FARGO electronic HDP5000の取扱説明書

44ページ 0.95 mb
ダウンロード

ページに移動 of 44

Summary
  • FARGO electronic HDP5000 - page 1

    HDP5000 CUPS Driver User Guide Linux & MAC OS © 2009 HID Global Corporation. All rights reserved. Document Number L001389 Rev.1.1 Fargo HDP5000 CUPS Driver User G uide for Linux and MAC ...

  • FARGO electronic HDP5000 - page 2

    HDP5000 CUPS User Guide Linux & Mac OS User Guide (Rev 1.1), property of HID/Fargo Electronics, Incorporated © 2009 HID Global Corporation. All rights reserved. Exclusive permission is granted to authorized resellers of HID Global products to re produce and distribute this copyrighted document to authorized HID Global customers, who have signe ...

  • FARGO electronic HDP5000 - page 3

    Table of Contents Supported Distributi ons CUPS 5 Installation Procedure for the CUPS Driver on Linux OS 6 Installation Procedure for MAC OS X Driver 7 HID/Fargo Printer Driver Setup 11 Selecting the Card Size 11 Selecting the Supported Ribbon Types 12 Selecting the Disable Printing Option 13 Selecting the Print Both Sides Optio n 13 Selecting the ...

  • FARGO electronic HDP5000 - page 4

    Setting Printer Options 35 Canceling Pri nt jobs from Com mand Line 35 General Printing Options for CUPS 35 Ethernet Installati on Procedure for the MAC Driver 36 Printer Maintenance Op tions for Linux and Mac 40 Performi ng a Ribbon Se nsor Cali bration 40 Performi ng a Film Sensor Calibratio n 41 Performi ng a Laminati on Sensor Ca libration 42 C ...

  • FARGO electronic HDP5000 - page 5

    Supported Distributions CUPS The Common Unix Printing System ( CUPS ), a modular printing system for Unix-like computer operating systems, allows a com puter to act as a print serv er. A computer running CUPS is a host that can accept print jobs from c lient computers, process them, and send them to the appropriate printe r. Linux 32-bit - Ubuntu 7 ...

  • FARGO electronic HDP5000 - page 6

    Installation Procedure for the CUPS Driver on Linux OS Note: On some Linux Distributions, it may be necessary to disable SELinux (security enhanced Linux) capabilities in order to install or use the CUPS Driver. Refer to the SELinux web site at: www.nsa.gov/selinux/ or the documentation for your specific distribution for more information. Step Proc ...

  • FARGO electronic HDP5000 - page 7

    Installation Procedure for MAC OS X Driver  Download the Mac Printer Driver from www.fargosupport.com to the desktop. (This will be in Zip format)  Unzip the folder  Double-click on the HDP5000V1.0.0.4 PKG folder to start the installation HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.1 7 ...

  • FARGO electronic HDP5000 - page 8

    HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.1 8 ...

  • FARGO electronic HDP5000 - page 9

    HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.1 9 ...

  • FARGO electronic HDP5000 - page 10

    HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.1 10 ...

  • FARGO electronic HDP5000 - page 11

    HID/Fargo Printer Driver Setup Once the CUPS and MAC driver are installed the printer options are setup as shown below. Go to webpage http://localhost:631 In order to access the Set Printer Driver options shown below. (NOTE: Click here for Ethernet setup. Ethernet Installation Procedure for the MAC Driver ) Selecting the Card Size Card Options avai ...

  • FARGO electronic HDP5000 - page 12

    Selecting the Supported Ribbon Types Command Line Usage CUPS option Description Ribbon = YMC Ribbon Type = YMC Sets the Ribbon type for the print job to YMC – Full Color Ribbon = YMCK Ribbon Type = YMCK Sets the Ribbon type for the print job to YMCK – Full Color/ Resin Black. Ribbon = YMCKK Ribbon Type = YMCKK Sets the Ribbon type for the print ...

  • FARGO electronic HDP5000 - page 13

    Selecting the Disable Printing Option Command Line Usage CUPS option Description DisablePrinting = True Disable Printing = Yes Select it to encode or re-encode cards to save time and avoid the use of printing supplies. DisablePrinting = False Disable Printing = No Select it to perform full printing and encoding operations. Selecting the Print Both ...

  • FARGO electronic HDP5000 - page 14

    Using the Image Color Capabilities Selecting the Color Matching Options Command Line Usage CUPS Option Description ColorMatching = System Color Matching = System Color Management This provides a closer match to the RGB color specifications. ( Note: This option shifts colors to a different color model so the colors in the image will more closely mat ...

  • FARGO electronic HDP5000 - page 15

    Selecting Resin Dither: Select the appropriate dither method according to the type of image to be printed. ( Note: This option only affects those objects printed on the backside of a card with the resin black Panel of a YMCK or YMCKK Print Ribbon. This is only enabled when using at least one K panel and dual sided enabled, splitting one set of pane ...

  • FARGO electronic HDP5000 - page 16

    Following the Resin Heat Front Procedure Command Line Usage CUPS optio n Description ResinHeatFront=0 <-50 to 50> Resin Heat Front (K) = 0 1. Adjust the Resin Heat Front value higher to use more heat to transfer resin to a card. 2. Adjust the Resin Heat Front value lower to reduce the amount of heat (used to transfer resin to the card). Follo ...

  • FARGO electronic HDP5000 - page 17

    Image Transfer Options Selecting the Horizontal Option Note: Over adjusting the Horizontal offset may result in ribbon breaking. Command Line Usage CUPS option Description HOffset=0 <-100 to 100> Horizontal Offset = 0 Use the Horizontal adjustment to move the image toward the card output side of the Printer (if a positive number is entered) a ...

  • FARGO electronic HDP5000 - page 18

    Transfer Temperature Command Line Usage CUPS option Description TransferHeat =0 <150 to 190> Transfer Heat = 0 <150 to 190> Transfer Temperature Sets temperature for InTM transfer in Celsius Lower limit = 150.0 Celsius, Upper limit = 190.0 Celsius • UltraCard III - Composite: Default = 175.0 Celsius • UltraCard- PVC: Default = 175.0 ...

  • FARGO electronic HDP5000 - page 19

    K-Panel Options Selecting the Front K-Panel Area Command Line Usage CUPS option Description KPanelAreaFront = None Front K-Panel Area = None Select None to have any graphics objects that are black in color to be printed using composite colors (YMC) KPanelAreaFront = FullCard Front K-Panel Area = Full Card Select Full card to print any black graphic ...

  • FARGO electronic HDP5000 - page 20

    Selecting the K-Panel Only Front Options Command Line Usage CUPS Options Description KPanelOnlyFront = True K-Panel Only Front = Yes Select K-Panel Only Front if printing resin black onto a white background in order to maximize the sharpness of printed text and bar codes. KPanelOnlyFront = False K-Panel Only Front = No Select K-Panel Only Front to ...

  • FARGO electronic HDP5000 - page 21

    Lamination Options Lamination Position and Speed: Command Line Usage CUPS Options Description LaminationPosition = <-100 to +100> Lamination Position = < -100 to +100> Horizontal Offset: To move the overlaminate more toward the card output side of the Printer, enter a positive number LaminationSpeed = < 8 to 55> Lamination Speed = ...

  • FARGO electronic HDP5000 - page 22

    Lamination Film Types Per Cartridge Command Line Usage CUPS Options Description LaminationType1 = 0 Lamination Film type for cartridge 1 = Clear Film Indicates that clear film is being used in cartridge 1. LaminationType1 = 1 Lamination Film type for cartridge 1 = 0.6 Polygard Indicates that 0.6 Polyguard is being used in cartridge 1. LaminationTyp ...

  • FARGO electronic HDP5000 - page 23

    LaminationType2 = 3 Lamination Film type for cartridge 2 = Polyguard Alternating Patch Indicates that Polyguard Alternating Patch is being used in cartridge 2. LaminationType2 = 4 Lamination Film type for cartridge 2 = Registered Film Indicates that Registered Film is being used in cartridge 2. LaminationType2 = 5 Lamination Film type for cartridge ...

  • FARGO electronic HDP5000 - page 24

    Magnetic Encoding Options Setting the Encoding Mode Command Line Usage CUPS option Description MagEncodingMode1 = ISO Magnetic Stripe Encoding Mode = ISO Sets the Encoding Mode for the Print job to ISO. See Sending ISO Magnetic Encoding Information for additional information. MagEncodingMode1 = JIS2 Magnetic Stripe Encoding Mode = JIS II Sets the E ...

  • FARGO electronic HDP5000 - page 25

    additional information. MagEncodingMode3 = ISO Magnetic Stripe Encoding Mode = ISO Sets the Encoding Mode for the Print job to ISO. See Sending ISO Magnetic Encoding Information for additional information. MagEncodingMode3 = JIS2 Magnetic Stripe Encoding Mode = JIS II Sets the Encoding Mode for the Print job to JIS II. See Sending JIS II Magnetic E ...

  • FARGO electronic HDP5000 - page 26

    Sending ISO Magnetic Encoding Information The CUPS Driver uses URL Encoding when defining data to be encoding to the Magnetic Stripe. Any special characters (such as start and end sentine ls) must be described with URL encoding to be recognized. See the URL Encoding Reference Reviewing the URL Encoding Reference for additional information.. • The ...

  • FARGO electronic HDP5000 - page 27

    Sending JIS II Magnetic Encoding Information The CUPS Driver uses URL Encoding when defining data to be encoding to the Magnetic Stripe. Any special characters (such as start and end sentine ls) must be described with URL ncoding to be recognized. See the URL Encoding Reference below. e  Sending RAW Magnetic Encodi ng Information The CUPS Driver ...

  • FARGO electronic HDP5000 - page 28

    Reviewing the ASCII Code and Character Table ASCII Code Character ASCII Code Character ASCII Code Character 32 space 56 8 80 P 33 ! 57 9 81 Q 34 “ 58 : 82 R 35 # 59 ; 83 S 36 $ 60 < 84 T 37 % 61 = 85 U 38 & 62 > 86 V 39 ' 63 ? 87 W 40 ( 64 @ 88 X 41 ) 65 A 89 Y 42 * 66 B 90 Z 43 + 67 C 91 [ 44 ' 68 D 92 45 - 69 E 93 ] 46 . 7 ...

  • FARGO electronic HDP5000 - page 29

    Using the Command Line Option Setup for CUPS Adding a USB Printer The primary CUPS interface can be accesse d on the local computer using a web browser. The address for the CUPS interface is: http://localhost:631/ Step Procedure 1 Attach Power and USB to the printer. 2 From a Terminal window, run lshal to retrieve the list of devices. 3 Refer to th ...

  • FARGO electronic HDP5000 - page 30

    10 After installation is complete, it may be necessary to specify the page sca ling options for the Print Queue. Example output from lshal udi = '/org/freedesktop/Hal/devices/usb_device_9b0_2110_A8010217_if0_printer_A8010217' info.addons = {'hal_lpadmin --add'} (string list) info.callouts.remove = {'hal_lpadmin --remove&apo ...

  • FARGO electronic HDP5000 - page 31

    printer.vendor = 'Fargo Electronics Inc ' (string) Adding a Network Printer The primary CUPS interface can be accessed on the local computer using a web browser. The address for the CUPS interface is: http://localhost:631/ Step Procedure 1 Choose Add Printer ( Note : If you are asked for a username and password, enter your login username ...

  • FARGO electronic HDP5000 - page 32

    Determining the Printer IP Address Use this procedure to determine the IP address of a Printer. Step Procedure 1 Apply power to the Printer. 2 Ensure that the Printer is connected to the network via the RJ45 jack on the back of the Printer. 3 Wait up to one minute for the Printer to allow the Printer to obtain an IP address from DHCP. 4 Press Info ...

  • FARGO electronic HDP5000 - page 33

    Probing for Fargo Network Printers on the Network The fargo-netprobe program installed with the driver can be used to probe for Fargo printers on the local subnetwork. This program must be run as root: # fargo-netprobe 192.168.1.127 Reviewing the File Listing /usr/share/cups/profiles/sRGB.icm Reference Color Profile /usr/share/cups/profiles/HDP5000 ...

  • FARGO electronic HDP5000 - page 34

    Printing a Sample Card Entering the Print Only Command Using the Fargo Card Printer ---------------------------- To test the functionality of the printer, you can type the following command to print a sample card (root privileges not necessary): $ lpr samplecard.jpg Entering the Print with Mag Encoding Command Run the following command: # lp –d [ ...

  • FARGO electronic HDP5000 - page 35

    S etting Printer Options For many types of files, the default printer opt ions m ay be sufficient for your needs. However, at times you may need to change the options for a particular file you are printing. Cups provides both they System V (lp) and Berkeley (lpr) printing commands. The lp and lpr commands allow you to pass printer options using the ...

  • FARGO electronic HDP5000 - page 36

    Ethernet Installation Procedure for the CUPS Driver Step Procedure 1 On the home page click the add printer button. 2 On the Add Printer page  Enter a name for the printer. The name cannot contain any spaces.  Enter a description of the printer’s location.  Enter a description of the printer. 3 On the Device for (printer name) page, sele ...

  • FARGO electronic HDP5000 - page 37

    4 On the Device URI for (printer name) page enter the IP address of the printer in the format of socket://aaa.bbb.ccc.ddd:9100 where aaa.bbb.ccc.ddd is the IP address shown on the printer LCD display 5 On the Make/Manufacturer page, select Fargo Electronics from the Make: list HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.1 37 ...

  • FARGO electronic HDP5000 - page 38

    6 On the Model/Driver page select HDP5000 from the Model: list and click the Add Printer button 7 Refer to the users guide to set up the print options. When you have completed setting up the options click on the Set Printer Options to save your changes. HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.1 38 ...

  • FARGO electronic HDP5000 - page 39

    8 Click the Print Test Page button to confirm printer operation. HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.1 39 ...

  • FARGO electronic HDP5000 - page 40

    Printer Maintenance Options for Linux and Mac Performing a Ribbon Sensor Calibration Step Description 1 Ensure that the ribbon cartridge is removed. 2 Ensure the Printer’s cover is closed. 3 From a terminal window enter: fargo-sendprn “/usr/share/fargo/HDP5000/RibbonCalibration.prn”  4 The Printer’s LCD will display CALIBRATE PASSED. Cli ...

  • FARGO electronic HDP5000 - page 41

    Performing a Film Sensor Calibration Step Description 1 Ensure the film cartridge is installed. 2 Ensure the printer cover is closed. 3 From a terminal window enter: fargo-sendprn “/usr/share/fargo/HDP5000/FilmCalibration.prn”  4 The Printer’s LCD will display CALIBRATE PASSED. Click on the OK button on the LCD display to complete the proc ...

  • FARGO electronic HDP5000 - page 42

    Performing a Lamination Sensor Calibration Step Description 1 Ensure that the cartridges are out of the Laminator. 2 Ensure the Laminator cover is closed. 3 From a terminal window enter: fargo-sendprn “/usr/share/fargo/HDP5000/LaminatorCalibration.prn”  4 The Printer’s LCD will display CALIBRATE PASSED. Click on the OK button on the LCD di ...

  • FARGO electronic HDP5000 - page 43

    Cleaning the Printer Step Description 1 Remove Card, Film and Laminate cartridges and close the covers. 2 Remove the paper backing from both sides of the Cleaning Card. *Note: (DO NOT remove left liner if a magnetic encoding module is installed in your printer) 3 Insert the Cleaning Card into the Card Hopper’s infeed rollers. 4 From a terminal wi ...

  • FARGO electronic HDP5000 - page 44

    Printing a Test Card Step Description 1 Ensure that the cards are in the hopper. 2 Ensure that YMCK ribbon is installed in the printer. 3 From a terminal window enter: lpr -l “/usr/share/fargo/HDP5000/HDP5000Tst.prn” 4 The test card should print. HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.1 44 ...

メーカー FARGO electronic カテゴリー Computer Drive

FARGO electronic HDP5000のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- HDP5000の取扱説明書
- FARGO electronicの製品カード
- パンフレット
- またはFARGO electronic HDP5000の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、FARGO electronic HDP5000の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、FARGO electronic HDP5000の取り付け説明書、サービスマニュアル、簡易説明書、またはFARGO electronic HDP5000のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、FARGO electronic HDP5000の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

FARGO electronic HDP5000デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがFARGO electronic HDP5000を使用するのを助ける技術的文書のことです。説明書は通常、全てのFARGO electronic HDP5000ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

FARGO electronicの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. FARGO electronic HDP5000の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははFARGO electronic HDP5000の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。FARGO electronic HDP5000に関してこのドキュメントで見つけることができる全てのヒントの目次
3. FARGO electronic HDP5000デバイスの基本機能を使うにあたってのヒント。 FARGO electronic HDP5000のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。FARGO electronic HDP5000に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるFARGO electronic HDP5000のメーカー/サービスへの連絡先に関する情報。

FARGO electronic HDP5000についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもFARGO electronic HDP5000の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがFARGO electronic HDP5000で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)