit 2 Rpeatr: 3 <ENTER> 1)Xmit Type : 2)Xmit Atmpts ...
-
AC International UPP - page 14
Pocket Programmer Model UPP 14 <MENU> <MENU> 1 )Add Device 2)Edit Device 1 Select DevID=001 1)ID 2)Receive Links View Device Select DevID=002 <UP> <UP> If device is no t found <ENTER> <ENTER> <ENTER> <MENU> Select DevID=001 <SAI UML> 1 <ENTER> 4)Options 5)Advanced 5 Err: Device Not Found E ...
-
AC International UPP - page 15
Pocket Programmer Model UPP 15 1 )Add Device 2)Edit Device 1 1)Add Device 2)Edit Device 2 2)Edit Device 3)View Device 3 3)View Device 4)Delete Device 4 <DOWN> <DOWN> <DOWN> Enter Setup Mo d e Add Link=001 <Link Added> Add Link=00 1 <ENTER> <ENTER> <UP/DOWN> To Select Device ID <MENU> <MENU> < ...
-
AC International UPP - page 16
Pocket Programmer Model UPP 16 . ...
-
AC International UPP - page 17
Pocket Programmer Model UPP 17 2)New Network 3)UPB Explorer 3 1)Access Network 2)New Network 1 1)Access Network 2)New Network 2 <UP/DOWN> <UP/DOWN> <ENTER> 1)Smart Transmit 2)Smart Receive 1 1)Smart Transmit 2)Smart Receive 2 2)Smart Receive 3)Expert Receive 3 3)Expert Receiv e 4)Expert Transmit 4 <UP/DOWN> <UP/DOWN> & ...
-
AC International UPP - page 18
Pocket Programmer Model UPP 18 Smart Receive is used to observe UPB transmissions. . ...
-
AC International UPP - page 19
Pocket Programmer Model UPP 19 . ...
-
AC International UPP - page 20
Pocket Programmer Model UPP 20 Simply Automat ed, Incorporat ed 5825 Avenida Encinas, Suite 101, Carls bad, CA 92008 USA Technical Supp ort: www.simply-automated.com or 800-630-9 234 452-0031-0001 Rev. A Revised: May 16, 2006 ...
AC International UPPについてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもAC International UPPの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAC International UPPで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。