Jonsered FC 2145の取扱説明書

40ページ 2.24 mb
ダウンロード

ページに移動 of 40

Summary
  • Jonsered FC 2145 - page 1

    Operator’ s manual (EP A) Please read the operator’ s manual carefully and make sure y ou understand the instructions before using the mac hine. ...

  • Jonsered FC 2145 - page 2

    2 – English KEY T O SYMBOLS Symbols W ARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injur y to the operator or others. Please read the operator’ s manual carefully and make sure y ou understand the instructions before using the machine . Alwa ys wear : • A protectiv ...

  • Jonsered FC 2145 - page 3

    English – 3 CONTENTS Contents Note the f ollowing bef ore star ting: Jonsered has a policy of continuous product de velopment and theref ore reser ves the right to modify the design and appearance of products without prior notice. Long-term exposure to noise can result in permanent hear ing impairment. So always use appro ved hearing protection. ...

  • Jonsered FC 2145 - page 4

    4 – English INTR ODUCTION Dear customer! Congratulations on y our choice to buy a Jonsered product! Y our purchase giv es you access to prof essional help with repairs and ser vice whenev er this may be necessary . If the retailer wh o sells your machine is not one of our authorized dealers , ask for the address of your nearest servicing dealer . ...

  • Jonsered FC 2145 - page 5

    5 – English WHA T IS WHA T? What is what on the c learing saw? (BC 2145) 26 27 28 30 25 6 3 2 51 7 13 11 10 12 14 23 16 15 4 22 24 33 9 32 8 7 18 20 19 21 4 1 31 21 29 34 34 2 3 4 35 36 1 Grass b lade 2 Grease filler cap , bev el gear 3 Be vel gear 4 Cutting attachment guard 5 Shaft 6 Handlebar 7 Throttle control 8 Stop s witch 9 Throttle lock 1 ...

  • Jonsered FC 2145 - page 6

    English – 6 WHA T IS WHA T? What is what on the c learing saw? (FC 2145, FC 2145 S) 24 27 25 26 23 6 3 5 13 11 12 9 7 17 8 14 16 15 21 22 18 1 4 20 18 19 28 29 30 2 3 4 10 31 1 Saw b lade 2 Grease filler cap , bev el gear 3 Be vel gear 4 Cutting attachment guard 5 Shaft 6 Handlebar 7 Throttle control 8 Stop s witch 9 Throttle lock 10 Suppor t ey ...

  • Jonsered FC 2145 - page 7

    English – 7 GENERAL SAFETY PRECA UTIONS Impor tant P ersonal pr otective equipment HELMET A helmet should be worn if the trees being cleared are taller than 2 m. HEARING PRO TECTION W ear hearing protection that provides adequate noise reduction. EYE PRO TECTION Alwa ys wear approv ed eye protection. If you use a visor then you m ust also wear ap ...

  • Jonsered FC 2145 - page 8

    8 – English GENERAL SAFETY PRECA UTIONS Machine ′ s safety equipment This section describes the machine ′ s saf ety equipment, its pur pose, and ho w checks and maintenance should be carried out to ensure that it operates correctly . See the ”What is what?” section to locate where this equipment is positioned on your machine . The lif e s ...

  • Jonsered FC 2145 - page 9

    English – 9 GENERAL SAFETY PRECA UTIONS Cutting attachment guar d This guard is intended to pre vent loose objects from being thrown to wards the operator . The guard also protects the operator from accidental contact with the cutting attachment. Check that the guard is undamaged and not cr ack ed. Replace the guard if it has been e xposed to imp ...

  • Jonsered FC 2145 - page 10

    10 – English GENERAL SAFETY PRECA UTIONS Ne ver use a machine that has a f aulty muffler . Regularly check that the muffler is securely attached to the machine. If the muffler on y our machine is fitted with a spark arrestor mesh this must be cleaned regularly . A bloc ked mesh will cause the engine to ov erheat and may lead to serious damage ...

  • Jonsered FC 2145 - page 11

    English – 11 GENERAL SAFETY PRECA UTIONS Cutting equipment This section describes how to choose and maintain your cutting equipment in order to: • Reduce the risk of blade thrust. • Obtain maximum cutting perf or mance. • Extend the lif e of cutting equipment. Cutting equipment Saw b lades are intended for cutting fibrous types of wood. Gr ...

  • Jonsered FC 2145 - page 12

    12 – English GENERAL SAFETY PRECA UTIONS Sharpening the saw b lade • See the cutting attachment packaging f or correct shar pening instructions. A correctly shar pened blade is essential f or working efficiently and to av oid unnecessar y wear to the blade and clearing saw . • Make sure that the b lade is well suppor ted when you file it. U ...

  • Jonsered FC 2145 - page 13

    English – 13 ASSEMBL Y Assembling the handlebar and thr ottle (BC 2145) • Remov e the screw at the rear of the throttle handle. • Slide the throttle handle onto the right side of the handlebar , (see diagram). • Align the screw hole in the throttle handle with the hole in the handlebar . • Refit the screw in the hole in the rear of the t ...

  • Jonsered FC 2145 - page 14

    14 – English ASSEMBL Y Fitting blades and trimmer heads When fitting the cutting attachment it is e xtremely impor tant that the raised section on the drive disc/support flange engages correctly in the centre hole of the cutting attachment. If the cutting attachment is fitted incorrectly it can result in serious and/or fatal personal injury . ...

  • Jonsered FC 2145 - page 15

    English – 15 ASSEMBL Y Fitting the blade guar d and saw blade • The blade guard (A) is fitted using 4 scre ws (L) as shown. CA UTION! Alwa ys use the recommended guard for the cutting attachment you are using. See chapter on T echnical data. • Fit the drive disc (B) on the output shaft. • T ur n the blade shaft until one of the holes in th ...

  • Jonsered FC 2145 - page 16

    16 – English ASSEMBL Y Fitting other guar ds and cutting attachments Fit the trimmer guard/combination guard (A) intended for use with the trimmer head/plastic blades. Hang the tr immer guard/combination guard (A) on the two hooks on the plate holder (M). Bend the guard around the shaft and tighten it with the bolt (L) on the opposite side of the ...

  • Jonsered FC 2145 - page 17

    English – 17 ASSEMBL Y 2 Grass clearing The machine should be suppor ted in a har ness when grass clearing so that the cutting equipment is parallel to the ground. V ector harness Safety release Push down the red release le ver to release the machine from the harness. Adjusting the harness 1 Tighten the hip strap so that it sits securely . 2 Tigh ...

  • Jonsered FC 2145 - page 18

    18 – English FUEL HANDLING Fuel safety Ne ver start the machine: 1 If you ha ve spilt fuel on it. Wipe off the spillage and allow remaining fuel to e vapor ate. 2 If you ha ve spilt fuel on yourself or y our clothes, change your clothes . W ash any par t of your body that has come in contact with fuel. Use soap and water . 3 If the machine is lea ...

  • Jonsered FC 2145 - page 19

    English – 19 FUEL HANDLING Mixing • Alwa ys mix the gasoline and oil in a clean container intended f or fuel. • Alwa ys star t by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline. • Mix (shake) the fuel mixture thoroughly bef ore filli ...

  • Jonsered FC 2145 - page 20

    20 – English ST AR TING AND ST OPPING Chec k bef ore star ting • Check the b lade to ensure that no cracks ha ve f or med at the bottom of the teeth or by the centre hole . The most common reason wh y crac ks are f ormed is that shar p corners have been f or med at the bottom of the teeth while shar pening or that the blade has been used with d ...

  • Jonsered FC 2145 - page 21

    English – 21 ST AR TING AND ST OPPING If the machine is fitted with a decompression valv e (A): Press the valv e to reduce the pressure in the cylinder and make star ting easier . Y ou should alw a ys use the decompression valv e when star ting the machine. Once the machine has star ted the valv e will automatically retur n to its or iginal sett ...

  • Jonsered FC 2145 - page 22

    22 – English W ORKING TECHNIQUES General w orking instructions Basic safety rules 1 Look around you: • T o ensure that people, animals or other things cannot aff ect your control of the machine . • T o ensure that people, animals, etc., do not come into contact with the cutting attachment or loose objects that are thrown out b y the cutting a ...

  • Jonsered FC 2145 - page 23

    English – 23 W ORKING TECHNIQUES W orking methods • Bef ore you start clear ing, check the clearing area, the type of terrain, the slope of the ground, whether there are stones, hollo ws etc. • Star t at whichev er end of the area is easiest, and clear an open space from which to work. • W ork systematically to and fro across the area, clea ...

  • Jonsered FC 2145 - page 24

    24 – English W ORKING TECHNIQUES Brush cutting with a saw b lade • Thin stems and brush are mown down. W or k with a sawing mo vement, s winging sidew ays. • T r y to cut sev eral stems in a single sawing mov ement. • With groups of hardwood stems , first clear around the group . Star t by cutting the stems high up around the outside of th ...

  • Jonsered FC 2145 - page 25

    English – 25 W ORKING TECHNIQUES Grass trimming with a trimmer head T rimming • Hold the trimmer head just above the g round at an angle. It is the end of the cord that does the work. Let the cord work at its own pace. Nev er press the cord into the area to be cut. • The cord can easily remov e grass and weeds up against walls , f ences, tree ...

  • Jonsered FC 2145 - page 26

    26 – English MAINTENANCE Carb uretor Y our Jonsered product has been designed and manuf actured to specifications that reduce harmful exhaust fumes. The engine will be run in after it has used 8-10 tanks of fuel. T o ensure that the engine runs at peak performance and produces as little harmful exhaust fumes as possible after the running-in per ...

  • Jonsered FC 2145 - page 27

    English – 27 MAINTENANCE Fine adjustment of the idle speed T Adjust the idle speed using the idle adjustment screw T , if it is necessar y to readjust. First turn the idle adjustment screw T clockwise until the cutting attachment starts to rotate. Then turn the screw anticlockwise until the cutting attachment stops. The idle speed is correctly ad ...

  • Jonsered FC 2145 - page 28

    28 – English MAINTENANCE Muffler CA UTION! Some mufflers are fitted with a catalytic conv er ter. See chapter on T echnical data to see whether your machine is fitted with a catalytic conv er ter. The muffler is designed to reduce the noise le vel and to direct the e xhaust gases aw ay from the operator . The exhaust gases are hot and can co ...

  • Jonsered FC 2145 - page 29

    English – 29 MAINTENANCE Cleaning the air filter Remov e the air filter cover and tak e out the filter . Wash it clean in warm, soapy w ater. An oiled f oam plastic filter (av ailable as an accessory) must be used if the machine is operated in e xtremely dusty conditions. See instr uctions under the heading Oiling the air filter . Oiling the ...

  • Jonsered FC 2145 - page 30

    30 – English MAINTENANCE Winter use Running problems can occur when using the machine in the cold and snowy conditions caused b y: • T oo low engine temperature. • Icing of the air filter and carburetor . Special measures are theref ore often required: • P ar tly mask the air inlet on the starter to increase the working temperature of the ...

  • Jonsered FC 2145 - page 31

    English – 31 MAINTENANCE Maintenance schedule The f ollowing is a list of the maintenance that must be perf or med on the machine. Most of the items are descr ibed in the Maintenance section. The user must only carr y out the maintenance and ser vice work described in this manual. More extensiv e work must be carried out by an authorised ser vice ...

  • Jonsered FC 2145 - page 32

    32 – English TECHNICAL D A T A T echnical data Note 1: Equivalent sound pressure le vel is calculated as the time-weighted energy total f or sound pressure lev els under various working conditions with the follo wing time distr ibution: 1/2 idling and 1/2 max speed. NO TE! Noise pressure at the user’ s ear and vibration on the handles are measu ...

  • Jonsered FC 2145 - page 33

    English – 33 TECHNICAL D A T A Appro ved accessories T ype Cutting attachment guar d, Ar t. no. Centre hole in blades/cutters Ø 20 mm: FC Ø 1”: BC Output shaft thread M12 Grass b lade/grass cutter Multi 275-4 (Ø 275 4 teeth) 537 28 85-02 Multi 300-3 (Ø 300 3 teeth) 537 28 85-02 Saw b lade Opti XS 200-22 (Ø 200 22 teeth) 537 21 71-01 Opti X ...

  • Jonsered FC 2145 - page 34

    34 – English FEDERAL EMISSION CONTR OL W ARRANTY ST A TEMENT Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EP A (The US Environmental Protection Agency), Environment Canada and Jonsered are pleased to e xplain the emissions control system warranty on y our 2001 and later small nonroad engine. In U.S . and Canada, new small nonroad engines must be d ...

  • Jonsered FC 2145 - page 35

    1 Poly T rim 2 3 4 5 6 7 8 <20mm >20mm ! B A 6 Nm X 10 ...

  • Jonsered FC 2145 - page 36

    1 2 3 4 5 6 7 8 9 35-50 NM ~ 15 cm 6' "Clic" ~ 3,5 m 11 ' 7,0 m 23' 2,4-3,3 mm .095"-.130" 12 cm 5" T rimmy SII ...

  • Jonsered FC 2145 - page 37

    ...

  • Jonsered FC 2145 - page 38

    ´®z*x})¶5¢¨ ´®z*x})¶5¢¨ 2,7-3,3 mm .106-.130" 15 cm 6" 15 cm 6" 15 cm 6" 15 cm 6" 1 2 3 5 6 7 10 11 1.) 2.) >1,1 Kw <1,1 Kw 2,7 mm - 9,0 m 3,0 mm - 7,5 m 3,3 mm - 6,0 m 4 8 Auto 55 ...

  • Jonsered FC 2145 - page 39

    "Clic" 1 2 3 5 6 7 9 10 m 32' 4 8 4,3 m 14' 2,7-3,3 mm .106-.13" 10 cm 4" 6" 15 cm T ap n’Go 45 ...

  • Jonsered FC 2145 - page 40

    ´®z*x})¶5¢¨ 2004-07-01 ´®z*x})¶5¢¨ 1088930-95 ...

メーカー Jonsered カテゴリー Brush Cutter

Jonsered FC 2145のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- FC 2145の取扱説明書
- Jonseredの製品カード
- パンフレット
- またはJonsered FC 2145の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Jonsered FC 2145の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Jonsered FC 2145の取り付け説明書、サービスマニュアル、簡易説明書、またはJonsered FC 2145のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Jonsered FC 2145の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Jonsered FC 2145デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJonsered FC 2145を使用するのを助ける技術的文書のことです。説明書は通常、全てのJonsered FC 2145ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Jonseredの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Jonsered FC 2145の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJonsered FC 2145の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Jonsered FC 2145に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Jonsered FC 2145デバイスの基本機能を使うにあたってのヒント。 Jonsered FC 2145のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Jonsered FC 2145に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJonsered FC 2145のメーカー/サービスへの連絡先に関する情報。

Jonsered FC 2145についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもJonsered FC 2145の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJonsered FC 2145で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)