-
Harbor Freight Tools 69054 - page 1
Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2012 by Harbor Freight T ools ® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight T ools. Diagrams ...
-
Harbor Freight Tools 69054 - page 2
Page 2 For technical questions, please call 1-800-444-3353. Item 69054 T able of Contents Safety ......................................................... 2 Specifications ............................................. 3 Setup .......................................................... 3 Parts List and Diagram .............................. 10 W arra ...
-
Harbor Freight Tools 69054 - page 3
Page 3 For technical questions, please call 1-800-444-3353. Item 69054 Specifications T op Shelf Weight Capacity 250 lb. Drawer Weight Capacity 25 lb. (per drawer) Bottom Shelf Capacity 200 lb. Vise Capacity 7" T able T op Thickness 2-1/2" Setup - Before Use: Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this ...
-
Harbor Freight Tools 69054 - page 4
Page 4 For technical questions, please call 1-800-444-3353. Item 69054 3. Once both Legs have been fastened to the Cross Brace, slide the Shelf (2) above against the Legs so that the far edge fits onto the groove on the Cross Brace. See Figure C, right. 4. While your assistant is holding the Shelf in place against the first Cross Brace, set the sec ...
-
Harbor Freight Tools 69054 - page 5
Page 5 For technical questions, please call 1-800-444-3353. Item 69054 6. Set the Sliding Partition (14) into place by inserting the tabs at the end of the Partition into the holes at the center of the T able T op’ s underside. See Figure F , right. Note: V erify that the Sliding Partition and T able T op face the same direction. See Figure G, ri ...
-
Harbor Freight Tools 69054 - page 6
Page 6 For technical questions, please call 1-800-444-3353. Item 69054 9. Use the Hex Wrench and Screws (6) to fasten the tops of the Legs to the T able T op underside. See Figure I, right. 10. Use the Hex Wrench and Screws (13) to fasten the sides of the Legs to the T able T op underside. See Figure J, right. Note: There are no pilot holes availab ...
-
Harbor Freight Tools 69054 - page 7
Page 7 For technical questions, please call 1-800-444-3353. Item 69054 12. Once the ends of the Lower Support have been fastened to the Legs, use the Screws (6) to fasten the middle of the Lower Support to the top of the Sliding Partition. See Figure L, right. 13. With assistance, set the assembled frame right-side up and in the spot where you want ...
-
Harbor Freight Tools 69054 - page 8
Page 8 For technical questions, please call 1-800-444-3353. Item 69054 17. Use the Drawer Screws (22) to fasten the Drawer Handles (21) to the Drawer Front Panels (16). See Figure O, right. Note: Each Drawer piece should have a sticker designating what it is (P1-P5). Use the Parts List as on page 10 as reference. This will help assure correct assem ...
-
Harbor Freight Tools 69054 - page 9
Page 9 For technical questions, please call 1-800-444-3353. Item 69054 20. Fasten Drawer Bottom to Drawer Pack Panel. Once Drawers are fully assembled, verify that the inside tracks along the Sliding Partition are pushed forward. See Figure R, right. 21. Slide Drawers into tracks along Sliding Partition and insides of the Legs. See Figure S, right. ...
-
Harbor Freight Tools 69054 - page 10
Page 10 For technical questions, please call 1-800-444-3353. Item 69054 Part Description Qty 1 T able T op 1 2 Shelf 1 3 Cross Brace 2 4 Leg 2 5 Vise 1 6 Screw (50mm) 6 7 Bolt (60mm) 8 8 Connecting Nut 8 9 Hex Wrench (50mm) 1 10 Wood Peg 4 11 Anvil Peg 4 Part Description Qty 12 Vise Screw and W asher 1 13 Screw 58 14 Sliding Partition 1 15 Lower Su ...
-
Harbor Freight Tools 69054 - page 11
Page 1 1 For technical questions, please call 1-800-444-3353. Item 69054 Assembly Diagram T able T op (1) Shelf (2) Cross Brace (3) Leg (4) Vise (5) Screw (50mm) (6) Bolt (60mm) (7) Connecting Nut (8) Hex Wrench (50 mm) (9) Wood Peg (10) Anvil Peg (1 1) Screw and W asher (W asher not shown) (12) Screw (13) Sliding Partition (14) Lower Support (15) ...
-
Harbor Freight Tools 69054 - page 12
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 9301 1 • (800) 444-3353 Limited 90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of ...
Harbor Freight Tools 69054についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもHarbor Freight Tools 69054の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHarbor Freight Tools 69054で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。