-
Sharp CD-PC3500 - page 1
OPERATION MANUAL FOR YOUR RE CORDS For your assistance in reporting this unit in case of loss or theft, please record below the model number and serial number which are located on the rear of the unit. P l e a s e r e t a i n t h i s i n f o r m a t i o n . Model number _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Serial number _ _ _ ...
-
Sharp CD-PC3500 - page 2
IMPORT ANT SAFEGUARDS CAUTION All t he safety and op er ating in str uc tions sho uld be read before the appliance is operated, and should be retained for future reference. Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. Improper use can result in potential electri- ...
-
Sharp CD-PC3500 - page 3
<P=002> INTRODUCTION Thank you for purchasing this SHARP product. To obtai n th e bes t pe rf ormanc e fro m th is p rod uct, p lease read this manu al ca ref ul ly . It will guide you in operating your SHARP product. CONTENTS Page ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 SPECIAL NOTES . . . . . . . . . ...
-
Sharp CD-PC3500 - page 4
<P=003> PRECAUTIONS ■ General ● Please make sure that the unit is positioned in a well ven- tilated area and that there is at least 4" (10 cm) of free space along the sides and back. There must also be a minimum of 8" (20 cm) of free space on the top of the unit. ● Do not use oil, solvents, gasoline, paint thinners or insec- t ...
-
Sharp CD-PC3500 - page 5
<P=004> NAMES OF CONTROLS AND INDICA TORS 1 67 8 9 2 4 51 1 12 13 14 16 17 18 3 3 15 10 43 42 ■ Front panel 1 1. (CD) Disc Tray 1 2. Extra Bass Indicator 1 3. Spectrum Analyzer/Volume Level Indicator 1 4. (CD) Disc Number Indicators 1 5. (CD/TUNER) Memory Indicator 1 6. (TAPE 2) Record Indicator 1 7. (CD) Play Indicator 1 8. (CD) Music Sche ...
-
Sharp CD-PC3500 - page 6
<P=005> (Continued) ■ Rear panel 1 1. AC Power Cord 1 2. CD Digital Output Jack 1 3. FM/AM Loop Antenna Jack 1 4. Subwoofer Output Jack 1 5. Video/Auxiliary (Audio Signal) Input Jacks 1 6. Front Speaker Terminals 1 7. Center Speaker Terminals 1 8. Rear Speaker Terminals ■ Front speaker 1 1. Super Tweeter 1 2. Tweeter 1 3. Woofer 1 4. Bass ...
-
Sharp CD-PC3500 - page 7
HK <P=001> (Continued) ■ Remote control 1 1. Remote Control Transmitter LED 1 2 3 1 2 3 5 6 7 4 11 14 16 19 12 15 17 20 8 9 21 22 10 13 18 23 24 25 26 27 1 2. Surround Level Buttons 1 3. Center Level Buttons 1 4. Dolby Pro Logic Surround Mode Button 1 5. Test Tone Button 1 6. Balance Control Buttons ● Tuner control section 1 7. Preset Up/ ...
-
Sharp CD-PC3500 - page 8
<P=002> (Continued) ■ Speaker connection Connect the speaker wires to the SPEAKER terminals as shown. Front speakers ● Connect the black wire to the minus ( − ) terminal, and the red wire to the plus (+) terminal. Center speaker and rear speakers ● Connect the wire with the white line to the minus ( − ) terminal and the plain wire t ...
-
Sharp CD-PC3500 - page 9
<P=003> (Continued) Installation of the rear speakers: If possible, mount the rear speakers on the wall. lnstall them 23" - 35" (60 - 90 cm) above the height of your ears when seated, if possible. ■ To mount the rear speakers on the wall The design of the rear speakers allows them to be hung on the wall. Be sure to use the type an ...
-
Sharp CD-PC3500 - page 10
<P=004> (Continued) ■ Demo mode When the AC power cord is first connected, the unit will enter the demonstration mode. To cancel the demonstration mode: When the unit is in the stand-by mode (demonstration mode), press the X-BASS/DEMO button. ● The demonstration mode will be canceled and the unit will be in the low power consumption mode. ...
-
Sharp CD-PC3500 - page 11
HK <P=001> SOUND CONTROL 01 2 29 30 MAXIMUM ..... ■ Volume (Main unit operation) When the VOLUME control is turned clockwise, the volume will incr ea se. W hen it i s turne d c ount ercl oc kwi se, t he volu me w il l decrease. (Remote control operation) Pre ss the VO LUM E b utt on to i nc rea se th e vo lume an d the V O L U M E b u t t o ...
-
Sharp CD-PC3500 - page 12
<P=002> (Continued) ■ Dolby Pro Logic Surround mode Video and DVD software programs carrying the t r a d e m a r k a r e r e c o r d i n g s t h a t c o n t a i n t h e s a m e Dolby Surround data as used in movie theaters. The Dolby Pro Logic Surround mode uses Dolby Surround data to bring the full presence experienced in a movie theater i ...
-
Sharp CD-PC3500 - page 13
<P=003> SETTING THE CLO CK POWER ON/ STAND-BY CLOCK MEMORY/SET TUNING/ TIME ( ) In this example, the clock is set for the 12-hour (AM 12:00) sys- tem. 1 Press the ON/STAND-BY button to enter the stand-by mode. 2 Press the CLOCK button. 3 Within 5 seconds, press the MEMORY/SET button. 4 Press the TUNING/TIME ( or ) button to select the time di ...
-
Sharp CD-PC3500 - page 14
<P=004> COMP ACT DISC OPERA TION ■ CD playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button. 3 Press the OPEN/CLOSE button to open the disc tray. 4 Place the CD(s) on the disc tray, label side up. ● CDs can be placed on any open position on the disc tray. ● Be sure to place 3" (8 cm) CD(s) in the middl ...
-
Sharp CD-PC3500 - page 15
<P=005> (Continued) ■ Disc number selection 1 When stopped, press the DISC SKIP button. 2 Press the ( ) button. ● The next disc playback will begin, after which each following disc will be played sequentially. Notes: ● When the D ISC SKIP button is pr esse d dur ing playback, playback will begin automatically from the next disc. (It is ...
-
Sharp CD-PC3500 - page 16
HK <P=001> (Continued) ■ APMS (Automatic Programmable Music Selector) You can playback the tracks on the CDs in the disc 1 - 3 positions in any order desired. By specifying the disc numbers from 1 to 3, and the track numbers from 1 to 99, you can choose up to 32 selections for playback in the order you like. 1 When in th e st op mode , u se ...
-
Sharp CD-PC3500 - page 17
<P=002> 2,3,5,6 1 4 RADIO OPERA TION ■ Tuning 1 Press the ON/STAND-BY button to turn the power on. 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) button to select the desired fre- quency band. (FM ST, FM or AM) 4 Press the TUNING/TIME ( or ) button to tune into the desired station. Manual tuning: Press the TUNING/TIME ( or ) butt ...
-
Sharp CD-PC3500 - page 18
<P=003> TAPE TAPE 1 TAPE 2 PUSH EJECT PUSH EJECT 1 2,5 6 4 3 1 6 6 3 4 2,5 (Continued) To recall a memorized station: Press the PRESET ( or ) button for less than 0.5 seconds to select the desired station. ● The stations (preset channel number, frequency and frequency band) which have been stored in memory will appear in the display in nume ...
-
Sharp CD-PC3500 - page 19
<P=004> RECORDING ● When r eco rding i mportant select i ons, be sure to make a preliminary test to ensure that the desired material is being properly recorded. ● The volume and sound quality can be adjusted with no effect on the recorded signal. (Variable Sound Monitor) ● Metal and CrO 2 tapes should not be used for recording or dubbin ...
-
Sharp CD-PC3500 - page 20
HK TIMER/ SLEEP Timer set indicator POWER ON/ STAND-BY MEMORY/ SET TUNING/ TIME ( ) CD TUNER (BAND) VIDEO/ AUX TAPE (1 2) <P=001> HOW TO USE THE BUIL T -IN TIMER 3 4 5 ■ Timer playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD, TUNER (BAND), TAPE (1 2) or VIDEO/AUX button to select the desired function. 3 Press the ...
-
Sharp CD-PC3500 - page 21
<P=002> (Continued) ■ Sleep operation The radio, compact disc and cassette deck can all be turned off automatically. 1 Play back the desired sound source. 2 Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed. To change the sleep time: While the sleep time is displayed, press the TUNING/TIME ( or ) button to adjust ...
-
Sharp CD-PC3500 - page 22
<P=003> (Continued) ■ Headphones ● Before plugging in or unplugging the headphones, make sure the volume level is reduced. ● Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16 ohms and 50 ohms impedance. The recommended impedance is 32 ohms. ● When headphones are connected, the speakers are discon- nect ...
-
Sharp CD-PC3500 - page 23
<P=004> OPEN/ CLOSE POWER ON/ STAND-BY CD TRANSPORTING THE UNIT Before you move this product to a new location, proceed as follows: 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button. 3 Press the OPEN/CLOSE button to open the disc tray. ● Remove all CDs inserted in the unit. 4 Press the OPEN/CLOSE button to close the ...
-
Sharp CD-PC3500 - page 24
TINSE0281AWZZ Printed in Malaysia A9912.HK CONSUMER LIMITED W ARRANTY SHARP ELECTRONICS CORPORA TION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container , will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the def ...
Sharp CD-PC3500についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもSharp CD-PC3500の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSharp CD-PC3500で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。