Humminbird ProAnglerの取扱説明書

33ページ 0.44 mb
ダウンロード

ページに移動 of 33

Summary
  • Humminbird ProAngler - page 1

    ...

  • Humminbird ProAngler - page 2

    INSTALLATION PREPARATION PARTS SUPPLIED PARTS SUPPLIED Before installing your new Humminbird fishfinder, please ensure the following parts are included in the box: • Fishfinder • Transducer with 20’ (6m) of cable and mounting hardware kit • Mounting system an d mounting hardware kit • 6’ (2m) power cable • Publications kit It any of t ...

  • Humminbird ProAngler - page 3

    INSTALLATION PREPARATION INSTALLATION OVERVIEW Determining How to Mount the Transducer Your Humminb ird fishfinder includes a standard transducer. This transducer can be mounted on the transom of the boat or bonded to the inside of a fiberglass hull boat. The transom installation, which is the most widely used, places the transducer on the outside ...

  • Humminbird ProAngler - page 4

    INSTALLATION PREPARATION ALTERNATE M OUNTING METHODS ALTERNATE TRANSDUCERS AND MOUNTING METHODS Your Humminbird fishfinder comes with everything necessary for installation and operation on most boats. However, there are several situations which may require a different type of transducer. In board boats, wood or metal hulls, and sail boats create un ...

  • Humminbird ProAngler - page 5

    INSTALLATION PREPARATION TRANSDUCER EXCHANGE TRANSDUCER EXCHANGE Other transducers are available as replacements for the standard transducer. You may exchange your new and unassembled transducer for another type by returning i t to the address listed in Customer Support. Some transducers may have additional cost. Refer to the Accessory catalog or c ...

  • Humminbird ProAngler - page 6

    INSTALLAT ION TRANSOM INSTALLATION Do not begin this transducer installation until you read the Installation Preparation in the Operation Guide. This chapter contains information critical to the correct installation of your transducer. Due to the wide variety of b oat hulls, only general instructions are presented in the installation guide. Each bo ...

  • Humminbird ProAngler - page 7

    INSTALLATION TRANSOM INSTALLATION • If the propeller(s) is (are) forward of the transom, it may be impossible to find an area clear from turbulence, and a different mounting technique or transducer type should be considered. Step Two - Drill the Mounting Holes 1. Remove the mounting template from the front of the Operations Manual. 2. Hold the te ...

  • Humminbird ProAngler - page 8

    ...

  • Humminbird ProAngler - page 9

    INSTALLATION TRANSOM INSTALLATION Step Four - Mount the Transducer to the Transom 1. Apply silicone sealant to the mounting holes drilled into the transom. 2. Align the transducer assembly with the drilled holes in the transom (Figure 8). 3. U se either a flat head screwdriver, a 5/16" (8mm) hex driver, or a 5/16" (8mm) socket to mount th ...

  • Humminbird ProAngler - page 10

    mounting bracket. Drill this hole and install the screw after final testing and adjustments have been completed. ...

  • Humminbird ProAngler - page 11

    INSTALLATION TRANSOM INSTALLATION Step Six - Route the Cable There are several ways to route the transducer c able to the to the area where the control head will be installed. The most common procedure routes the cable through the transom into the boat. Inside the boat there is often a channel or conduit used for other wiring that the cable can be ...

  • Humminbird ProAngler - page 12

    INSTALLATION INSIDE THE HULL INSTALLATION INSIDE THE HULL INSTALLATION Inside the hull installation requires the mount system and control head be installed and operational. See Installing the Control Head for instruction on installing the unit. Inside the hull mountin g generally produces good results in single thickness fiberglass - hulled boats. ...

  • Humminbird ProAngler - page 13

    The transducer cannot transmit through air. The water purges any air from between the transducer and the hull and fills any voids in the coarse fiberglass surface. ...

  • Humminbird ProAngler - page 14

    INSTALLATION INSIDE THE HULL INSTALLATION 3. Power up the Control Head. 4. Run the boat at various speeds and water depths while observing the screen on the Control Head. If the unit functions well at low speeds but b egins to skip or miss the bottom at higher speeds, the transducer needs to be moved. If depth performance is required, test the fish ...

  • Humminbird ProAngler - page 15

    INSTALLATION CONTROL HEAD INSTALLATION CONTROL HEAD INSTALLATION Step One - Determine Where to Mount Begin the installation by determining where to mount the control head. Consider the following to determine best location: • The cables for power, transducer and temp/speed accessories (if applicable) should be installed first and must reach the mo ...

  • Humminbird ProAngler - page 16

    fuse in the connection. If you must wire the control head directly to a battery, be sure to install an inline fuse holder ...

  • Humminbird ProAngler - page 17

    INSTALLATION CONTROL HEAD INSTALLATION and one amp fuse (not inc luded) for the protection of the unit (Figure 21). Humminbird is not responsible for over voltage or over current failures. In order to minimize the potential for interference with other marine electronics a separate power source (such as a second batter y) may be necessary. Step Thre ...

  • Humminbird ProAngler - page 18

    Optional: If the ca bles pass outside the mounting bracket, install the hole cover over the hole and fasten in place using the two #8 x 7/8” (22mm) wood screws (Figure 24). ...

  • Humminbird ProAngler - page 19

    INSTALLATION CONTROL HEAD INSTALLATION Step Five - Assembling the Connector Holder 1. Insert the cabl e connectors into the connector holder. The cable connectors are labeled, and there are corresponding labels on the connector holder (Figure 26). The slots for the connectors are keyed to prevent reverse installation, so do not force the connector ...

  • Humminbird ProAngler - page 20

    INSTALLATION TEST THE INSTALLATION TEST THE INSTALLATION Testing should be performed with the boat in the water, however you can initially confirm basic operation with the boat trailered. Press POWER once to turn the unit on. There will be an audible chirp when any button is pressed to confirm the button press. If the unit does not power - up, ensu ...

  • Humminbird ProAngler - page 21

    AVAILABLE ACCESSORIES Humminbird offers a wide assortment of accessories which complement and expand the capability of your new ProAngler. These accessories are designed with the same high standards and are backed by the same one - year warranty. The Humminbird Accessory catalog included with your unit contains descriptions of the many accessories ...

  • Humminbird ProAngler - page 22

    The range of the graphic display is shown to the right of the graphic informatio n. The upper number is 0 indicating the surface of the water, the lower number is one of the 9 ranges available which best matches the depth of the water. As the depth of the water changes, the range changes as necessary in order to retain a bottom represe ntation onsc ...

  • Humminbird ProAngler - page 23

    Sonar targets which are not physically attached to the bottom may take one of many shapes. Surface clutter is the layer of water near the surface which is rich in algae and other growth, and often is aerated by wind or wave action. This area of water inter feres with sonar transmission and often appears on - screen as regular clusters of individual ...

  • Humminbird ProAngler - page 24

    CONTROL FUNCTIONS The ProAngler uses a simple 5 - button keypad for all user input. When any button is pressed, an audible "chirp" con firms the control input. In the event that a particular button has no function or is inappropriate for the situation, an audible "error", or multiple chirps, will be heard. POWER, powers the ProA ...

  • Humminbird ProAngler - page 25

    options, press and hold MENU - the menu will remain on - screen indefinitely. Once you release the menu button, the screen will time out. Once a menu times out, it is still considered the active menu. Pressing MENU will bring up the last used menu. The UP ARROW and DOWN ARROW make adjustments to menu functions. On the left side of every menu there ...

  • Humminbird ProAngler - page 26

    Menu Functions The Sensitivity function controls the sensitivity of the son ar receiver. The ProAngler automatically adjusts the level of receiver sensitivity based on a number of factors including the depth of the water and the level of noise present. Noise can be caused by other electronic devices, engines, trolling motors, prop eller cavitation ...

  • Humminbird ProAngler - page 27

    water, the 0 - 30' range would be selected). This provides the best display resolution and therefore the best target separation possible. The Depth Range can be adjusted manually. Press MENU repeatedly until the Depth Range menu is visible. The tw o options available are "Auto" (Factory Setting) and "Manual". Pressing the D ...

  • Humminbird ProAngler - page 28

    shown on the right side of the display. Zoom can either operate automatically, in which the Zoom range is constantly adjusted to show the bottom, or manually, in which the user controls t he location of the Zoom range. "Automatic" Zoom is especially helpful when looking for structure or bottom detail. The "Automatic" Zoom keeps ...

  • Humminbird ProAngler - page 29

    Depth Alarm The ProAngler contains an audible alarm to warn you of shallow water depths. The alarm is adjustable from 2' to 99' of depth. When the alarm is enabled, an audible alarm is sounded if the water beneath the boat is equal to or less than the selected alarm depth. Upon activation, the alarm sounds continuously for about 5 seconds ...

  • Humminbird ProAngler - page 30

    To disable the Fish Alarm, press MENU until the Fish Alarm menu appears onscreen. Use the UP ARROW to highlight "Off", and let the menu time out. Triplog Triplog provides a running log of information based on input from the Temp/Speed se nsor. Since Triplog requires information from the Temp/Speed sensor to operate, if this sensor is not ...

  • Humminbird ProAngler - page 31

    Press MENU unt il the Options menu is on - screen. There are two choices, Hide (Factory Setting) and Show. Use the DOWN ARROW to highlight Show and the first Options menu appears. Units The Units function allows the user to select the units of measurement for the speed r eadout. Both MPH or statute miles per hour and KTS or nautical miles per hour ...

  • Humminbird ProAngler - page 32

    Bottom Black The next Option menu is Bottom Black. There are two selections available; Off and On. The factory setting is Off. With this setting, the ProAngler displays the bottom using Structure ID. This allows the user to determine the texture or relative hardness of the bottom. Selecting Bottom Black "ON", will cause the unit to blacke ...

  • Humminbird ProAngler - page 33

    service. In conjunction with the failed indication will be a code which indicates to the repa ir personnel where the problem is. Press MENU to advance to the second Diagnostic screen. The second Diagnostic screen evaluates external connections to the unit. The first category is Transducer input. If a transducer is detected, a message will indicat e ...

メーカー Humminbird カテゴリー Fish Finder

Humminbird ProAnglerのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- ProAnglerの取扱説明書
- Humminbirdの製品カード
- パンフレット
- またはHumminbird ProAnglerの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Humminbird ProAnglerの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Humminbird ProAnglerの取り付け説明書、サービスマニュアル、簡易説明書、またはHumminbird ProAnglerのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Humminbird ProAnglerの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Humminbird ProAnglerデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがHumminbird ProAnglerを使用するのを助ける技術的文書のことです。説明書は通常、全てのHumminbird ProAnglerユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Humminbirdの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Humminbird ProAnglerの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははHumminbird ProAnglerの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Humminbird ProAnglerに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Humminbird ProAnglerデバイスの基本機能を使うにあたってのヒント。 Humminbird ProAnglerのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Humminbird ProAnglerに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるHumminbird ProAnglerのメーカー/サービスへの連絡先に関する情報。

Humminbird ProAnglerについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもHumminbird ProAnglerの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHumminbird ProAnglerで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)