Ratoc Systems PCIU2の取扱説明書

19ページ 0.39 mb
ダウンロード

ページに移動 of 19

Summary
  • Ratoc Systems PCIU2 - page 1

    PCIU2 User ’ s Manual June 2001 Rev .1.0 USB2.0 PCI Host Boar d ...

  • Ratoc Systems PCIU2 - page 2

    2 Contents 1. Introduction ........................................................................... 3 1-1. Features ....................................................................................................... 3 1-2. Restrictions ................................................................................................. 3 1-3. Re ...

  • Ratoc Systems PCIU2 - page 3

    3 •Supports 480Mbps(High-speed), 12Mbps(Full-speed), 1.5Mbps(Low-speed) data transfer mode. This USB2.0 host adapter is fully backwards compatible with the currrent USB1.1 devices. •Certified and passed USB HI-SPEED Compliance test. •Includes our original USB2.0 EHCI driver . Supports W indows 98SE, W indows Me, W indows 2000. •500mA max. p ...

  • Ratoc Systems PCIU2 - page 4

    4 2. Before installing... 2-1. Package Check the package contents: •PCIU2 PCI Board •Low profile bracket •Software CD-ROM •User ’ s manual NOTE If any of these items are missing from the PCIU2 retail package, contact your supplier immediately . 2-2. Using Low-Profile Bracket If you use the PCIU2 with a Low-Profile PC, you have to replace ...

  • Ratoc Systems PCIU2 - page 5

    5 After installing it, start your PC. Then, you need to install the driver for the PCIU2. A)When you use W indows 98SE----------- Proceed to Chapter 3-2. B)When you use W indows 2000------------Proceed to Chapter 3-3. C)When you use W indows Me--------------Proceed to Chapter 3-4. T urn off your computer and install the PCIU2 into a PCI slot. Pleas ...

  • Ratoc Systems PCIU2 - page 6

    6 3-2. Installing the driver(Windows 98SE) When you use W indows 98SE, follow the steps to install the driver . 1 . When you start your PC after installing the PCIU2, the following Hardware W izard will appear . Insert the PCIU2 CD-ROM into the CD-ROM drive and click [Next] . 2. Select [Search for the best driver for your device.(Recommended)] and ...

  • Ratoc Systems PCIU2 - page 7

    7 4. Select [The updated driver(Recommended) NEC USB Open Host Controller] and click [Next] . 5. Click [Next] . 6 . Click [Finish] . 7. The same hardware wizard as shown at the step 1 through 6 will appear again. Follow the same procedure. ...

  • Ratoc Systems PCIU2 - page 8

    8 10. Select [Specify a location] and type in [D:PCIU2] and click [Next] . (D means your CD-ROM drive letter . If your CD-ROM is “E”, you have to type in [E:PCIU2] .) 8 . Then, the following hardware wizard will appear . 9. Select [Search for the best driver for your device.(Recommended)] and click [Next] . ...

  • Ratoc Systems PCIU2 - page 9

    9 1 1. Make sure W indows found the PCIEHCI.INF file in the PCIU2 folder in the CD-ROM drive. Then, click [Next] . 1 2. Click [Finish] . 13. Restart your PC. Y ou have now finished installing the driver . ...

  • Ratoc Systems PCIU2 - page 10

    10 14 . T o verify that the driver is installed correctly , right-click on [My Computer] , select [System Properties] , and then select the [Device Manager] tab. If you can find two [NEC USB Open Host Contr oller] strings and a [RA T OC PCI USB Enhanced Host Controller] string under the [Universal Serial Bus Controllers] , the driver is installed c ...

  • Ratoc Systems PCIU2 - page 11

    11 3-3. Installing the driver(Windows 2000) Before you install the driver , make sure W indows 2000 Service Pack2 or later is already installed . T o verify Service Pack2 or later is installed, right-click on [My Computer] , and then select [System Properties] .If you can find a “Service Pack” string as shown below , Service Pack is already ins ...

  • Ratoc Systems PCIU2 - page 12

    12 3. Select [Specify a location] and click [Next] . 4 . The following dialog box will appear .T ype in [E:PCIU2] and click [OK] . (E means your CD-ROM drive letter . If your CD-ROM is “D”, you have to type in [D:PCIU2] .) 5. Make sure W indows found the PCIEHCI.INF file in the PCIU2 folder in the CD-ROM drive. Then, click [Next] . 6 . Click ...

  • Ratoc Systems PCIU2 - page 13

    13 8. T o verify that the driver is installed correctly , right-click on [My Computer] , select [System Properties] , and then select the [Hardware] tab. Then, click the [Device Manager] button. If you can find two [NEC PCI to USB Open Host Controller] strings and a [RA TOC PCI USB Enhanced Host Controller] string under the [Universal Serial Bus Co ...

  • Ratoc Systems PCIU2 - page 14

    14 2. Select [RA T OC PCI USB Enhanced Host Contr oller] and click [OK] . 3-4. Installing the driver(Windows Me) When you use W indows Me, follow the steps to install the driver . 1 . When you start your PC after installing the PCIU2, the following Hardware W izard will appear . Insert the PCIU2 CD-ROM into the CD-ROM drive and select [Automatic se ...

  • Ratoc Systems PCIU2 - page 15

    15 NOTE Y ou may find the [RA TOC PCI USB Enhanced Host Contr oller] string with green ? marks. But this doesn’t affect the peformance of this PCIU2 board. 5. T o verify that the driver is installed correctly , right-click on [My Computer] , select [System Properties] , and then select the [Device Manager] tab. If you can find two [NEC USB Open H ...

  • Ratoc Systems PCIU2 - page 16

    16 4-1. How to Register W e highly recommend to register yourself as our customer through our on-line registration. 1 . On the Internet, access our site ( http://www .ratocsystems.com/english/ ) 2 . Follow window menu guide to register . 3 . Fill out and submit the registration form. 4-2. Software Update and Support - Driver Update - The latest dri ...

  • Ratoc Systems PCIU2 - page 17

    17 Option is available (sold separately) at the web site: 1. http://www .ratocsystems.com/english/ 2. http://www .firewireshop.com -USB2-01 (USB2.0 cable(3 feet)) If you have any questions about the option, contact to: RA T OC Systems Insternational, Inc. T ech Support TEL : (408)955-9400 F AX: (408)955-9402 E-mail: int-support@rexpccard.co.jp 5. O ...

  • Ratoc Systems PCIU2 - page 18

    18 Model Name Board T ype PCI Bus transfer USB data transfer rate Environment USB connector USB port corrent Optional connector USB 2.0 T ype A x 2port 500mA at each port(MAX.) J4 connector to be used for an optional front bay 6. Specifications PCIU2 USB2.0 PCI Host Board 32bitPCI Bus Master(PCI Local Bus 2.2 compliant) 480/12/1.5 Mbps(HS/FS auto-d ...

  • Ratoc Systems PCIU2 - page 19

    19 Copyright ©2001 RA TOC Systems,Inc. All rights reserved. No part of this publication may be reproduced, store in a retrieval system, or transmitted in any form or by any means(electronic, mechanical, photocopying, recording or otherwise) without the prior written consent of RA TOC Systems,Inc. T rademarks -Windows is a registered trademark of M ...

メーカー Ratoc Systems カテゴリー Network Card

Ratoc Systems PCIU2のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- PCIU2の取扱説明書
- Ratoc Systemsの製品カード
- パンフレット
- またはRatoc Systems PCIU2の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Ratoc Systems PCIU2の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Ratoc Systems PCIU2の取り付け説明書、サービスマニュアル、簡易説明書、またはRatoc Systems PCIU2のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Ratoc Systems PCIU2の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Ratoc Systems PCIU2デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがRatoc Systems PCIU2を使用するのを助ける技術的文書のことです。説明書は通常、全てのRatoc Systems PCIU2ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Ratoc Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Ratoc Systems PCIU2の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははRatoc Systems PCIU2の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Ratoc Systems PCIU2に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Ratoc Systems PCIU2デバイスの基本機能を使うにあたってのヒント。 Ratoc Systems PCIU2のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Ratoc Systems PCIU2に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるRatoc Systems PCIU2のメーカー/サービスへの連絡先に関する情報。

Ratoc Systems PCIU2についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもRatoc Systems PCIU2の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがRatoc Systems PCIU2で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)