Minolta CD-10の取扱説明書

30ページ 0.15 mb
ダウンロード

ページに移動 of 30

Summary
  • Minolta CD-10 - page 1

    Pr eface Pr ecautions T able of Contents Pr oduct Outline Accessories Names of Parts Connecting with a Computer Basic Operations Using the PC Card Drive CD-10 with a Macintosh Using the PC Card Drive CD-10 with IBM PC/A T Compatibles T r oubleshooting Specifications E INSTRUCTION MANUAL ...

  • Minolta CD-10 - page 2

    ...

  • Minolta CD-10 - page 3

    1 Getting Started Pr eface Thank you very much for purchasing the Minolta PCMCIA Card Drive CD-10. The Minolta PCMCIA Card Drive CD-10 can be connected to various makes of personal computers to read and write PC cards (PCMCIA/JEIDA specifications) and PC card adapter sets like the Minolta RM-2S/RM-4S SmartMedia™ image memory cards used with the M ...

  • Minolta CD-10 - page 4

    2 Pr ecautions Safety Pr ecautions and handling Power cord - Do not bend the power cord excessively or place heavy objects on it. Damage to the cord may cause fire or electric shock. - Do not pull the cord itself to unplug; always hold the plug and pull. - Do not plug or unplug with wet hands. - Unplug from the outlet when you are not using the uni ...

  • Minolta CD-10 - page 5

    3 Getting Started Power sour ce Use a standard domestic household power supply (100 to 240V , 50/60Hz). Proper places for use and storage - This unit is to be used at temperatures between +5 ° C and +40 ° C and at relative hu miditi e s b e tween 20% and 8 0% (n o c o ndensation ). - Do not use or store the unit in an excessively hot or cold plac ...

  • Minolta CD-10 - page 6

    4 FCC Radio Fr equency Interference W arning Notice for customers in U.S.A This equipment generates and uses radio frequency ener gy , and if not installed and used in strict accordance with the manufacturer ’ s instructions, can cause interference to radio and television reception. This equipment has been certified and found to comply with the l ...

  • Minolta CD-10 - page 7

    5 Getting Started PC Cards Most PC cards compatible with PCMCIA/JEIDA standard specifi- cations (A T A cards and SRAM cards) can be used. A variety of prod- ucts are compatible with the PCMCIA/JEIDA specification, but the specifications are ambiguous and certain rules allow a large latitude. As a result, some PC cards may not conform with the read/ ...

  • Minolta CD-10 - page 8

    6 T ABLE OF CONTENTS Preface 1 Precautions 2 T ABLE OF CONTENTS 6 1. Product Outline 7 Using with Macintosh computers 7 Using with IBM PC/A T compatible computers 7 2. Accessories 8 3. Names of Parts 9 4. Connecting with a Computer 1 1 Using without other SCSI devices 1 1 Using with other SCSI devices 12 Setting the SCSI ID 13 Turning on the power ...

  • Minolta CD-10 - page 9

    7 Getting Started 1. Pr oduct Outline This PC card drive is designed to be connected to a personal com- puter to read and write PC cards (A T A cards and SRAM cards). A SCSI interface is used to enable the device to be connected to a Ma- cintosh, IBM PC/A T compatible, and various other personal comput- ers. 1-1 Using with Macintosh computers Conne ...

  • Minolta CD-10 - page 10

    8 2. Accessories The PCMCIA Card Drive CD-10 package contains the following items: PCMCIA Card Drive CD-10 LOCK ACCESS POWER Mac-PC Manager™ Lite Contains Mac-PC Manager Lite, a software driver for connection with a Macintosh computer. PCMCIA Card Drive CD-10 User's Manual (this manual) AC Adapter Screwdriver to change SCSI ID address ASPIDI ...

  • Minolta CD-10 - page 11

    9 Getting Started 3. Names of Parts This drive unit consists of the following parts: FRONT P ANEL (1) Power Switch By sliding the switch back and forth from left to right, power is turned "on" and "off". (2) Power Indicator Lamp When power is on, light is green. (3) Access Indicator Lamp Indicates the access status of the PC car ...

  • Minolta CD-10 - page 12

    10 REAR P ANEL (7) T erminator Switch When this switch is "on", the terminator is active. When this is the last device on a SCSI chain, the switch should be set to "on" (for further details see section 4 on "Connecting with a Computer"). (8) SCSI connector SCSI cable is connected here (D-Sub25 pin). (9) AC adapter plug ...

  • Minolta CD-10 - page 13

    Connecting 11 4. Connecting with a Computer This drive unit connects to a computer through a SCSI ca- ble. There are two types of connection depending on whether or not an additional SCSI device is to be used. These two cases are discussed in this section. Note: There are several physical forms of SCSI connectors. Check the SCSI connector of the co ...

  • Minolta CD-10 - page 14

    12 NOTE: The cable included in this package is a D-Sub25 to 50-pin full-pitch, intended for use with most IBM PC/A T compatible computers. Macintosh users may require a D-Sub25 to D-Sub25 SCSI cable, available at most computer stores. 4-2 Using with other SCSI devices Since the SCSI standard supports connection to one computer and up to seven SCSI ...

  • Minolta CD-10 - page 15

    Connecting 13 SWITCH 0 1 2 3 4 5 6 7 8 9 SCSI ID 0 1 2 3 4 5 6 7 0 1 SCSI ID Switch SWITCH SCSI ID 1 0 1 0 23 5 46 7 8 9 1 0 23 5 46 7 SCSI ID 0 is assigned to the hard drive. SCSI ID 3 is assigned to the internal CD-ROM drive. SCSI ID 7 is assigned to the Macintosh system. 4-3 Setting the SCSI ID The SCSI ID is a unique number assigned to each SCS ...

  • Minolta CD-10 - page 16

    14 than 3 may be assigned. The SCSI ID for the built-in hard disk drive and the computer cannot be changed. Also, notice the SCSI IDs for Macintosh computers range from 0 to 7, the numbers on the SCSI switch are 0 through 9. If 8 and 9 on the switch are selected, IDs 0 and 1 are assigned, respectively . For IBM PC/A T compatible computers SCSI IDs ...

  • Minolta CD-10 - page 17

    Operating 15 5. Basic Operations This section describes the operation relating to PC cards and PC card sets. SmartMedia SSFDC cards (like Minolta's Image Memory Card RM-2S and RM-4S) can be used in the CD-10 card drive when used with an adapter, such as the PC Card Adapter CA-1S. When used together , the adapter and SmartMedia card are called ...

  • Minolta CD-10 - page 18

    16 first and then the PC card icon appears on the monitor . This is the “mounted” state, which enables read and write operations for the PC card set. The time required between card insertion and mounting depends on the card. Usually , the PC card set can be mounted within several sec- onds. (3) If the PC card or SmartMedia card is not formatted ...

  • Minolta CD-10 - page 19

    Operating 17 5-2 Removing the PC card set Make sure that the access indicator and lock indicator are not lit, then press the eject button to release the PC card set. When the access indicator is lit In this case, the data is being read or written. W ait until the opera- tions complete; then remove the card set. Removing a PC card or PC card set dur ...

  • Minolta CD-10 - page 20

    18 NOTE: The access indicator may flash on and of f even after the eject oper- ation. In this case, you can remove the PC card set. NOTE: Do not select the “Eject Disk” command from the “Special” menu to remove the card set. The CD-10 drive does not have an eject motor . The disk must be ejected manually . For IBM PC/A T compatible computer ...

  • Minolta CD-10 - page 21

    Macintosh 19 6. Using with a Macintosh 6-1 Functions of Mac-PC Manager Lite Mac-PC Manager Lite is a software driver that automati- cally mounts Macintosh formatted and DOS (MS-DOS/V , PC-DOS/V) formatted PC cards and floppy disks. Mac-PC Manager Lite provides the following functions: - Automatically mounts the Macintosh- formatted or DOS-formatted ...

  • Minolta CD-10 - page 22

    20 6-2 Installation pr ocedur e for Mac-PC Manager Lite Mac-PC Manager Lite is an extension and therefore it must be cop- ied into the extensions folder on the hard disk. System 7.1 or a later version is needed to run this extension. (1) Insert the floppy disk marked "Mac-PC Manager™ Lite". (2) Double click on the disk icon. The icon ? ...

  • Minolta CD-10 - page 23

    IBM/W indows 21 Windows 95 The PCMCIA Card Drive CD-10 connects with the Adaptec SCSI board. W indows 95 includes its own driver software, therefore it is not necessary to install additional driver software. However , when working in DOS mode, additional driver software is needed - please refer to the fol- lowing section, "Windows 3.1 and DOS& ...

  • Minolta CD-10 - page 24

    22 The PCMCIA Card Drive CD-10 connects to Adaptec’ s SCSI board. It also uses Adaptec’ s software driver EZ-SCSI. This section assumes that Adaptec’ s SCSI board and EZ- SCSI software are installed. For installation of the SCSI board and EZ-SCSI, consult the manuals for those items. When connecting the CD-10 drive to the computer with EZ-SCS ...

  • Minolta CD-10 - page 25

    IBM/W indows 23 Note: The following SCSI boards and ASPI managers can be used by the CD-10 drive with IBM PC/A T compatible computers: ASPI Manager: SCSI board: ASPI2DOS.SYS AHA-1510A, AHA-1522A, AP A-1460 ASPI4DOS.SYS AHA-1542CF ASP7DOS.SYS AHA-2742-A T , AHA-2840A ASPI8DOS.SYS AHA-2940 SCSI boards which use the AIC-7970 SCSI protocol chip in stan ...

  • Minolta CD-10 - page 26

    24 8. T r oubleshooting Corr ective Measure Insert the power plug securely into the outlet or computer . Use a standard SCSI cable. Use a standard SCSI cable (6m or shorter). Change the cable connections. Activate terminator . T urn off the power to the SCSI device then change the SCSI ID. T urn off the power to the SCSI device then change its SCSI ...

  • Minolta CD-10 - page 27

    T roubleshooting 25 Cause The power is not connected to an outlet or computer . Nonstandard SCSI cable is used. The SCSI cable is too long. The settings for the SCSI board are not ap- propriate. Loose connection in the SCSI connector . The terminator is not activated. The same SCSI ID is assigned to another SCSI device. A terminator is included in ...

  • Minolta CD-10 - page 28

    26 For questions regarding installation and PCMCIA card compatibility , please contact your dealer or a Minolta Ser - vice Facility . Be sure to include the following information in your correspondence: • The make and model of your computer . • System software and version number . • Information on any other connected SCSI devices. • The sym ...

  • Minolta CD-10 - page 29

    Specifications 27 9. Specifications Card type: A T A and SRAM cards that comply with PCMCIA PC Card Standard Release 2.1/JEIDA PC Card Guideline V er . 4.2, and PC Card A T A Release 1.01 PC card slot: 1 T ype I, II or III Host interface: SCSI-2 SCSI connector: D-Sub25 T ransfer rate: 3MB/sec (for asynchronous transfer) Power requir ements: AC 100V ...

  • Minolta CD-10 - page 30

    28 9222-2755-91 (9610-A610) Minolta Co., Ltd. ...

メーカー Minolta カテゴリー Computer Drive

Minolta CD-10のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- CD-10の取扱説明書
- Minoltaの製品カード
- パンフレット
- またはMinolta CD-10の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Minolta CD-10の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Minolta CD-10の取り付け説明書、サービスマニュアル、簡易説明書、またはMinolta CD-10のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Minolta CD-10の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Minolta CD-10デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMinolta CD-10を使用するのを助ける技術的文書のことです。説明書は通常、全てのMinolta CD-10ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Minoltaの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Minolta CD-10の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMinolta CD-10の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Minolta CD-10に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Minolta CD-10デバイスの基本機能を使うにあたってのヒント。 Minolta CD-10のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Minolta CD-10に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMinolta CD-10のメーカー/サービスへの連絡先に関する情報。

Minolta CD-10についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもMinolta CD-10の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMinolta CD-10で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)