Campbell Hausfeld WF2010の取扱説明書

36ページ 0.79 mb
ダウンロード

ページに移動 of 36

Summary
  • Campbell Hausfeld WF2010 - page 1

    Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. IN211702AV 1 ...

  • Campbell Hausfeld WF2010 - page 2

    2 Wire Feed Arc Welder Always keep a fire extinguisher accessible while performing arc welding operations. ● Before starting or servicing any electric arc welder, read and understand all instructions. Failure to follow safety precautions or instructions can cause equipment damage and/or serious personal injury or death. ● All installation, main ...

  • Campbell Hausfeld WF2010 - page 3

    LOCATION Selecting the proper location can significantly increase performance, reliability and life of the arc welder. ● For best results locate the welder in an environment that is clean and dry. ● Store flux core wire in a clean, dry location with low humidity to preserve the flux wire coating. ● The use of an extension cord is not recommen ...

  • Campbell Hausfeld WF2010 - page 4

    Flux Core Wir e Installation Welding power is applied to the output terminals, feed roll, work clamp, gun cable connection and welding wire even when the the gun switch is not activated. Do not touch these parts when the welding machine is on. NOTE: Before installing welding wire, be sure that the diameter of the welding wire matches the contact ti ...

  • Campbell Hausfeld WF2010 - page 5

    Metal Heat Thickness Setting 5 Model WF2010 If heating, welding, or cutting materials that are galvanized, zinc plated, lead, or cadmium plated refer to the General Safety Information Section for instructions. Extremely toxic fumes are created when these metals are heated. 4. Connect the work clamp to the work piece or workbench (if metal). Make su ...

  • Campbell Hausfeld WF2010 - page 6

    WIRE TYPE AND SIZE The correct choice of wire type involves a variety of factors, such as welding position, work piece material type, thickness, and condition of surface to be welded. The American Welding Society, AWS, has set up certain requirements for each type of wire. The AWS classification for self-shielding wire (Gasless process) is a multi ...

  • Campbell Hausfeld WF2010 - page 7

    Model WF2010 W elding Guidelines (Continued) Figure 10 - Multiple Weld Passes PUSH VS PULL TECHNIQUE The type and thickness of the work piece dictates which way to point the gun nozzle. For thin materials (18 gauge and up), the nozzle should point out in front of the weld puddle and push the puddle across the workpiece. For thicker steel, the nozzl ...

  • Campbell Hausfeld WF2010 - page 8

    8 Wire Feed Arc Welder T r oubleshooting Chart - W elder Symptom Possible Cause(s) Corrective Action 1. Duty cycle exceeded 2. Poor work clamp connection 3. Defective power switch 4. Blown breaker or fuse 1. Wrong size gun tip 2. Gun liner clogged or damaged 3. Gun tip clogged or damaged 4. Feed roller worn 5. Not enough tension Slag inside gun noz ...

  • Campbell Hausfeld WF2010 - page 9

    9 Model WF2010 Heat Selector Switch Thermal Breaker T1 T2 S2 6 5 2 4 1 432 1 L2(N) L1 S4 Max Min White Black Green Ground M Gun T rigger S4 - Thermal Breaker To r c h _ _ + + AC to DC Converter (-) T o Work Clamp (+) WF2010 Wiring Diagram Limited 5-3-1 W arranty 1. Duration: The manufacturer warrants that it will repair, at no charge for parts or l ...

  • Campbell Hausfeld WF2010 - page 10

    10 Wire Feed Arc Welder For Replacement Parts, call 1-800-746-5641 Address parts correspondence to: The Campbell Group Attn: Parts Department 100 Production Drive Harrison, Ohio 45030 Please provide following information: - Model number - Serial number (if any) - Part description and number as shown in parts list 1 Torch assembly and hose WC601200A ...

  • Campbell Hausfeld WF2010 - page 11

    11 Glossary of W elding T erms AC or Alternating Current - electric current that reverses direction periodically. Sixty cycle current travels in both directions sixty times per second. Arc Length - the distance from the end of the electrode to the point where the arc makes contact with the work surface. Base Metal - the material to be welded. Butt ...

  • Campbell Hausfeld WF2010 - page 12

    Notes 12 Wire Feed Arc Welder Model WF2010 www.chpower.com ...

  • Campbell Hausfeld WF2010 - page 13

    5. S é lecteur de chaleur - Sélecteur de puissance (Haut/Bas - "High/Low"). 6. Commande de r é glage de vitesse de fil infini - tourner au sens des aiguilles d’une montre pour augmenter la vitesse de fil et tourner au sens inverse des aiguilles d’une montre pour réduire la vitesse du fil. Danger indique: Manque de suivre cet avert ...

  • Campbell Hausfeld WF2010 - page 14

    14 Fr Soudeur À L’Arc Alimenté En Fil avertissement peut causer la perte de vie ou blessures graves. Attention indique: Manque de suivre cet avertissement peut causer des blessures (petites ou moyennes) ou dommage matériel. REMARQUE : Remarque indique: Information additionnel concernant le produit ou son utilisation. Toujours avoir un extincte ...

  • Campbell Hausfeld WF2010 - page 15

    Safe Handling of Compressed Gases in Cylinders (Manipulation S û r des Gaz Comprim é s en Cylindres) CGA Pamphlet P-1, du Compressed Gas Association, 1235 Jefferson Davis Highway, Suite 501, Arlington, VA 22202 Cutting And Welding Processes (Proc é d é s de Coupage et de Soudage) Norme NFPA 51B, du National Fire Protection Association, Batterym ...

  • Campbell Hausfeld WF2010 - page 16

    3. Desserrer la vis de tension sur le dispositif d’alimentation afin de permettre l’avancement initial à la main du fil dans la chemise du pistolet. 4. Installer la bobine sur la broche afin que le fil puisse sortir de la bobine au bout le plus près du tube de guidage d’avance. Ne pas couper le fil tout de suite . Installer la bague d’esp ...

  • Campbell Hausfeld WF2010 - page 17

    17 Fr Modèle WF2010 vêtements de soudage protecteurs y compris: protection oculaire avec lentille correcte, vêtements incombustibles, gants de soudeur en cuir, et protection complète pour les pieds. Le fil de soudage est toujors sous tension lorsque le poste de soudage est en marche - que le pistolet soit actionné ou non. Pour le chauf fage, s ...

  • Campbell Hausfeld WF2010 - page 18

    18 Fr Soudeur À L’Arc Alimenté En Fil que le soudeur se pratique sur des morceaux de métal afin d’ajuster les réglages, et comparer les soudures avec la Figure 12. TYPE ET TAILLE DE FILS Le choix correct du fil comprend une variété de facteurs telles que la position de soudage, le matériel de l’objet de travail, l’épaisseur et la co ...

  • Campbell Hausfeld WF2010 - page 19

    19 Fr Modèle WF2010 TECHNIQUE POUSSER VS TIRER Le type et l’épaisseur de la pièce de travail agissent sur la direction de la buse du pistolet. Pour des matériaux minces, (taille 18 et plus), la buse devrait être dirigée en avant de la flaque de soudure et devrait pousser la flaque à travers de l’objet de travail. Pour de l’acier épais ...

  • Campbell Hausfeld WF2010 - page 20

    20 Fr Soudeur À L’Arc Alimenté En Fil Guide de d é pannage - Soudeur Sympt ô me Cause(s) Possible(s) Mesure Corrective 1. Facteur d’utilisation dépassé 2. Raccord au collier de mise à la terre insuffisant 3. Interrupteur défectueux 4. Disjoncteur ou fusible sauté 1. Bout du pistolet de taille incorrecte 2. Chemise du pistolet obstruée ...

  • Campbell Hausfeld WF2010 - page 21

    Heat Selector Switch Thermal Breaker T1 T2 S2 6 5 2 4 1 432 1 L2(N) L1 S4 Max Min White Black Green Ground M Gun T rigger S4 - Thermal Breaker To r c h _ _ + + AC to DC Converter (-) T o Work Clamp (+) 21 Fr Modèle WF2010 Sch é ma d'installation de fils WF2010 Garantie Limit é e 5-3-1 1. Dur é e: Le fabriquant garantie la réparation, sans ...

  • Campbell Hausfeld WF2010 - page 22

    22 Fr Pour pièces de r echange, composer 1-800-746-5641 1 Assemblage de chalumeau et tuyau WC601200AJ 1 2 Corps du chalumeau, avant et arrière WC600401AV 1 3 Raccord de chemise WC600403AV 1 4 Buse WT502100AJ 1 5 Détente du pistolet WC600402AV 1 6 Molette de torche WC600404AV 1 7 Collier de mise à la terre (cordon non-compris) WC100000AV 1 8 Câ ...

  • Campbell Hausfeld WF2010 - page 23

    23 Fr Lexique de T ermes de Soudage CA ou Courant Alternatif - courant électrique qui change de direction périodiquement. Le courant à soixante cycles voyage dans les deux directions soixante fois par seconde. Longueur de L ’ Arc - La distance du bout de l’électrode jusqu’au point où l’arc contacte la surface de travail. M é tal Commu ...

  • Campbell Hausfeld WF2010 - page 24

    Notes 24 Fr Soudeur À L’Arc Alimenté En Fil Modèle WF2010 ...

  • Campbell Hausfeld WF2010 - page 25

    Sírvase leer y guardar estas instrucciones.Lea con cuidado antes de tratar de armar, instalar, manejar o darle servicio al producto descrito en este manual. Protéjase Ud. y a los demás observando todas las reglas de seguridad. El no seguir las instrucciones podría resultar en heridas y/o daños a su propiedad.Guarde este manual como referencia. ...

  • Campbell Hausfeld WF2010 - page 26

    26 Sp NOTA: Ésto le indica cualquier información adicional sobre el producto o el uso adecuado del mismo. Siempre mantenga un extingidor de incendio accesible cuando esté soldando con arcos eléctricos. ● Antes de encender o darle servicio a las soldadoras eléctricas de arco, debe leer y comprender todas las instrucciones. Si no sigue las med ...

  • Campbell Hausfeld WF2010 - page 27

    Safe Handling of Compressed Gases in Cylinders CGA Pamphlet P-1, — Compressed Gas Association, 1235 Jefferson Davis Highway, Suite 501, Arlington, VA 22202 Cutting And Welding Processes NFPA Standard 51B, — National Fire Protection Association, Batterymarch Park, Quincy, MA 02269 Safe Practices For Occupational And Educational Eye And Face Prot ...

  • Campbell Hausfeld WF2010 - page 28

    2. Para desactivarle el seguro al carre- te, oprímalo y gírelo en sentido contrario a las agujas del reloj 1/4 . Ahora puede sacarle la perilla, el resorte y el separador. 3. Afloje el tornillo que le suministra tensión al alambre en el mecanismo. Ésto le permite meter con la mano el alambre en la pistola. 4. Coloque el carrete de alambre en el ...

  • Campbell Hausfeld WF2010 - page 29

    29 Sp Modelo WF2010 soldadores de la oscuridad adecuada según las especificaciones dadas a continuación, ropa resistente al fuego, guantes de cuero para soldar y protección para los pies. El alambre para soldadura está cargado siempre cuando la soldadora está encendida - esté el gatillo oprimido o no. Si piensa calentar soldar o cortar materi ...

  • Campbell Hausfeld WF2010 - page 30

    30 Sp Soldadora Con Arco Con Alambre Continuo Instrucciones para Soldar General Esta línea de soldadoras utiliza el proceso de soldadura por arco eléctrico con fundente (sin gas). La soldadura se debe proteger contra contaminantes en el aire mientras se esté derritiendo. Pa- ra soldar con un alambre con fundente revestido se utiliza un alambre c ...

  • Campbell Hausfeld WF2010 - page 31

    31 Sp Modelo WF2010 Figura 9 - Pasos Cubierta Relleno Raíz Instrucciones para Soldar (Continuaci ó n) TECNICA USADA PARA SOLDAR El tipo de material y el grosor de la pieza que va a soldar determinan la dirección en que debe colocar la boquilla de la pistola. Para soldar materiales delgados (de calibre 18 o mayores) debe colocar la boquilla en fr ...

  • Campbell Hausfeld WF2010 - page 32

    32 Sp DIAGNOSTICO Diag ó stico de A ver í as-Soldadora Problema Posible(s) Causa(s) Acci ó n a Tomar 1. Excedio el ciclo de trabajo 2. La pinza está mal conectada 3. El interruptor está dañado 4. El cortacircuito se activó o el fusible está quemado 1. La boquilla de la pistola es de un tamaño incorrecto 2. El forro de la pistola está obst ...

  • Campbell Hausfeld WF2010 - page 33

    1. Duraci ó n: El fabricante garantiza que reparará, sin costo alguno por repuestos o mano de obra la soldadora o la pistola o los cables que estén dañados bien en material o mano de obre, durante los siguientes periodos después de la compra original: Por 5 años: El transformador y rectificador de la soldadora Por 3 años: Toda la soldadora ( ...

  • Campbell Hausfeld WF2010 - page 34

    1 Ensamblaje del soplete y manguera WC601200AJ 1 2 Cuerpo del soplete (piezas posterior y delantera) WC600401AV 1 3 Accesorio del forro WC600403AV 1 4 Boquilla WT502100AJ 1 5 Interruptor del gatillo WC600402AV 1 6 Tuerca de torsión del soplete WC600404AV 1 7 Pinza (no incluye el cordón) WC100000AV 1 8 Cable para soldar 8 AWG (6 pies, 1,83 metros) ...

  • Campbell Hausfeld WF2010 - page 35

    35 Sp Glosario de terminolog í a usada por soldador es CA o Corriente Alterna - corriente eléctrica que cambia de dirección periódicamente. Corriente de 60 ciclos se desplaza en ambas direcciones 60 veces por segundo. Longitud del Arco - la distancia entre el extremo del electrodo y el punto de contacto con la superficie de trabajo. Metal B á ...

  • Campbell Hausfeld WF2010 - page 36

    Notas Soldadora Con Arco Con Alambre Continuo Modelo WF2010 ...

メーカー Campbell Hausfeld カテゴリー Welder

Campbell Hausfeld WF2010のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- WF2010の取扱説明書
- Campbell Hausfeldの製品カード
- パンフレット
- またはCampbell Hausfeld WF2010の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Campbell Hausfeld WF2010の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Campbell Hausfeld WF2010の取り付け説明書、サービスマニュアル、簡易説明書、またはCampbell Hausfeld WF2010のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Campbell Hausfeld WF2010の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Campbell Hausfeld WF2010デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCampbell Hausfeld WF2010を使用するのを助ける技術的文書のことです。説明書は通常、全てのCampbell Hausfeld WF2010ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Campbell Hausfeldの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Campbell Hausfeld WF2010の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCampbell Hausfeld WF2010の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Campbell Hausfeld WF2010に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Campbell Hausfeld WF2010デバイスの基本機能を使うにあたってのヒント。 Campbell Hausfeld WF2010のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Campbell Hausfeld WF2010に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCampbell Hausfeld WF2010のメーカー/サービスへの連絡先に関する情報。

Campbell Hausfeld WF2010についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCampbell Hausfeld WF2010の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCampbell Hausfeld WF2010で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)