-
Cisco Cisco Industrial Ethernet 3000 Series - page 1
G ETTING S TARTED G UIDE Cisco Catalyst Blade Sw itch 3000 Series for HP Getting Started Guide 1 About This Guide 2 T aking Out What Y ou Need 3 HP Blade System Arc hitecture 4 Installing the Switc h Module in the Blade Enclosure 5 Using the Onboard Administrator to Assign an IP Address to the S witc h Module and Ru nning Express Setu p 6 Managing ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 2
2 1 About This Guide This guide provides in structions on how to install your C isco Catalyst Blade Switch 3120 for H P or Cisco Catalyst Blade S witch 3020 for HP— referred to as the switch module —in the HP c-Class BladeSystem and how to set up and configure your switch module. The HP c-Class Bl adeSystem— referred to as the blade enclosure ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 3
3 2 Taking Out What You Need Follow these steps: 1. Unpack and remove the switch module and the accessory kit from the shipping box. 2. Return the packing material to the shipping container , and save it for future use. 3. V erify that you hav e received the items shown on p age 3. If any item is missing or damaged, contact your Cisco representativ ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 4
4 Cisco Switch Modu le Descriptions These sections describe the switch modules: • Cisco Catalyst Blade Switch 3120 for HP , page 4 • Cisco Catalyst Blade Switch 3020 for HP , page 6 The switch module is powered from the bla de enclos ure backplane. The switch module does not have a fan. The blade enclosure provides temperature management. The s ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 5
5 Figure 1 shows the Cisco C atalyst Blade Switch 3120 for HP switch module. Figur e 1 The Catalyst Blade Switc h 3120 f or HP 1 Switch module 8 LEDs for ports 19 and 20 2 UID 1 LED 1. UID: unit identifier. 9 Gigabit Ethernet uplink ports 23 to 26 3 Health LEDs 10 Gigabit Ethernet ports 19 and 20 or 10-Gigabit Ethernet slot 1 4 System status LEDs 1 ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 6
6 T able 1 describes the Cisco Catalyst Blade Switch 3120 for HP switch modu le ports. Each external port has an associated LED. Cisco Catalyst Blade Switch 3020 for HP The Cisco Catalyst Blade Switch 3020 for HP is a 24-Gigabit Ethernet port, Layer 2+ switch module. Sixteen of the Gigabit Ethernet ports are internal 1000BASE-X dow nlink port s tha ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 7
7 Figure 2 shows the Cisco C atalyst Blade Switch 3020 for HP switch module. Each external p ort has an associated LED. Figur e 2 The Catalyst Blade Switc h 3020 f or HP 1 Switch module 7 Health LED 2 Release latch 8 LEDs for SFP module ports 17 to 20 3 System status LEDs 9 SFP module ports 17 to 20 4 Mode button 10 LEDs for Gigabit Ethernet ports ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 8
8 T able 2 describes the switch module ports. Ea ch external port has an associa ted LED. T able 2 Cisco Catalyst Blade S witc h 3020 fo r HP P ort Descr iptions Port Description Ports 1 to 16 Internal Gigabit Ethernet 1000BA SE-X downlink ports. Ports 17 to 20 and Ports 17x to 20x Dual-purpose SFP module/RJ-45 copper Ethernet uplink ports. The SFP ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 9
9 3 HP Blade System Architecture Figure 3 shows the rear view of the blade enclos ure, in which you instal l the switch module. Figur e 3 Rear View of the Blade Enclosure 1 Blade enclosure rear view 7 Interconnect module bay 5 2 Blade enclosure fans 8 Interconnect module bay 6 3 Interconnect bay 1 with switch module install ed 9 Interconnect module ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 10
10 Consider these prerequisites before you install the switch module: • Fill any unoccupied interconn ect bays or any unoccupied power module ba ys in the blade enclosure with blanks. • Identify the b ays in which you will i nsert the switch modu les. Plan to install the first switch module in bay 1, the second in bay 2, and so on up to bay 8, ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 11
11 Follow these steps to install the switch module in the blade enclosure. The illustratio ns in this section show the Cisco Catalyst Blade Switch 3020 for HP switch module. The instructions are the same for the Cisco Catalyst Blade Switch 3120 for HP sw itch module. Step 1 If you have not already done so, touch the stat ic-protective p ackage that ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 12
12 Step 4 Ensure that the release latch on the switch module is in the open position (perpendicular to the module) : Step 5 Slide the switch module into the bay until it stops. (See Figure 5.) Figur e 5 Installing the Switc h Module into the Blade Enclosur e Inter connect Module Bay 1 Switch module release latch 153141 23x 24x 21x 24x 17x 18x 17x 2 ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 13
13 Step 6 Push the r elease latch on the front of the switch module to th e closed position. 5 Using the Onboard Administrato r to Assign an IP Address to the Switch Module and Running Express Setup For the switch module to obtain an IP addres s for the Fa0 interface thr ough the Onboard Administrator , these conditions must be met: • The blade e ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 14
14 Step 4 Using a PC that is conn ected to the same ne twork segment as the blade enclosure Onboa rd Administrator , access the Onboard Administrator in a browser window . Enter your assigned user name and password. Step 5 Choose Enclosure Information > Interconnect Bays to open the Interconnect Bay Summary window where you can find the assigned ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 15
15 Figur e 6 Expr ess Setu p P ag e fo r the Cisco Catalyst Blade Switc h 3120 f or HP Figur e 7 Expr ess Setu p P ag e fo r the Cisco Catalyst Blade Switc h 3020 f or HP Step 8 Go to “Using Express Setup” to finish setting up the switch module. ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 16
16 Using Express Setup Before you complete the setup program, obtain the default gateway IP address and the switch password from your system administra tor . Depe nding on w hether you are running Express Setup on a Cisco Catalyst Blade Switch 3120 for HP switch module or a Cisco Catalyst Blade Switch 3020 for HP switch module, you can configure th ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 17
17 Figure 8 A dv anced Settings T ab Step 2 In the Host Name field, enter a name for the switch m odule. The host name is limited to 31 characters; embedded space s are not allowed. Step 3 In the System Date and System T ime fields, enter the current date and time, or use the down arrows to select them. Step 4 In the Time Zone field, use the down a ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 18
18 Step 9 If you enable SNMP , you must enter a community string in the SNMP Re ad Community field, the SNMP W rite Community field , or both. SNMP communi ty strings authenticate access to MIB objects. Embedded spaces are not allowed in SNMP co mmunity strings. When you set the SNMP read community , you can access SNMP information , but you cannot ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 19
19 Step 6 Enter end . Step 7 Enter copy running-configuratio n startup-configuration to save this setting. Step 8 At the prompt, press Return . Step 9 T o verify that this switch is set as t he stack ma ster , en ter the show switch user EXEC command. For more information about creating switch stacks , see the “Plannin g and Creating a Switch Sta ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 20
20 Figur e 9 Device Manager P age f o r the Ci sco Catalyst Blade Switc h 3120 for HP ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 21
21 Figur e 1 0 Device Manager P age f or the Cisco Catalyst Blade Switc h 3020 for HP Step 3 Use the device manager to perform basic switch module configuration and mo nitoring. See the device manager online help for more information. Step 4 For more advanced configuration, download and run the Cisco Network Assistant, which is described in the nex ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 22
22 Step 3 Configure the PC terminal emulation software for: – 9600 baud – 8 data bits – No parity – 1 stop bit – No flow control Step 4 Use the CLI to enter commands to config ure the switch module. See the software configuration guide a nd the command reference for more information. Using the Onboard Administrator CLI See the HP BladeSys ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 23
23 7 Planning and Creating a Switch Stack (Only the Cisco Catalyst Blade Switch 3120 for HP) A switch stack is a set of up to nine stacking-capab le switch modules that are connected through their StackWise Plus ports. One of the switches controls the operation of the sta ck and is called the stack master . The stack master and the other switches i ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 24
24 – CAB-STK-E-0.5M= (0.5-meter cable) – CAB-STK-E-1M= (1-meter cable) – CAB-STK-E-3M= (3-meter cable) For switch module dimensions and additional stacking guidelines, see the switch module hardware installation guide. For concepts and procedures to manage switch stacks , see the switch module software confi guration guide an d the stack comp ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 25
25 Step 3 Insert the cable into the S tackWis e Plus port on the front panel of the switch. Insert the other end of the cable into the connector of the other sw itch. Always use a Cisco-approved S tackWise Plus cable to connect the switches. Figure 1 1 Inserting the StackWise Plus Cables When you remo ve the StackWise Plus cables from th e connecto ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 26
26 The autonegotiation feature is enabled by defaul t on the switch. At this setting, the switch module ports configure themselves to operate at the speed of at tached devices. If th e attached device does not support autonegotiation, you can explicitly set the switch module port speed and the duplex parameters. T o maximize performanc e, either al ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 27
27 Verify Port Connectivity After you connect a device to the switch module port, the port LED turns a mber while the switch module establishes a link. This process takes about 3 0 seconds. Then the LED turns green when the switch module and the a ttached device have an estab lished link. If the LED is off, the device might not be turned on, there ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 28
28 Accessing Help Online First look for a solution to your problem in the tr oubleshooting section of the hardware installation guide or software configuration guide for your swit ch module on Cisco.com. Y ou can also access the Cisco T echnical Support and Documentation website for a list of known hardware problems and extensive troubleshooting do ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 29
29 10 Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitti ng a service request, and gathering additional information, see the monthly What’ s New in Cisco Product Documentation , which also lists all new and revised Cisco technical documentation, at: http://www .cisco.com/en/US/docs/genera ...
-
Cisco Cisco Industrial Ethernet 3000 Series - page 30
Americas Headquarte rs Cisco Systems, I nc. 170 W est T asman Drive San Jose, CA 95 134-1706 USA www .cisc o.com T el: 40 8 526-4000 800 553-NETS (63 87) Fax: 408 527-0883 Asia Pacific Headquarters Cisco Systems, Inc. 168 Robinson Road #28-01 Capital T ower Singapore 068912 www .cisc o.com T el: +65 6317 777 7 Fax: +65 6317 779 9 Europe Headquarter ...
Cisco Cisco Industrial Ethernet 3000 Seriesについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもCisco Cisco Industrial Ethernet 3000 Seriesの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCisco Cisco Industrial Ethernet 3000 Seriesで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。