Weider WEEVSY87210の取扱説明書

30ページ 0.86 mb
ダウンロード

ページに移動 of 30

Summary
  • Weider WEEVSY87210 - page 1

    USER'S MANUAL QUESTIONS? As a manufacturer , we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, please call: Or write: ICON Health & Fitness Ltd. Unit 4 Revie Road Industrial Estate Revie Road Beeston Leeds, LS1 1 8JG UK email: csuk@iconeurope.com Model No. WEEVS ...

  • Weider WEEVSY87210 - page 2

    2 T ABLE OF CONTENTS IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBL Y . . . . . . . . . . . ...

  • Weider WEEVSY87210 - page 3

    The decals shown below have been placed on the weight system in the locations shown. If decals are missing or illegible, please call our Customer Service Department to order free replacement decals (see the back cover of this manual). Apply the decals in the locations shown. 3 • Misuse of this product may result in serious injury . W ARNING ! • ...

  • Weider WEEVSY87210 - page 4

    4 BEFORE YOU BEGIN ASSEMBLED DIMENSIONS: Height: 188 cm (74 in.) Width: 102 cm (40 in.) Length: 135 cm (53 in.) Foot Plate Low Pulley Station High Pulley Station Lat Bar Seat Leg Lever Butterfly Arms Press Arm Weight Stack Weight Pin Backrest Stepper Pedals Resistance Cylinders Thank you for selecting the versatile WEIDER ® 8515 weight system. The ...

  • Weider WEEVSY87210 - page 5

    5 ASSEMBL Y 1 56 High Side of Bracket Handles 3 5 51 Long Side 31 51 14 1 1 27 4 Before beginning assembly , carefully read the following information and instructions: • Place all parts of the weight system in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. • The assembly is ...

  • Weider WEEVSY87210 - page 6

    6 FRAME ASSEMBL Y 2. Slide the Front Upright (42) onto the 5/16” x 2 1/2” Carriage Bolts (1) in the Base (4). Hand tighten a 5/16” Nylon Locknut (3) onto each Carriage Bolt. Do not tighten the Nylon Locknuts yet. Press a 1” Square Inner Cap (65) into the Front Upright (42). Attach the slotted end of the Brace (87) to the 5/16” x 2 1/2” ...

  • Weider WEEVSY87210 - page 7

    5. Lubricate the pedal axles on the Rear Upright (56). Slide the Left Pedal (79) onto the left pedal axle, and the Right Pedal (78) onto the right pedal axle. Note: Make sure that the Pedals are on the correct sides; the slot- ted brackets must be on the insides of the Pedals. Hold a 1" Retainer (69) and a 1" Round Cover Cap (70) against ...

  • Weider WEEVSY87210 - page 8

    8 FRAME ASSEMBL Y ARM ASSEMBL Y 9. Press the Weight Tube Bumper (64) into the end of the Weight Tube (63). Insert the Weight Tube into the stack of W eights (25). Be sure that the pins on the Weight T ube are sitting in the pin grooves in the top Weight. Lubricate the insides of the holes in the T op Weight (76). Set the T op Weight onto the stack ...

  • Weider WEEVSY87210 - page 9

    9 ARM ASSEMBL Y 12. Wet the handle of one Press Arm (46) with soapy water . Slide a 5” Plastic Grip (31) onto the handle. Press a 1” Round Inner Cap (49) into the other end of the handle. Press a 1 3/4” Square Inner Cap (44) into the top of the Press Arm. Attach the Press Arm (46) to one side of the Press Frame (17) with two 5/16” x 2 1/2? ...

  • Weider WEEVSY87210 - page 10

    10 CABLE ASSEMBL Y As you assemble the cables and pulleys in steps 14 through 22, please refer to the CABLE DIAGRAM on page 22 of this manual. 14. Route the Long Cable (23) around the 3 1/2” Pulley (15) attached to the T op Frame (55). Be sure that the end of the Cable with the ball is on the indicated side of the Pulley and that the Cable is bet ...

  • Weider WEEVSY87210 - page 11

    CABLE ASSEMBL Y 17 15 50 20 21 57 15 23 6 66 48 7 16 23 68 16. Route the Long Cable (23) around the “V”- Pulley (6) on the Right Arm (48). Be sure that the Cable is in the groove of the “V”-Pulley and that the Long Cable T rap (50) is turned to hold the Cable in place. T ighten the 3/8” x 2 1/2” Bolt (7) and the 3/8” Nylon Locknut (no ...

  • Weider WEEVSY87210 - page 12

    18. Route the Long Cable (23) around the 3 1/2” Pulley (15) attached to the bracket on the T op Frame (55). T ighten the 3/8” x 2” Bolt (12) and the 3/8” Nylon Locknut (21). (Note: This Pulley is pre-assembled. It has been shown disassembled for easy part identifi- cation.) Be sure that the Cable is in the groove of the Pulley and that the ...

  • Weider WEEVSY87210 - page 13

    CABLE ASSEMBL Y 12 3 6 9 58 15 21 66 92 9 17 20 21 2 2 10 58 67 10 57 58 20. Route the Short Cable (58) around the 3 1/2” Pulley (15) attached to the upper hole in the Press Frame (17). Be sure that the Cable T rap (66) is in the “3 o’clock” position and that the Cable is routed around the Pulley as shown. T ighten the 3/8” Nylon Locknut ...

  • Weider WEEVSY87210 - page 14

    14 CABLE ASSEMBL Y 22. Attach the Long Cable (23) to the Small “U”- Bracket (67) with a 1/4” Nylon Locknut (2) and a 1/4” W asher (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable so only a couple of threads are showing above the Nylon Locknut, as shown in the inset drawing. Attach the Small ...

  • Weider WEEVSY87210 - page 15

    15 25. Press a 1 1/2” Square Inner Cap (32) into the Leg Lever (29). Lubricate the 5/16” x 2 1/4” Bolt (33). Attach the Leg Lever (29) to the Seat Frame (36) with the 5/16” x 2 1/4” Bolt and a 5/16” Nylon Locknut (3). Insert the 3/8” x 2” Eyebolt (35) into the Leg Lever (29) from the direction shown. T ighten a 3/8” Nylon Locknut ...

  • Weider WEEVSY87210 - page 16

    16 28. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in HOW T O USE THE WEIGHT SYSTEM, beginning on page 17. Before using the weight system, pull each cable a few times to be sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly , find and correct t ...

  • Weider WEEVSY87210 - page 17

    17 HOW T O USE THE WEIGHT SYSTEM The instructions below describe how each part of the weight system can be adjusted. IMPORT ANT : When attaching the lat bar or nylon strap, make sure that the attachments are in the correct starting position for the exercise to be performed. If there is any slack in the cables or chain as an exercise is performed, t ...

  • Weider WEEVSY87210 - page 18

    18 A TT ACHING AND REMOVING THE SEA T Set the bracket on the Seat Frame (36) onto the indi- cated pins on the Front Upright (42). Attach the Seat Frame to the Front Upright with the 5/16” x 2 3/4” Carriage Bolt (14) and the Seat Knob (40). For some exercises, the Seat (13) must be removed. First, be sure that the chain is not attached to the le ...

  • Weider WEEVSY87210 - page 19

    LOCKING THE WEIGHT ST ACK When the weight system is not in use, the Lock Pin (90) and Lock (91) should be attached. Insert the Lock Pin through a Weight Guide (62). Attach the Lock to the Lock Pin. 91 90 62 19 ...

  • Weider WEEVSY87210 - page 20

    20 WEIGHT PRESS ARM BUTTERFL Y ARM LEG LEVER HIGH PULLEY LOW PULLEY PLA TES (lbs.) (lbs.) (lbs.) (lbs.) (lbs.) To p 2 0 1 0 1 5 1 4 2 4 14 5 2 2 3 6 2 8 5 4 27 0 3 3 5 4 4 4 8 2 39 9 4 2 7 5 6 0 1 1 5 4 128 48 96 72 147 5 153 60 1 15 90 175 6 184 69 137 103 209 WEIGHT RESIST ANCE CHART This chart shows the approximate weight resistance at each stat ...

  • Weider WEEVSY87210 - page 21

    21 TROUBLESHOOTING AND MAINTENANCE Inspect and tighten all parts often and replace any worn parts immediately . The weight system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. TIGHTENING THE CABLES Woven cable, the type of cable used on the weight system, can stretch slightly when it is first used. If there ...

  • Weider WEEVSY87210 - page 22

    22 4 3 2 7 6 5 4 3 2 Weight Stack— 8 1 —Low Pulley 1 —High Pulley Long Cable (23) 5 —Long “U”-Bracket Short Cable (58) TOP V IE W CABLE DIAGRAM The cable diagram below shows the proper routing of the Short Cable (58) and the Long Cable (23). Use the diagram to be sure that the two cables and the cable traps have been assembled correctly ...

  • Weider WEEVSY87210 - page 23

    NOTES 23 ...

  • Weider WEEVSY87210 - page 24

    ORDERING REPLACEMENT P ARTS If you encounter any difficulties or problems with this product, contact the ICON Fitness Lifestyle Ltd. of fice, or write: ICON Health & Fitness Ltd. Unit 4 Revie Road Industrial Estate Revie Road Beeston Leeds, LS1 18JG UK T el: Country Code: Outside the UK: 0 (044) 1 13 387 7133 Fax: 0 (044) 1 13-387 7125 When ord ...

  • Weider WEEVSY87210 - page 25

    IMPORT ANT: Assembly is divided into four stages: 1) frame assembly , 2) arm assembly , 3) cable assembly , and 4) seat assembly . The hardware for each stage is packaged separately . W ait until you begin each assem- bly stage to open that parts bag. This chart is provided to help you identify the small parts used in assembly . Important: Some par ...

  • Weider WEEVSY87210 - page 26

    1" Round Inner Cap (49) 1" Round Cover Cap (70) 3/4" Round Inner Cap (34) 1/2" x 3/4" Spacer (61) 1 1/2" Square Inner Cap (32) 1 3/4" Square Inner Cap (44) 2" Square Inner Cap (27) 2" Square Outer Cap (51) 1" x 7/8" Plastic Bushing (75) 1" Square Inner Cap (65) 5/8" x 9/16" Space ...

  • Weider WEEVSY87210 - page 27

    5/16" Nylon Locknut (3) 1/4" W asher (10) 5/16" W asher (8) 1" Retainer (69) 1/4" x 2 1/2" Screw (43) 5/16" x 1 3/4" Bolt (72) 1/4" x 2" Machine Screw (24) 5/16" x 2" Eyebolt (35) 5/16" x 2 1/2" Carriage Bolt (1) 5/16" x 2 3/4" Carriage Bolt (14) 1/4" x 1/2" S ...

  • Weider WEEVSY87210 - page 28

    81 REMOVE THIS P ART LIST/EXPLODED DRA WING FROM THE MANUAL SA VE THIS P ART LIST/EXPLODED DRA WING FOR FUTURE REFERENCE ...

  • Weider WEEVSY87210 - page 29

    Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover for information about ordering replacement parts. Key No. Qty . Description 1 3 5/16” x 2 1/2” Carriage Bolt 2 3 1/4” Nylon Locknut 3 18 5/16” Nylon Locknut 4 1 Base 5 1 Stabiliser 6 3 “V”-Pulley 7 3 3/8” x 2 1/2” ...

  • Weider WEEVSY87210 - page 30

    23 11 11 8 8 55 27 12 15 44 15 71 23 21 44 21 3 61 60 3 3 5 51 14 19 26 51 25 64 63 3 76 72 9 92 3 3 4 1 27 65 41 10 43 3 21 6 50 7 42 7 50 6 21 69 70 69 70 47 48 44 45 44 45 52 53 39 49 62 2 10 67 54 31 31 74 12 68 55 3 21 66 15 20 74 31 49 46 31 46 22 3 9 16 15 21 58 59 17 21 44 44 66 73 71 49 13 40 38 37 18 32 28 30 34 10 2 24 36 30 34 14 33 3 2 ...

メーカー Weider カテゴリー Home Gym

Weider WEEVSY87210のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- WEEVSY87210の取扱説明書
- Weiderの製品カード
- パンフレット
- またはWeider WEEVSY87210の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Weider WEEVSY87210の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Weider WEEVSY87210の取り付け説明書、サービスマニュアル、簡易説明書、またはWeider WEEVSY87210のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Weider WEEVSY87210の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Weider WEEVSY87210デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがWeider WEEVSY87210を使用するのを助ける技術的文書のことです。説明書は通常、全てのWeider WEEVSY87210ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Weiderの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Weider WEEVSY87210の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははWeider WEEVSY87210の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Weider WEEVSY87210に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Weider WEEVSY87210デバイスの基本機能を使うにあたってのヒント。 Weider WEEVSY87210のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Weider WEEVSY87210に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるWeider WEEVSY87210のメーカー/サービスへの連絡先に関する情報。

Weider WEEVSY87210についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもWeider WEEVSY87210の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがWeider WEEVSY87210で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)