-
ProSpot Fitness PC-1000 - page 1
Pno$PoWness rM Modet Pc-tooo Owners Manual 1) Assembly Instructions/Illustrations 2) Use and Operation of PnoSYor/itnessrM Product 3) Maintenance of your PnoSrory'tzessrM Product 4) Warranty Information 5) Parts List Serial#: ililil ililtililrilililil||il||il ilillililllililll 34504D00044PC-1000 ...
-
ProSpot Fitness PC-1000 - page 2
Table of Contents Assemblylnstructions. ..........1-5 Use and Operation of Your PROSPOUtnessrM Product...... .....,..........6-7 Periodic Maintenance of your PROSPOffrnessrM Product......................8 Warranty Information. .........9 Parts List.... ..... 10 ...
-
ProSpot Fitness PC-1000 - page 3
lnstructions for Assembly of the PROSPOTItnessrM PC-1000 . Before assembly, choose a safe location for your PROSPOFJitnessrM PC-1000. The PROSPOTlrressrM PC- '1000 has a footprint of approximately 6'x 6'. The barbell is approximately 7' long. Locate your PROSPOTlrressrM PC-'|000 away from any source of water. Do not allow a ...
-
ProSpot Fitness PC-1000 - page 4
7. Attach the two Rear Support Frames (4) to the two base rails (1 & 2) using four bolts (22), eight washers (18) and four nuts (20) as shown. HAND TIGHTEN the bolts at this time. 8. Attach the two Pulley Support Frames (17) to the Rear Support Frames (4) and the Upright Guide Posts (10 & 12) using eight bolts (28), sixteen washers (18) and ...
-
ProSpot Fitness PC-1000 - page 5
Upright Guidepost Assembly Diagram Left Locklng Stlder Rlght Locklng Stlder Bock vlevr --3-- ...
-
ProSpot Fitness PC-1000 - page 6
Assembly Drawing of PROSPOTfitnessrM PC-1000 2? * -4- ...
-
ProSpot Fitness PC-1000 - page 7
PROSP OTlitnessrM Model PC-l 000 #22 QTY:74 Bolts & Bushings Size Chart #29 #34 QTY:2 QTY:4 #35 QTY:4 @ M5 #78 QTY:84 #53 QTY:72 #20 QTY:42 #57 QTY:4 QrY:2 #56 #Bg QTY:2 ,/T QTY:8 9ff@ @ #28 QTY:8 = = Mt2 #36 8/76 mm M I 72,/24 mm 5/7O mm ...
-
ProSpot Fitness PC-1000 - page 8
!lRead!! This Page Before Using Your ProSpotJitnessrM Product Safe Use of Your ProSpotJitnessrM Product 1. CAUTION: This machine involves the risk of possible injury by its user. THE FOLLOWING RULES SHOULD BE CARFULLY FOLLOWED: 1) Consult a physician or other healthcare provider before beginning an exercise program. 2) If you are in bad health or a ...
-
ProSpot Fitness PC-1000 - page 9
2. 3. 5. 4. 1. 7. 11. Do not allow any liquid to be near the machine or spilled on any electrical part. Do not insert any foreign object into the electrical box or attempt to open it. lf you have any questions or need help refer to our web site at www.prospotfitness.com. Connect the power supply to a standard '110 volt grounded receptacle. lt ...
-
ProSpot Fitness PC-1000 - page 10
Maintenance of ProSpotJitnessru Product Intro: Our products are made of durable materials and have been factory tested to assur'e proper function and reliability. Along with our Equipment Warranty, this gives the owner of our product the confidence of a long lasting relationship with ProSpoftnesst* lnc. Our systems are designed in a way to all ...
-
ProSpot Fitness PC-1000 - page 11
Warrantv Information Each PnoSrorf/zessn Product comes with a limited parls replacement wananty. Please refer to the actual warranty card included with your system for specific coverage. If you have any questions about performance under this limited waranty, please write us at: PnoSrorlrze.ss, Inc. Attn: Warranty Service 1325 Oakbrook Drive, Suite ...
-
ProSpot Fitness PC-1000 - page 12
PROSPOTfirness rM Model PC-1000 Parts List 4 Rear Support Frame 2 Assy # I Description 1 Right Base Rail 2 Left Base Rail 3 Lower Cross Brace 5 Electronic Box Protecting Cover 6 Uplght Support Plate 7 Right Lo.cking Slider 9 Left Locl ing Slider 10 Right Upright Guide Post 12 Left Upright Guide Post 19 ; Electronic qox Lgcating Plate 14 Side Weight ...
-
ProSpot Fitness PC-1000 - page 13
HOW TO USE SPOT BLOCKS Using Spot Blocks is quick and easy. Just follow these instructions: To Use Spot Blocks as a Secondarv Lockinq Device 1. Before positioning Spot Blocks, place the barbell into the lowest position for the exercise you will be performing. 2. Once barbell is placed in desired position, lower Spot Blocks so that they are touching ...
-
ProSpot Fitness PC-1000 - page 14
ProSpot, Inc. Equipment Limited Warranty The ProSpot Pxxx (In Home) Series and Ee11g (Commercial) Series of Systems come with a limited parts warranty. This warranty does not cover misuse, neglect or abuse of the product, or damage due to an 'A.ct of Nature", weather, theft, improper installation and vandalism. All time periods are from t ...
-
ProSpot Fitness PC-1000 - page 15
Spot Block Position Number Decal Application Instructions I . Clean front face of Upright Guide Post. 2. Raise Weight Bar to highest position. 3. Position Spot Block at top position. 4. Remove backins on decal to exDose adhesive. 5. Apply decal starting at the bottom edge of Spot Bock in the center of the post. 6. Remove top layer of decal and smoo ...
ProSpot Fitness PC-1000についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもProSpot Fitness PC-1000の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがProSpot Fitness PC-1000で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。