Keystone Computer Keyboardの取扱説明書

38ページ 4.29 mb
ダウンロード

ページに移動 of 38

Summary
  • Keystone Computer Keyboard - page 1

    TimeMed Labeling Systems, Inc. 144 Tower Drive Burr Ridge, IL 60527 Phone: 800-323-4840 Fax: 800-548-5359 www.TimeMed.com Keystone™ Labeling System Instruction Manual ...

  • Keystone Computer Keyboard - page 2

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 2 Keystone ™ User Manual Getting started with the TimeMed ® Keystone ™ Labeling System T ABLE OF CONTENTS P AGE A. Unpacking Keystone ............................................................................................................... 3 B. Loading ...

  • Keystone Computer Keyboard - page 3

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 3 A. UNP ACKING KEYSTONE After removing the printer from the packaging material, check the contents. The following items should be included: • Thermal printer • Power cord for thermal printer • Sample roll of labels (HCP-TD-1 15-Y) • Keystone u ...

  • Keystone Computer Keyboard - page 4

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 4 B. LOADING THE LABEL MEDIA Load label media into the printer as follows: • Open the media cover and lower the Media Hub Guide and Media Guide. • Press in on the Printhead Latch and raise the Printhead Assembly . 1. Printhead Latch 2. Media Guide 3. Me ...

  • Keystone Computer Keyboard - page 5

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 5 • Slide the Roll Media onto the Media Hub and raise the Media Hub Guide. The Media Hub Guide should be pushed inward so that it is just touching the Roll Media. • Route the Media through the printer as shown. Raise the Media Guide. The Media Guide shou ...

  • Keystone Computer Keyboard - page 6

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 6 • With label media loaded, grasp the Slide T ab and move the Sensor Eye Mark into the center position over label media. 1. ‘Sensor Eye’ Mark 2. Slide T ab C. EQUIPMENT SERVICE COVERAGE Equipment Service/Support TimeMed has access to an extensive networ ...

  • Keystone Computer Keyboard - page 7

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 7 The customer will not have to cover the cost of travel and labor related to the service call. Replacement parts will be provided at no charge except for those parts which by their nature are considered consumable (example: ribbons, paper , printheads, etc). Main ...

  • Keystone Computer Keyboard - page 8

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 8 Returns If necessary , Keystone products may be returned for credit within 30 days from date of invoice. Returned stock products will be subject to a 20% handling/restocking charge. Shipping costs are the responsibility of the customer . Stock products that are ...

  • Keystone Computer Keyboard - page 9

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 9 Y ou will be required to restart your PC when the program installation has completed. The program will not function correctly until your PC has re-started. Insert the CD into your CD-ROM drive. The install program should run automatically – if it does not, cli ...

  • Keystone Computer Keyboard - page 10

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 10 Click on “Next” to continue Click on “I accept the terms of the license agreement” to continue ...

  • Keystone Computer Keyboard - page 11

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 11 T ype in the appropriate User and Company Names and click on “Next” to continue Select “English (United States)” from the drop down menu, click on “Next” to continue ...

  • Keystone Computer Keyboard - page 12

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 12 Using the drop down menu, select the appropriate printer model (Select the model: M-4206) and click “Next” to continue Click on “Next” to continue for the software to be installed in the default directory ...

  • Keystone Computer Keyboard - page 13

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 13 Click “Install” to begin the installation process When the software installation has completed, click on “Finish” to exit When the program installation has nished you will be prompted to restart your PC. IMPORT ANT : The program will not function cor ...

  • Keystone Computer Keyboard - page 14

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 14 RUNNING THE PROGRAM: Double-click on the Solo Studio icon to run the program or click on the Windows Start Menu and select Program>Solo Studio. Detailed information on the features of the program can be found under Help>Help T opics. E. CONNECTING THE KE ...

  • Keystone Computer Keyboard - page 15

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 15 re-check the physical cable connections between the keyboard and the PC. Also re-check the COM port settings: Click on the menu bar on the top section of the program and select Keyboard>Keyboard settings and check that the correct COM port is selected. Click ...

  • Keystone Computer Keyboard - page 16

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 16 Keyboard and the PC (COM 2) BAUD: 57,600 P ARITY : NONE DA T A BIT : 8 ST OP BIT : 1 SHAKE: XON/XOFF Keyboard Internal DIP switches Default Datamax M-Class/Z: Both switches are set toward the connector cord Datamax I-Class: Both switches should be set away fro ...

  • Keystone Computer Keyboard - page 17

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 17 F . CONNECTING TO A DA T ABASE (OPTION 1 - MICROSOFT EXCEL) 1. Ensure that your data is in an Excel Spreadsheet format, as shown below . RECORD # DESCRIPTION BARCODE # 123456 COTTON BALLS 12345678 654321 TRA Y C SECTION 87654321 9876543 SYRINGE 10ML 98765432 Gi ...

  • Keystone Computer Keyboard - page 18

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 18 Select “Sheet 1$” Click the check box for “First Row Contains Field Names” Select “Record #” as the eld that uniquely identies each database table row . Notice that “Select Record” will be the database prompt. Click on Finish button to co ...

  • Keystone Computer Keyboard - page 19

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 19 F . CONNECTING TO A DA T ABASE (OPTION 2 - MICROSOFT ACCESS) 1. T o set up a new database in Access, an easy method is to rst create your data in an Excel Spreadsheet format (as shown below) and export the spreadsheet into Access. RECORD # DESCRIPTION BARCOD ...

  • Keystone Computer Keyboard - page 20

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 20 • Y ou will now be given the choice to select the primary key , check the “Choose my own Primary Key” option and select “Record #” as the drop down option, click on “Next” • Select an appropriate name for the T able and click on “Finish ...

  • Keystone Computer Keyboard - page 21

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 21 Select “Record #” as the eld that uniquely identies each database table row . Notice that “Select Record” will be the database prompt. Click on Finish button to complete the database connection process. Y ou have now connected your database to the ...

  • Keystone Computer Keyboard - page 22

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 22 G. SETTING UP THE LABELS/BUILDING THE LABEL TEMPLA TE T imeMed’s Keystone product comes pre-installed with T imeMed label formats (20 different formats) and application specic T imeMed label templates (7 different templates) for your convenience. T o choo ...

  • Keystone Computer Keyboard - page 23

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 23 T o select a different label size, you can change the “Stock Settings” on the right. Click on “Change” and you will be offered a selection of dif ferent label choices to select. Click on “OK” when you are done. ...

  • Keystone Computer Keyboard - page 24

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 24 T o verify that the appropriate label type (Direct Thermal/Thermal T ransfer) has been selected in the software, check your printer ’s settings under Settings > Printer . Ensure that the printer model matches the printer you are using (M-4206). Make sure ...

  • Keystone Computer Keyboard - page 25

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 25 There are 3 different options to map each data element (text or barcode): Fixed Data – The information printed will always be the same Keyboard – User input is required by typing on the keyboard Database – The data will come from the database based on the ...

  • Keystone Computer Keyboard - page 26

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 26 Map a BARCODE label element to a Database Field 1. Click on the BARCODE element. 2. Map this barcode label element to the Source T ype of “Database” and Field of “Barcode”. 3. The default barcodes used are Code 39. Y ou also have the option to create b ...

  • Keystone Computer Keyboard - page 27

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 27 Map a Label element using the Keyboard User Input Y ou can also setup a label format to prompt the user to manually input data with the keyboard. This can be used for expiration dating when user intervention is required to complete the information (TM LBL 4 fro ...

  • Keystone Computer Keyboard - page 28

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 28 Other Label Setup Options Y ou can also select the label size manually . T o set the label size to match the labels you have loaded into your printer , click on or go to Stock > Select... Look for a label format matching your label dimensions (select 1.5” ...

  • Keystone Computer Keyboard - page 29

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 29 Map a BARCODE label element to a Database Field 1. Click on the BARCODE icon on the left toolbar to add a barcode label element. The “Select Barcode T ype” dialog will pop up. Select the appropriate barcode type and click OK to close the dialog. Under the b ...

  • Keystone Computer Keyboard - page 30

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 30 H. TRANSFERRING LABELS TO THE KEYBOARD Y our labels can be transferred to the keyboard at any time by selecting Keyboard > Keyboard Builder or by clicking on the Keyboard Builder which will show a list of all the labels you have saved on your PC. Check all ...

  • Keystone Computer Keyboard - page 31

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 31 Y ou will now be prompted to enter the record you wish to call up. Enter the desired record # and press the enter key . The keyboard will not prompt you for the number of labels you wish to print. Enter the number of labels required and press the Enter key . Y ...

  • Keystone Computer Keyboard - page 32

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 32 J. FREQUENTL Y ASKED QUESTIONS AND TROUBLESHOOTING TIPS Q. I am not able to install the label software on my computer , the screen says to contact my IT department. A. Make sure that the software is installed on a computer with “Administrator rights”. Admi ...

  • Keystone Computer Keyboard - page 33

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 33 PC and Program Settings Click on the menu and select Keyboard>Keyboard settings and check that the correct COM port is selected. Click on the “Settings” button and verify that the following settings are correct and Click on the OK button: Baud rate: 57,6 ...

  • Keystone Computer Keyboard - page 34

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 34 Y ou will now be back at the main menu. Press the “Menu” button once. Using the “Down arrow” button, scroll down to the “Communications” option and press the “Enter” button once. The “Serial Port A” option will be highlighted, press the “ ...

  • Keystone Computer Keyboard - page 35

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 35 K. REFERENCE INFORMA TION: IMPORT ANT : the communication settings MUST BE IDENTICAL between: • The keyboard and the printer • The keyboard and the PC The communication settings on the keyboard can be accessed by pressing the “Exit” button which w ...

  • Keystone Computer Keyboard - page 36

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 36 Communication settings on the PC: Click on the menu bar on the top section of the program and select Keyboard>Keyboard settings and check that the correct COM port is selected. Click on the “Settings” button and verify that the following settings are co ...

  • Keystone Computer Keyboard - page 37

    For technical support, please call: 800-323-4840 ext. 290 (M - F 8 a.m. to 5 p.m CST) 37 Cleaning the Printhead If print quality declines (symptoms include non-compliant bar codes, print dropouts, and streaks; see sample label below), the typical cause is debris build-up on the printhead. Furthermore, when the build-up is not removed it may lead to ...

  • Keystone Computer Keyboard - page 38

    TimeMed Labeling Systems, Inc. - Call Toll Free: 800-323-4840 or visit www.timemed.com 38 TimeMed Labeling Systems, Inc. 144 Tower Drive Burr Ridge, IL 60527 Phone: 800-323-4840 Fax: 800-548-5359 www.TimeMed.com ...

メーカー Keystone カテゴリー Computer Keyboard

Keystone Computer Keyboardのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- Computer Keyboardの取扱説明書
- Keystoneの製品カード
- パンフレット
- またはKeystone Computer Keyboardの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Keystone Computer Keyboardの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Keystone Computer Keyboardの取り付け説明書、サービスマニュアル、簡易説明書、またはKeystone Computer Keyboardのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Keystone Computer Keyboardの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Keystone Computer Keyboardデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがKeystone Computer Keyboardを使用するのを助ける技術的文書のことです。説明書は通常、全てのKeystone Computer Keyboardユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Keystoneの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Keystone Computer Keyboardの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははKeystone Computer Keyboardの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Keystone Computer Keyboardに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Keystone Computer Keyboardデバイスの基本機能を使うにあたってのヒント。 Keystone Computer Keyboardのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Keystone Computer Keyboardに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるKeystone Computer Keyboardのメーカー/サービスへの連絡先に関する情報。

Keystone Computer Keyboardについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもKeystone Computer Keyboardの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがKeystone Computer Keyboardで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)