JVC HR-E639EEの取扱説明書

34ページ 1.12 mb
ダウンロード

ページに移動 of 34

Summary
  • JVC HR-E639EE - page 1

    ENGLISH ČESKY POLSKI The recorder illustrations appearing in this instruction manual are of the HR-E639EE. Na ilustracích v tomto návodu je zobrazen videorekordér HR-E639EE. Ilustracje odtwarzacza przedstawione w niniejszej instrukcji dotyczą HR-E639EE. (Hi-Fi) (V ysoká věrnost reprodukce - Hi-Fi) (Hi-Fi) (Monaural) (Monofonní) (Monofoniczn ...

  • JVC HR-E639EE - page 2

    2 EN SAFETY FIRST Safety Precautions The rating plate and the safety caution are on the rear of the unit. W ARNING: DANGEROUS VOL T AGE INSIDE W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. A TTENTION 1. This recorder can also receive SECAM colour television signals for recording and playback. 2. Recordings ...

  • JVC HR-E639EE - page 3

    EN 3 Basic Connections CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in “Specifications” ( Z pg. 33). SITUA TE RECORDER 2 Place the recorder on a stable, horizontal surface. CONNECT RECORDER TO TV 3 The connection method you use depends on the type of TV you have. RF CONNECTION ● T o Connect T o A TV With NO A ...

  • JVC HR-E639EE - page 4

    4 EN INST ALLING YOUR NEW RECORDER (cont.) Select T elevi- sion System SET SYSTEM SWITCH 1 Set to the appropriate position depending on your TV system. (Refer to the chart on the left.) NOTES: ● If no colours appear on the screen when using a multi-system television with its system select switch set to AUT O, change the switch position to corresp ...

  • JVC HR-E639EE - page 5

    EN 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 On-Screen Displays Y ou can choose whether or not to have various operational indicators appear on screen, by setting this function ON or OFF . Messages appear in the language you select. Use the buttons on the remote control for this procedure. The superimpose ...

  • JVC HR-E639EE - page 6

    6 EN T uner Set INITIAL SETTINGS (cont.) Y our recorder needs to memorise all necessary stations in channel positions in order to record TV programmes. Once stored, you can call them up with the TV PROG. buttons without going through any vacant channels. SEARCH/STORE DELETE FINE TUNING [TV PROG 5 ∞ ] = [CANCEL] :EXIT BAND SELECT VHF L VHF H UHF [ ...

  • JVC HR-E639EE - page 7

    EN 7 SELECT POSITION 6 T urn the TV PROG. dial until an open position in which you want to store a channel appears, then press OK . STORE CHANNEL 7 If fine tuning is not necessary , simply press STORE . For fine tuning adjustment, turn the TV PROG. dial until the picture becomes clearer , then press STORE . ● T o continue Auto Channel Sear ch, tu ...

  • JVC HR-E639EE - page 8

    8 EN INITIAL SETTINGS (cont.) Fine-T uning Channels Already Stored TURN ON THE RECORDER 1 Press OPERA TE . ACCESS CHANNEL SET MODE SELECT SCREEN 2 Press and hold CH SET for more than 2 seconds. The Channel Set Mode Select screen appears. SELECT MODE 3 T urn the TV PROG. dial to place the pointer next to "FINE TUNING", then press OK . SELE ...

  • JVC HR-E639EE - page 9

    EN 9 Clock Set TURN ON THE RECORDER 1 Press OPERA TE . ACCESS MODE SELECT SCREEN 2 Press CLOCK . SELECT MODE 3 Press TV PROG. 5 / ∞ to place the pointer next to "CLOCK SET", then press OK . The Clock Set screen appears. SET TIME 4 Use NUMBER key "1( 5 )" or "4( ∞ )" to set the time. ● Press and hold either button ...

  • JVC HR-E639EE - page 10

    10 EN PLA YBACK Basic Playback The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme. LOAD A CASSETTE 1 Make sure the window side is up, the rear label side is facing you and the arrow on the fro ...

  • JVC HR-E639EE - page 11

    EN 11 Playback Features Slow Motion ACTIV A TE SLOW-MOTION PLA YBACK 1 During playback or still, turn the SHUTTLE ring to the right for forward slow motion, or to the left for reverse slow motion (refer to the illustration to the left). OR During still picture, press and hold P AUSE for 2 seconds, then release. Press and release again to return to ...

  • JVC HR-E639EE - page 12

    12 EN PLA YBACK (cont.) Manual T racking Y our video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG . button. OVERRIDE AUTOMA TIC TRACKING 1 Press SP/LP/EP ( ) on the remote to engage manual tracking. ADJUST TRACKING MANUALL Y 2 Press TV PROG . 5 ...

  • JVC HR-E639EE - page 13

    EN 13 Index Search Y our recorder automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction. NOTE: Before starting, make sure the recorder is in the Stop mode. £ 2 ACTIV A TE INDEX SEARCH 1 Press PUSH JOG or ( ™ or £ ). “ ™ 1” or “ £ 1” is ...

  • JVC HR-E639EE - page 14

    14 EN PLA YBACK (cont.) This function helps you check contents of unlabeled recorded tapes at the touch of a single button. NOTE: Scene Finder cannot be used when the recorder is in the Record mode. FF REW FF REW FF REW Search Search Search Scene Finder 10 minutes on counter 5 seconds 10 minutes on counter 5 seconds 5 seconds ACTIV A TE SCENE FINDE ...

  • JVC HR-E639EE - page 15

    EN 15 T ape Position Indicator The tape position indicator appears on screen when, from the Stop mode, you press FF , REW or perform an Index Search. The position of “ 5 ” in relation to “0” (beginning) or “+” (end) shows you where you are on the tape. ”O.S.D.” ( Z pg. 5) must be set to “ON”, or the indicator will not appear . N ...

  • JVC HR-E639EE - page 16

    16 EN TV signals being received by the recorder ’ s built-in tuner can be recorded onto a video tape. Y ou can “capture” a TV programme using your video recorder . RECORDING Basic Recording T urn on the TV and select the VIDEO channel (or A V mode). 12 45 3 6 8 0 7 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ...

  • JVC HR-E639EE - page 17

    EN 17 Record One Pr ogramme While W atching Another SELECT CHANNEL TO W A TCH 1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view . ● The programme selected with the TV’ s channel controls appears on the TV screen while the one selected with the TV PROG . button(s) is rec ...

  • JVC HR-E639EE - page 18

    18 EN 12 45 3 6 8 0 7 9 RECORDING (cont.) B.E.S.T . Picture System The B.E.S.T . (Biconditional Equalised Signal T racking) system checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures. The default setting is "ON". 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ...

  • JVC HR-E639EE - page 19

    EN 19 12 45 3 6 8 0 7 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PAUSE RECORD NOTES: ● The B.E.S.T . system works for SP and LP (or EP) modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording. ● In the case of timer recording, the B.E.S.T . sy ...

  • JVC HR-E639EE - page 20

    20 EN TIMER RECORDING Timer Pr ogramming Before performing the following steps: ● Insert a cassette with the safety tab in place. The recorder will come on automatically . ● T urn on the TV and select the VIDEO channel (or A V mode). ● Select the appropriate colour system by pressing the COLOUR SYSTEM button.( Z pg. 24) Remember , the clock m ...

  • JVC HR-E639EE - page 21

    EN 21 ENTER CHANNEL POSITION 6 Press TV PROG. 5 / ∞ to select the channel you wish to record. SET T APE SPEED 7 Press SP/LP/EP to set the tape speed. ● For each additional programme, press PROG. and repeat steps 3 – 7 . RETURN TO NORMAL SCREEN 8 Press PROG. as many times as necessary to return to normal screen. ENGAGE RECORDER’S TIMER MODE ...

  • JVC HR-E639EE - page 22

    22 EN EDITING Edit T o Or Fr om Another V ideo Recorder Y ou can use your video recorder as the sour ce player or the recording deck. MAKE CONNECTIONS 1 Connect the player ’ s AUDIO/VIDEO OUT connector to the recorder’s AUDIO/VIDEO IN connector . For HR-E639EE Owners . . . ● When connecting to a monaural recorder , connect your recorder' ...

  • JVC HR-E639EE - page 23

    EN 23 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Y ou can use a camcorder as the sour ce player and your video recorder as the recorder . Edit Fr om A Camcorder MAKE CONNECTIONS 1 Connect the camcorder’s AUDIO/VIDEO OUT connectors to the recorder ’ s front panel AUDIO/VIDEO input connectors. For HR-E639E ...

  • JVC HR-E639EE - page 24

    24 EN AUTO NTSC 3.58 NTSC 4.43 NTSC PAL*  PAL MESECAM COLOUR SYSTEM INFORMA TION ON MUL TI-SYSTEM COMP A TIBILITY Setting Of The Colour System Select Buttons Use the COLOUR SYSTEM button on the recorder's front panel to select the colour system. Pressing this button changes the mode as illustrated on the left. The On-Screen display wi ...

  • JVC HR-E639EE - page 25

    EN 25 Playback This recorder can play back all 3 types of recorded tape. VIDEO OUT AUDIO OUT RF OUT NTSC 4.43 MHz NTSC PAL MESECAM PAL MESECAM NTSC [ PAL NTSC 3.58 MHz PAL SECAM NTSC 3.58  NTSC 4.43 PAL (B/G, D/K)  Recorded tape Playback circuit Manual switching Manual switching Built-in RFconverter G, K Multi-system receiver M ...

  • JVC HR-E639EE - page 26

    26 EN Y our remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer ’ s TVs can also be controlled by setting the appropriate switch on the remote control. Before you start . . . ● T urn on the TV using its remote control. ● Set the remote control’ s TV/VCR switch to TV . NOTE: If your TV is ...

  • JVC HR-E639EE - page 27

    EN 27 TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair . POSSIBLE CAUSE ● The mains power cord is discon- nected. ● “TIMER“ is displayed on the disp ...

  • JVC HR-E639EE - page 28

    28 EN TROUBLESHOOTING (cont.) RECORDING CORRECTIVE ACTION Insert a cassette, or using adhesive tape, reseal the slot where the tab was removed. Set to the desired channel. Confirm that the source is properly connected. Confirm that all units’ power switches are turned on. Set the input mode to “AU”. Confirm that the camcorder is properly conn ...

  • JVC HR-E639EE - page 29

    EN 29 QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the video recorder indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads. Q. During search, slow , still and frame-by-fra ...

  • JVC HR-E639EE - page 30

    30 EN INDEX Open the lid to access covered connectors and buttons. REW FF OPERATE TIMER TV PROG./ JOG SHUTTLE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 VIDEO COLOUR SYSTEM (MONO) L–AUDIO–R RENTAL RETURN CH SET STORE OK WIDE QUALITY AUTO SP/LP TIMER SCENE FINDER REC TIMER PLAY NTSC M SP LP ...

  • JVC HR-E639EE - page 31

    EN 31 DISPLA Y P ANEL REC TIMER PLAY NTSC M SP LP +8 4 0 6 10 –20dB NORM L R 90 7 6 3 4 5 2 1 8 1 B.E.S.T . Picture System Display* ( Z pg. 18) Audio Level Indicator* 2 PLA Y Indicator ( Z pg. 10) 3 REC[ORD] Indicator ( Z pg. 16) 4 NTSC Indicator ( Z pg. 24) 5 T ape Speed Indicator ( Z pg. 16) * A vailable with HR-E639EE only . 6 Audio Mode Indic ...

  • JVC HR-E639EE - page 32

    32 EN S C E N E F I N D E R D I S P L A Y OPERATE PROG. PLAY STOP CLOCK DAILY (M-F) AUX C.RESET CANCEL TV VOL. TV PROG. TV/VIDEO TV VCR TIMER WEEKLY A 12 45 3 6 8 0 7 9 B MULTI BRAND REMOTE CONTROL UNIT REW REC FF PAUSE PUSH JOG START STOP DATE O K / C . M E M O R Y T V V O L . 2 1 7 8 @ ! # t r i o 3 ( u y ) ^ * w e 6 0 9 % $ p & 4 5 ...

  • JVC HR-E639EE - page 33

    EN 33 GENERAL Power requirement Rating : AC 1 10 – 240 V ` , 50/60 Hz Operating : AC 90 – 260 V ` , 50/60 Hz Power consumption : 24 W (E639EE) 20 W (E539EE) T emperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 426 x 94 x 341 mm W eight : 4.5 kg Format : VHS standard Maximum ...

  • JVC HR-E639EE - page 34

    HR-E639/539EE COPYRIGHT © 1996 VICTOR COMPANY OF JAPAN, LTD. VICTOR COMP ANY OF JAPAN, LIMITED EE Printed in Japan 1096YOV * UN * VP ...

メーカー JVC カテゴリー VCR

JVC HR-E639EEのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- HR-E639EEの取扱説明書
- JVCの製品カード
- パンフレット
- またはJVC HR-E639EEの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、JVC HR-E639EEの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、JVC HR-E639EEの取り付け説明書、サービスマニュアル、簡易説明書、またはJVC HR-E639EEのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、JVC HR-E639EEの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

JVC HR-E639EEデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJVC HR-E639EEを使用するのを助ける技術的文書のことです。説明書は通常、全てのJVC HR-E639EEユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

JVCの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. JVC HR-E639EEの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJVC HR-E639EEの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。JVC HR-E639EEに関してこのドキュメントで見つけることができる全てのヒントの目次
3. JVC HR-E639EEデバイスの基本機能を使うにあたってのヒント。 JVC HR-E639EEのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。JVC HR-E639EEに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJVC HR-E639EEのメーカー/サービスへの連絡先に関する情報。

JVC HR-E639EEについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもJVC HR-E639EEの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJVC HR-E639EEで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)