Honeywell MicroDock IIの取扱説明書

19ページ 0.48 mb
ダウンロード

ページに移動 of 19

Summary
  • Honeywell MicroDock II - page 1

    iERP: 126102 D5618/7 [English] © BW T echnologies 2008. All rights reserved. Quic k R eference Guide Automatic T est and Calibration Station ...

  • Honeywell MicroDock II - page 2

    Limited W arranty an d Limitati on Liability BW T echnologies LP ( BW) warrants the product to be free from defects i n material and workmanship under normal use and servi ce f or a period of two years, beginning o n the date of shipment to the buyer. This warranty extends only to the sale of new and unused produ cts to the original buyer . BW’s ...

  • Honeywell MicroDock II - page 3

    1 MicroDock II Introducti on a Wa r n i n g T o ensure personal safety , read Safety Information - Read First before using the MicroDock II base station. The MicroDock II Automatic T est and Calibration Station (“the base station”) provides automated calibration and bump testing for the GasAlert Extreme, GasAlertClip Extreme, GasAlertMi- cro, G ...

  • Honeywell MicroDock II - page 4

    MicroDock II Quick Reference Guide 2 Display Elements Pushbuttons Item Function AC power Batteries fully charged Batteries h alf-charged Batteries at low level MultiMediaCar d (MMC) MultiMediaCar d (MMC) not inserted T est pass and option enab led T est fail a nd option disabled Cursor and se nsor disabled Scroll up Scroll down Selectio n arrow Sel ...

  • Honeywell MicroDock II - page 5

    3 MicroDock II User Options Me nu User Options Menu Description Display Time /D at e modifies the time and date of the base station. Inlet Setup enters the gas type, the gas concentratio n levels, and the gas cylinder lot numbe rs. Pump Setup modifies the station pump speed. Recommended pump speeds are 40-45% (350 ml/min.). The pump speed must be s ...

  • Honeywell MicroDock II - page 6

    MicroDock II Quick Reference Guide 4 Installation Item Description 1 Inlet filter assembly 2 C-cell batteries (4) 3 Battery cover 4 Philips pan head retaining screws (2) 5 MultiMediaCard (MMC) 6 Battery compartment 7 Charger port 8 USB port 9 Power port 10 Exhaust outlet 1 1 Gas cylinder 12 Demand flow regulator 13 Calibration gas hose ...

  • Honeywell MicroDock II - page 7

    5 MicroDock II Installation a War n i n g The atmosphere must be free of background gas. Do not use the base station in a hazardous area. All required National Electrical Codes (NEC) and safety standards must be followed. Note The base station can operate from either an electrical power source or batteries. The batteries will provide automatic back ...

  • Honeywell MicroDock II - page 8

    MicroDock II Quick Reference Guide 6 Inserting the Detector a Caution Infrared or intense ambient light (sun or halogen) may interfere with the base station/detector communication. T o insert a detector into a docking module, complete the follow- ing: 1. Activate the detector and wait until it is in normal operation. 2. Ensure the alligator clip is ...

  • Honeywell MicroDock II - page 9

    7 MicroDock II Using the Base Station • When the detector has been inserted correctly , the RUN LEDs light yellow , Unit Inserted displays on the base station LCD, and MicroDock displays on the detector LCD. The base station LCD displays the docking mod- ule number , and the type and serial num ber of the detector . GasAlertMicroClip Important: I ...

  • Honeywell MicroDock II - page 10

    MicroDock II Quick Reference Guide 8 The base station pushbuttons are not labelled. The base station is operated by pressing the C pushbutton that is located directly below the option that displays on the LCD. Activating the S tation 1. T o activate the station, press and hold C (the left- most button) until the following screen displays. The norma ...

  • Honeywell MicroDock II - page 11

    9 MicroDock II Bump Tes t 5. Press C exit to return to normal operation. For more information on setting up inlets, gas types, and con- centration levels, refer to Inlet Setup in the MicroDock II Base St ation User Manual . Bump T est A bump test is performed to confirm that the detector is responding to gas, and that the audio and visual alarms ar ...

  • Honeywell MicroDock II - page 12

    MicroDock II Quick Reference Guide 10 A calibration adjusts the sensor sensitivity to ensure an accu- rate response to gas. T o calibrate a detector , complete the follow ing: 1. From the docking module of the applicable detector, press C CALIBRA T ION. 2. The gas is automatically applied. 3. When the calibration is complete, the system purges. The ...

  • Honeywell MicroDock II - page 13

    11 MicroDock II Automatic Datal og Download ( GasAlertMic roClip and GasAl ertMax XT docking module only) Successful Data T ransfe r: The P ASS LED lights green on the docking module and Pass displays on the base station LCD. From the LCD, press C Pass to return to normal operation. Unsuccessful Data T ransfer: The F AIL LED lights red on the docki ...

  • Honeywell MicroDock II - page 14

    MicroDock II Quick Reference Guide 12 • GasAlertMicroClip • GasAlertMax XT The detector can be configured prior to performing a bump test or calibration to • change user options, • sensor options, and • program options. The detector can also be configured to disallow bump tests or calibrations unless performed with the MicroDock II. For m ...

  • Honeywell MicroDock II - page 15

    13 MicroDock II Maintenanc e 4. Allow the battery to obtain a full charge (2 to 4 hours, depending upon how many docking modules are con- nected to this station). If a docking module is in q ueue waiting to charge, the CHARGE LED flashes red (all charging modules). When the docking module begins charging, the CHARGE LED stops flashing and lights so ...

  • Honeywell MicroDock II - page 16

    MicroDock II Quick Reference Guide 14 Specifications The MicroDock II base station and docking modules are for indoor use only . Instrument dimensions: (w x l x h) 21.2 x 26.3 x 8.2 cm (8.3 x 10.4 x 3.2 in.) base station and one docking module Weight: 0.98 kg (2.15 lb.) Base system ingress protection: IP20 Operating temperature: +10°C to +35°C (+ ...

  • Honeywell MicroDock II - page 17

    15 MicroDock II Charger Speci fications Charger Specifications Size: 8.6 x 8.2 x 7.8 cm (3.4 x 3.2 x 3.1 in.) Weight: 97 g (3.4 oz.) per model Charger system ingress protection: IP20 Operating temperature: 10°C to 35°C (50°F to 95°F) Humidity: 0 to 50% Altitude: 2000 m (6561.66 ft.) Power: 6 Vdc , 2.5 A Charging LED: Color-coded LED indicates c ...

  • Honeywell MicroDock II - page 18

    MicroDock II Quick Reference Guide 16 ...

  • Honeywell MicroDock II - page 19

    iERP: 126102 D5618/7 [English] © BW T echnologies 2008. All rights reserved. Quic k R eference Guide Automatic T est and Calibration Station ...

メーカー Honeywell カテゴリー Carbon Monoxide Alarm

Honeywell MicroDock IIのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- MicroDock IIの取扱説明書
- Honeywellの製品カード
- パンフレット
- またはHoneywell MicroDock IIの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Honeywell MicroDock IIの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Honeywell MicroDock IIの取り付け説明書、サービスマニュアル、簡易説明書、またはHoneywell MicroDock IIのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Honeywell MicroDock IIの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Honeywell MicroDock IIデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがHoneywell MicroDock IIを使用するのを助ける技術的文書のことです。説明書は通常、全てのHoneywell MicroDock IIユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Honeywellの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Honeywell MicroDock IIの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははHoneywell MicroDock IIの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Honeywell MicroDock IIに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Honeywell MicroDock IIデバイスの基本機能を使うにあたってのヒント。 Honeywell MicroDock IIのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Honeywell MicroDock IIに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるHoneywell MicroDock IIのメーカー/サービスへの連絡先に関する情報。

Honeywell MicroDock IIについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもHoneywell MicroDock IIの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHoneywell MicroDock IIで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)