-
Sennheiser EK 2000 IEM - page 1
Instruction manual E K 2 0 0 0 I E M C M Y CM MY CY CMY K ...
-
Sennheiser EK 2000 IEM - page 2
1 Contents Important safety instru ctions ......................................... ................................. 2 The EK 2000 IEM diversity receiver ............................................ ..................... 4 Areas of application ....................................................... ................................. 4 The frequency ...
-
Sennheiser EK 2000 IEM - page 3
2 Important safety instructions Important safety instructions • Read this instruction manual. • Keep thi s instruction man ual. Always inc lude this instruc tion manual when passing the product on to third parties. • Heed all wa rnings and f ollow all in structions in this in struction manual . • Use only a cloth for clea ning the prod uct. ...
-
Sennheiser EK 2000 IEM - page 4
3 Important safety instructions Intende d use Intended use of the EK 2000 IEM diversity receiver includes: • having read these instructions especially th e chapter “Important safety instructions”, • using the product within the oper ating conditions and limitations described in this instruction manual. “Improper use” means us ing the pr ...
-
Sennheiser EK 2000 IEM - page 5
4 The EK 2000 IEM diversity receiver The EK 2000 IEM diversity receiver This diversity receiver is part of the 2000 series. With this series, Sennheiser offers high -quality state-of-the-art RF transm ission systems with a high level of operational reli ability and ease of use. T ransmitters and receivers are designed for m onitoring applications a ...
-
Sennheiser EK 2000 IEM - page 6
5 The EK 2000 IEM diversity receiver These transmitters are available in th e same UHF frequency ranges and are equipped with the same frequency bank system with factory-preset frequencies. An ad vantage of the factory-preset frequencies is that • a transmission system is ready for immediate use af ter switc h-on, • several transmission systems ...
-
Sennheiser EK 2000 IEM - page 7
6 Deliver y include s The frequency banks “ U1 ” to “ U6 ” allow you to freely select and store receiving freque ncies. It might be that these rece iving frequencies are not intermodulation-free (see page 28). Delivery includes The packag ing contains the foll owing items: 1 EK 2000 IEM diversity receiver 1 pair of IE 4 earph ones 1 instruc ...
-
Sennheiser EK 2000 IEM - page 8
7 Product overview Product overview Overview of the EK 2000 IEM diversity receiver 쐃 On/off/vol ume control 쐇 Headphone output ( PHONES ), 3.5 mm stereo jack socket, lockable (the ground c ontact is us ed by antenna II) 쐋 Antenna I 쐏 Operation and battery status indicator, red LED (lit = ON , flashing = LOW BATT ) 쐄 RF signal indication, ...
-
Sennheiser EK 2000 IEM - page 9
8 Product overview Overview of the displays After switch-on, the diversity receiver d isplays the “ Frequency/Name ” standard display. For further illustra tions and examples of the different standard displays, refer to page 15. The display backlighting is automatically reduced af ter approx. 20 seconds. Display Meaning 햲 RF level “ RF ” ...
-
Sennheiser EK 2000 IEM - page 10
9 Product overview 햷 Battery status Charge status: approx. 100% approx. 70% approx. 30% charge status is critic al, the red LOW BATT LED 쐏 is flashing : 햸 Muting function “ MUTE ” “ Mute ” is only displayed on the “ Frequency/ Name ” standard display (see page 15) • when the transmitter’s RF signal is deactivated or • when t ...
-
Sennheiser EK 2000 IEM - page 11
10 Putting the diversity receiver into operation Putting the diversity receiver into operation Inserting the batteries/accupack For powering the diversity receiver, you can either use two 1.5 V AA size batteries or the recha rgeable Sennheiser BA 2015 accupa ck (see “Accesso- ries” on page 33). 왘 Open the battery compartment by pushing the tw ...
-
Sennheiser EK 2000 IEM - page 12
11 Putting the diversity receiver into operation Connecting the earphones 왘 Connect the earphones to the socket 쐇 . Attaching the diversity receiver to clothing You can use the belt cli p 씊 to attach the diversity receiver to clothing (e.g. belt, waistband). The belt clip is detachable so that yo u can also attach th e diversity receiver with ...
-
Sennheiser EK 2000 IEM - page 13
12 Putting the diversity receiver into operation T o detach the belt clip: 왘 Lif t one side of the belt clip as shown. 왘 Press down the belt clip at one fixing po int and pull it out of the receiver housing. 왘 Repeat for the oth er side. ...
-
Sennheiser EK 2000 IEM - page 14
13 Using the diversity receiver Using the diversity receiver T o establish a transmission link, proceed as follows: 1. Switch the diversity receiver on (see next section). 2. Switch a transmitter on ( see the instruction manual of the trans- mitter ). The transmis sion link is established and the receiver’s RF level displ ay “ RF ” 햲 reacts ...
-
Sennheiser EK 2000 IEM - page 15
14 Using the diversity receiver To a d j u s t t h e volume : 왘 T urn the volume control 쐃 . Deactivating the lock mode temporarily You can activate or deactivate the automatic lock mode via the “ Auto Lock ” menu item (see page 24). If the lock mode is activated, you have to temporarily deactivate it in order to be able to operate the rece ...
-
Sennheiser EK 2000 IEM - page 16
15 Using the diversity receiver Selecting a standard display For more detailed information, refer to the chapter “Overview of the displays” on page 8. 왘 Press the ESC b utton to select a standard display. In stereo mode (see page 23), you can alte rnatively press the rocker button. Contents of the dis play Selectable standard display “ Freq ...
-
Sennheiser EK 2000 IEM - page 17
16 Using the operating menu Using the operating menu A special feature of the Sennheiser 2000 series is the consistent, intuitive menu structure of transmitters and re ceivers. As a result, adjus tments to the settings can be made quickly – even in stressful situa tions, for example on stage or during a live show or presentation. The buttons Over ...
-
Sennheiser EK 2000 IEM - page 18
17 Using the operating menu Display Fun ction of the menu item Page Main menu “Menu” Squelch Adjusts the squelch threshold 20 Easy Setup Scans for unused fr equency pre sets, rel eases and selects fre quency presets 21 Frequency Preset Sets the frequency bank and the channel 21 Name Enters a freely selectable name 22 Balance Ad justs the balanc ...
-
Sennheiser EK 2000 IEM - page 19
18 Using the operating menu W orking with the operating menu By way of example of the “ Frequency Preset ” menu, this section de scribes how to use the operating menu. Changing from a standard display to the operating menu Selecting a me nu item Changing and storing settings If the lock mode is activated, you have to deactivate it In order to b ...
-
Sennheiser EK 2000 IEM - page 20
19 Using the operating menu Canceling an entry T o subsequently return to the last edited menu item: Exiting a menu item T o return to the next higher menu level: T o directly return to th e current standard display: 왘 Press the ESC button to cancel the entry. The current standard display appears on the display p anel. 왘 Press the SET button re ...
-
Sennheiser EK 2000 IEM - page 21
20 Adjusting settings via the operating menu Adjusting settings via the operating menu The main menu “ Men u ” Adjusting the squelch threshold – “Squelch” Adjustment range: 5 to 25 dB μ V, adjustable in 2-dB steps, can be switched off The squelch eliminates annoying no ise when the transmitter is switched off or when there is n o longer ...
-
Sennheiser EK 2000 IEM - page 22
21 Adjusting settings via the operating menu If you have accidentally switched off the squ elch: 왘 Press the UP rocker b utton to switch the squelch on. Scanning for, releasing and selecting frequency presets – “Easy Setup” Selecting the frequency ba nk and the channel – “Frequency Preset” Display Squelch is ... ... switched on. The d ...
-
Sennheiser EK 2000 IEM - page 23
22 Adjusting settings via the operating menu Overview of the frequ ency banks a nd channels: Entering a name – “Name” Via the “ Name ” menu item, you can ente r a freely selectable name (e.g. the name of the performer) for the rece iver. The name is displayed on the “ Frequency/ Name ” standard di splay (see page 15). The name can con ...
-
Sennheiser EK 2000 IEM - page 24
23 Adjusting settings via the operating menu You can adjust the balance in 31 steps . In Focus mode (see ne xt section) and when one of the standard displays is shown, you can also use the rocker button to adjust the balance. The mode of operation of th e balance setting depen ds on the se lected audio mode (see next section). Switching between “ ...
-
Sennheiser EK 2000 IEM - page 25
24 Adjusting settings via the operating menu Activating/deactivating the au tomatic lock mode – “Auto Lock” The lock mode pr events that th e balance is accid entally adjust ed when the receiver is in Focus mode. In additi on, the lock mode prevents that the diversity receiver is accidentall y switched off or programed during ope ra- tion. Th ...
-
Sennheiser EK 2000 IEM - page 26
25 Adjusting settings via the operating menu Selecting a channel and assigning this channel a frequency It is vital to observe the notes on frequency selection on page 28. 왘 Press the rocker button to se t the MHz section of the frequency. 왘 Press the SET button to confirm the MHz se c tion of the frequency. The kHz section of the frequency i s ...
-
Sennheiser EK 2000 IEM - page 27
26 Adjusting settings via the operating menu 왘 Set the desired fre quency (MHz and kHz section) as described in the previous chap ter. Activating/deactivating the pilot tone evaluation – “Pilot T one” The pilot tone encodes the stereo sig nal of the transmitter and supports the diversity receiver ’s squelch functi on, thus protecting agai ...
-
Sennheiser EK 2000 IEM - page 28
27 Adjusting settings via the operating menu You c an adjust the limiter in 6-dB steps from –18 dB to –6 dB or switch it off (OFF). Adjusting the contrast of the display panel – “LCD Contrast ” You can adjust the contrast of the display pan el in 16 steps. Resetting the settings made in the operating menu – “Reset” When resetting th ...
-
Sennheiser EK 2000 IEM - page 29
28 Synchronizing a transmitter with the diversity receiver Synchronizing a tran smitter with the diversity receiver Setting the transmitters to intermodulation-free channels ( Easy Setup Sync ) Upon delivery, the SR 2000 IEM or SR 2050 IEM transmitter and the diver- sity receiver are synchronized with each other. If, howev er, you cannot establish ...
-
Sennheiser EK 2000 IEM - page 30
29 Synchronizing a transmitter with the diversity receiver 왘 Start the Easy Setup Sync function by placing the infra-red interface o f this diversity rece iver in front of th e infra-red interfaces of all transmit- ters, one af ter the other. The diversity receiver transfers an unused channel from the selected frequency bank to the first transmit ...
-
Sennheiser EK 2000 IEM - page 31
30 Cleaning the dive rsity receiver Using freely selectable receiving frequencies You can also freely select the re ceiving frequen cies and store these frequencies in the fr equency banks “ U1 ” to “ U6 ”. 왘 Set each diversity receiver to the s ame frequency bank (“ U1 ” to “ U6 ”). 왘 On one o f the rece ivers, se lect a ch ann ...
-
Sennheiser EK 2000 IEM - page 32
31 Recommendations and tips Recommendations and tips ... for the d iversity r eceiver • Make sure that t he antenna and the earphones cable do not cross. • For best results, make sure that th e transmitter sensitivity is correctly adjusted. ... for opt imum recep tion • T ransmission range de pends to a la rg e extent on location and can vary ...
-
Sennheiser EK 2000 IEM - page 33
32 If a problem occurs ... If a problem occurs ... Problem Possible cause Possible solution Diversity receiver cannot be operated, “ Locked ” appears on the display panel Lock mode is activated Deactivate the lock mode (see page 14). No operation indication Batteries are flat or accupack i s flat Replace the batteries or recharge the accupack ( ...
-
Sennheiser EK 2000 IEM - page 34
33 Accessori es If a prob lem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser partner for assistance. T o find a Sennheiser partner in your country, search at www.sennheiser.com under “Servi ce & Support”. Accessories The following EK 2000 IEM ...
-
Sennheiser EK 2000 IEM - page 35
34 Specifications Specifications RF characteristics AF characteristics Modulation wideband FM Frequency ranges 516–558, 558–626, 626–698, 718–790, 790–865 MHz (Aw to Dw, Gw, see page 5) Receiving frequencies up to 3,0 00 receiving frequencies , tuneable in steps of 25 kHz 20 frequenc y banks, each with up to 32 factory-preset channels 6 f ...
-
Sennheiser EK 2000 IEM - page 36
35 Specifications Overall device In compliance with Approved by Connector assignment Temperature range – 10°C to + 55°C Power supply 2 AA size batteries, 1.5 V or BA 2015 accupack Nominal voltage 2.4 V Power consumption: • at nominal voltage • with switched-off rece iver approx. 140 mA ≤ 25 μ A Operating time approx. 4 to 6 hrs (dependin ...
-
Sennheiser EK 2000 IEM - page 37
36 Manufact urer Declarat ions Manufacturer Declarations W arranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product . For the current warranty conditions , please visit our web site at www.sennheiser.com or contact your Sennheiser partner. In compliance with th e following requirements • RoHS Directive (2002/9 ...
-
Sennheiser EK 2000 IEM - page 38
37 Manufacturer Declarations Statements regardin g FCC and Industry Canada T h i s d e v i c e c o m p l i e s w i t h P a r t 1 5 o f t h e F C C R u l e s a n d w i t h R S S - 2 1 0 o f Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful in terference, and (2) this device must accept any i ...
-
Sennheiser EK 2000 IEM - page 39
38 Index Index Accessories 33 Accupack charging 10 inserting 10 Advanced Menu (extended menu) overview 17 settings 24 Auto Lock (activating/deactivating the lock mode) 24 B Balance (adjusting th e balance) 22 Batteries battery status 9 inserting 10 Buttons ESC button 7 function of the ~ 16 SET button 7 UP/DOWN button 7 C Channel assigning a frequen ...
-
Sennheiser EK 2000 IEM - page 40
39 Index Name (entering a name) 22 O Operating menu overview 16 settings 20 using 18 P Pilot Tone (activating /deactivating the pilot tone evaluation) 26 R Receiver adjusting the volume 13 cleaning 30 switching off 1 3 switching on 13 Reset (resetting th e settings made in the operating menu) 27 RF signal indication 7 S Software Revision (displayin ...
-
Sennheiser EK 2000 IEM - page 41
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 W edemark, Germany www.sennheiser.com Printed in Germany Publ. 01/09 529678/A01 C M Y CM MY CY CMY K ...
Sennheiser EK 2000 IEMについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもSennheiser EK 2000 IEMの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSennheiser EK 2000 IEMで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。