Dynaudio XEO 4の取扱説明書

32ページ 関係なし
ダウンロード

ページに移動 of 32

Summary
  • Dynaudio XEO 4 - page 1

    Owner’ s Manual Xeo English ...

  • Dynaudio XEO 4 - page 2

    2 Dynaudio All Apple products are trademarks of Apple Inc. All Sony products are trademarks of Sony Electronics Inc. All Sonos products are trademarks of Sonos Inc. Logitech Squeezebox is a trademark of Logitech Inc. An update to this manual may be necessary due to product improvements and new functions. The latest version of this manual can be fou ...

  • Dynaudio XEO 4 - page 3

    3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer‘s instructions. 8. Do not install near any heat sour ...

  • Dynaudio XEO 4 - page 4

    4 Dynaudio 14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way , such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally , or has been droppe ...

  • Dynaudio XEO 4 - page 5

    5 Safety information 7 Xeo loudspeakers 7 Power supply unit for Xeo Hub, Extender , and Link 7 Scope of delivery 8 Xeo loudspeakers (Xeo 4 or Xeo 6) 8 Xeo Hub 9 Xeo Extender 10 Xeo Link 10 Unpacking 1 1 Packaging material 1 1 Disposal 1 1 The Xeo system 12 Components 12 Combination examples 13 Remote control 14 Control elements 14 Xeo Hub 14 Displa ...

  • Dynaudio XEO 4 - page 6

    6 Dynaudio Thank you for choosing Dynaudio Xeo. Xeo combines the latest wireless technology with impressive sound quality and makes listening to music truly comfortable and easy . The next few pages contain important information on connecting the system and its operation to ensure perfect function and the best-possible sound quality . We hope you h ...

  • Dynaudio XEO 4 - page 7

    7 Safety information Xeo loudspeakers W ARNING Dangerous electrical voltage If the loudspeakers are connected to the mains voltage, a dangerous electrical voltage is present inside the speakers. ► Never open the loudspeaker housing. ► Do not operate defective loudspeakers and disconnect defective loudspeakers from the mains voltage. Please cont ...

  • Dynaudio XEO 4 - page 8

    8 Dynaudio Scope of delivery Xeo loudspeakers (Xeo 4 or Xeo 6)  2 Xeo loudspeakers (Xeo 4 or Xeo 6)  2 Xeo loudspeaker cloth covers  1 Xeo remote control  2 Xeo loudspeaker power cables (country-specic version) 1 Xeo rst time setup manual (quick guide for installation, not shown)    ...

  • Dynaudio XEO 4 - page 9

    9 Xeo Hub  1 Xeo Hub  1 Xeo power supply unit with micro USB cable (country-specic version)  1 stereo analog cable (jack 3.5 mm – 3.5 mm)  1 stereo analog cable (RCA – RCA)  1 optical digital cable (T oslink – T oslink)  1 USB cable (USB – mini USB) 1 Xeo rst time setup manual (quick guide for installation, not shown ...

  • Dynaudio XEO 4 - page 10

    10 Dynaudio Xeo Extender  1 Xeo Extender  1 Xeo power supply unit with micro USB cable (country-specic version) 1 Xeo rst time setup manual (quick guide for installation, not shown) Xeo Link  1 Xeo Link  1 Xeo power supply unit with micro USB cable (country-specic version)  1 stereo analog cable (RCA – RCA)  1 optical d ...

  • Dynaudio XEO 4 - page 11

    11 Unpacking After unpacking, make sure the system is complete and check the device and all accessories for transport damage. T ransport damage may be expected if the packaging is already severely harmed. Do not attempt to commission a damaged device. If the contents are incomplete or damaged, please contact your Dynaudio Xeo distributor . Distribu ...

  • Dynaudio XEO 4 - page 12

    12 Dynaudio The Xeo system Xeo consists of several high-quality components that are optimally matched. When combined, they can fulll the most demanding requirements for a wireless multi-room and multi-source system. NOTE: This manual describes all of the available Xeo components. It is possible that only a few of the descriptions are relevant to ...

  • Dynaudio XEO 4 - page 13

    13 Combination examples Below you will nd several examples of Xeo component combinations. The high level of exibility in the Xeo system enables even more variants. Ask your Dynaudio distributor to nd the perfect solution for your needs. Standard: Hub + loudspeaker Hub For a larger range: Hub + Extender + loudspeaker Hub Extender For additi ...

  • Dynaudio XEO 4 - page 14

    14 Dynaudio Connection and operation This section describes the connections and control elements for the Xeo components. Please contact your Dynaudio Xeo distributor if you have any problems with connection and start-up. Distributor addresses can be found in the Internet at www .dynaudio.com. Remote control The Xeo remote control can be used to tur ...

  • Dynaudio XEO 4 - page 15

    15 Display elements LED Connection status LED illuminated in blue: Connection established (to a loudspeaker , Extender , or Link). LED ashes: The Hub is searching for a connection. LED illuminated in red: The Hub could not establish a connection. Inputs 1 Aux in Input for cable with stereo jack (3.5 mm stereo) Connect devices here that have an o ...

  • Dynaudio XEO 4 - page 16

    16 Dynaudio Other connections and control elements Ethernet Network connection Intended for future functions. Id T ransmission channel If you assign an ID, you can select the desired Hub from several Hubs using the remote control. In addition, each ID has its own transmission channel: A = 2.4 GHz, B = 5.2 GHz, C = 5.8 GHz. If the transmission quali ...

  • Dynaudio XEO 4 - page 17

    17 Y our signal source Signal source output Xeo Hub input Cable (source – Hub) Notes Astell&Kern Headphones 1: Aux in Jack 3.5 mm – 3.5 mm – Optical 2: Optical In T oslink – T oslink PonoPlayer Jack 1: Aux in Jack 3.5 mm – 3.5 mm – Docking station, network client, Sonos, Logitech, Squeezebox, ... Line out 1: Line in RCA – RCA * If ...

  • Dynaudio XEO 4 - page 18

    18 Dynaudio Xeo loudspeakers The active Xeo 4 and Xeo 6 loudspeakers have an integrated amplier and can be controlled with the Xeo remote control. The loudspeakers can be switched between stereo and mono mode using a switch on the rear . Connections and control elements Speaker position Sound adjustment (depending on the position of the loudspea ...

  • Dynaudio XEO 4 - page 19

    19 Division into audio zones The Xeo loudspeakers (as well as Xeo Link) can be assigned to an audio zone using the Zone selector switch. All components assigned to a zone can be operated together via the remote control. Red Green Blue Speaker Id Red Green Blue Zone Speaker Id Red Green Blue Zone Speaker Id Red Green Blue Zone ...

  • Dynaudio XEO 4 - page 20

    20 Dynaudio Cloth cover The cloth cover has been designed so it does not inuence the sound dispersion of the loudspeaker . The cloth cover is attached to the housing with magnets and may be removed if needed. Setting up CAUTION Spikes with pointed ends Xeo 6 oor-standing speakers are delivered with spikes for permanent installation on the  ...

  • Dynaudio XEO 4 - page 21

    21 Switching on/standby mode T o switch the loudspeaker on from standby mode: ► Point the remote control at the loudspeaker and press the ON button or press on the interface display . ▼ The loudspeaker will automatically search for an active Hub and an audio signal. If found, the signal will be output (autoplay function). If there is no input s ...

  • Dynaudio XEO 4 - page 22

    22 Dynaudio Interface display The display on the housing indicates the operational state of the loudspeakers and system using LEDs with various colors and ash functions. Buttons on the display On/off switch Pressing this button for longer than 2 seconds will switch the loudspeaker on or to standby mode. Input selection A brief press of this butt ...

  • Dynaudio XEO 4 - page 23

    23 Switch-off process The LEDs go out one by one. In the nal state, only one LED is illuminated dimly in red. The loudspeaker is being switched off. Select a Hub One of the three LEDs ashes. LED 1 = Hub A LED 2 = Hub B LED 3 = Hub C Select an input One of the four LEDs ashes. LED 1 = INPUT 1 LED 2 = INPUT 2 LED 3 = INPUT 3 LED 4 = INPUT 4 ...

  • Dynaudio XEO 4 - page 24

    24 Dynaudio Xeo Extender The Xeo Extender extends the reception range of the Xeo Hub. As a result, Xeo loudspeakers or other Xeo components can be operated further away from the Hub. Connections and control elements Front Left LED Reception status LED illuminated in blue: There is a connection to a Hub. LED ashing in red: No connection to a Hub ...

  • Dynaudio XEO 4 - page 25

    25 Connecting and establishing a link Hub Extender 1. Connect the Power socket to the voltage supply via the Xeo power supply unit. Do not use a different power supply unit! 2. Select the same ID on the Hub and Extender for the Hub Id In . E.g. Hub: Id = B → Extender: Hub Id In = B . 3. Select any (other) ID on the Extender for the Extender Id Ou ...

  • Dynaudio XEO 4 - page 26

    26 Dynaudio Xeo Link The Xeo Link receives wireless signals from a Xeo Hub or Xeo Extender and outputs analog and digital signals from its connections. As a result, you can also connect active subwoofers, active loudspeakers, or other components to the Xeo system. Xeo Link can also be connected to a 1st generation Xeo Transmitter (analog or optical ...

  • Dynaudio XEO 4 - page 27

    27 Connecting and establishing a link Hub Link 1. Connect the Power socket to the voltage supply via the Xeo power supply unit. Do not use a different power supply unit! 2. Select an audio zone: Red , Green , or Blue . Use one of the outputs to connect the Xeo Link with one of the active components, e.g. the active subwoofer Dynaudio Sub 600. 3. Se ...

  • Dynaudio XEO 4 - page 28

    28 Dynaudio Malfunctions Interruptions, clicking noises, or other audible interference when playing music is usually not caused by the radio transmission in the Xeo system. Often other external causes inuence the transmission quality . Below are a few tips for improving transmission quality: 1. Position all radio transmitters and receivers away ...

  • Dynaudio XEO 4 - page 29

    29 T echnical data Loudspeakers Xeo 4 Xeo 6 Frequency range (± 3 dB) 45 Hz – 23 kHz 31 Hz – 23 kHz Power consumption during operation 5 – 38 W 7.4 – 77 W Power consumption in standby 0.34 W (with active network) 0.35 W (with active network) Amplier performance Woofer: 50 W , tweeter: 50 W Woofer: 2 x 50 W , tweeter: 50 W Dimensions (W x ...

  • Dynaudio XEO 4 - page 30

    30 Dynaudio Reminding This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à Ia section 15 des régl ...

  • Dynaudio XEO 4 - page 31

    31 IC NOTICE This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR ...

  • Dynaudio XEO 4 - page 32

    All there is . Dynaudio A/S, 8660 Skanderborg, Denmark Sales & Marketing: Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany , Phone: +49 4108 - 41 80 - 0 www .dynaudio.com © Dynaudio Inter national GmbH, Xeo Owner’s Manual 0714 Item No . 4552612. All text and image copyrights reserved. Subject to change without notice . ...

メーカー Dynaudio カテゴリー Speaker

Dynaudio XEO 4のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- XEO 4の取扱説明書
- Dynaudioの製品カード
- パンフレット
- またはDynaudio XEO 4の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Dynaudio XEO 4の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Dynaudio XEO 4の取り付け説明書、サービスマニュアル、簡易説明書、またはDynaudio XEO 4のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Dynaudio XEO 4の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Dynaudio XEO 4デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがDynaudio XEO 4を使用するのを助ける技術的文書のことです。説明書は通常、全てのDynaudio XEO 4ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Dynaudioの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Dynaudio XEO 4の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははDynaudio XEO 4の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Dynaudio XEO 4に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Dynaudio XEO 4デバイスの基本機能を使うにあたってのヒント。 Dynaudio XEO 4のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Dynaudio XEO 4に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるDynaudio XEO 4のメーカー/サービスへの連絡先に関する情報。

Dynaudio XEO 4についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもDynaudio XEO 4の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがDynaudio XEO 4で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)