日本語 dropdown-ico

Altinex MULTI-TASKER MT109-102の取扱説明書

26ページ 0.49 mb
ダウンロード

ページに移動 of 26

Summary
  • Altinex MULTI-TASKER MT109-102 - page 1

    MULTI - TA SKER ™ M ANUAL PART NUMBER: 400 - 0343 - 00 3 MT109 - 102 3 IN 1 OUT A UDIO/MIC MIXER FOR MULTI - TA SKER ™ USER’S GUIDE ...

  • Altinex MULTI-TASKER MT109-102 - page 2

    MULTI - TA SKER ™ 400 - 0343 - 00 3 1 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WA RNINGS .............. 2 GENERAL .......................................................... 2 CLEANING ......................................................... 2 FCC / CE NOTICE .............................................. 2 ABOUT YOUR MT109 - 102 ........... ...

  • Altinex MULTI-TASKER MT109-102 - page 3

    MULTI - TA SKER ™ 400 - 0343 - 00 3 2 2 PRECAUTIONS / SAFETY WARNINGS ....... 1 Please read this manual carefully before using your MT 109 - 102 . Keep this manual handy for future reference. These safety instructions are to ensure the long life o f your MT 109 - 102 and to prevent fire and shock hazard. Please read them carefully and heed all wa ...

  • Altinex MULTI-TASKER MT109-102 - page 4

    MULTI - TA SKER ™ 400 - 0343 - 00 3 3 3 ABOUT YOUR MT109 - 102 2 MT109 - 10 2 3 in 1 out Audio Mixer Card The MT 109 - 102 is a Stereo Audio Mixer Card . Wh en installed in the Basic Enclosure (MT100 - 100), t his card allows connection of up to three line level balanced or unbalanced microphone inputs. Mixing of inputs is controled via easy - to ...

  • Altinex MULTI-TASKER MT109-102 - page 5

    MULTI - TA SKER ™ 400 - 0343 - 00 3 4 4 DESCRIPTION OF MT109 - 102 4 ...

  • Altinex MULTI-TASKER MT109-102 - page 6

    MULTI - TA SKER ™ 400 - 0343 - 00 3 5 5 APPLICATION DIAGRAM 5 DIAGRAM 1 : TYPICA L SETUP ...

  • Altinex MULTI-TASKER MT109-102 - page 7

    MULTI - TA SKER ™ 400 - 0343 - 00 3 6 6 DIAGRAM 2 : INTERNAL VIEW Σ AUDIO LINE/MIC INPUT1 BALANCED AUDIO LINE/MIC INPUT2 BALANCED MIC S/W GAIN MIC S/W GAIN S/W GAIN PHANTOM POWER MP CONTROL POWER SUPPLY LINE/MIC INPUT3 BALANCED MIC GAIN S/W FIXED MIX LINE LEVEL OUTPUT VOLUME BASS TREBLE SW1 SW2 SW3 SW10 ADJUSTABLE MIX LINE LEVEL OUTPUT TERMINAL ...

  • Altinex MULTI-TASKER MT109-102 - page 8

    MULTI - TA SKER ™ 400 - 0343 - 00 3 7 7 DIAGRAM 3 : SWITCH POSITIONS SW1 INPUT1 LINE MIC PHANTOM ON OFF LINE INPUT2 MIC LINE INPUT3 MIC SW2 SW3 SW4 SW5 SW6 SW7 OFF ON ON OFF ON OFF ON LINE OUTPUT FIX ADJ OFF ON SW9 SW10 SW8 - + + - OFF OFF ON ON ON OFF OFF OFF ON ON OFF POWER POWER PHANTOM OFF ON + - - + POWER PHANTOM OFF ON + - - + ...

  • Altinex MULTI-TASKER MT109-102 - page 9

    MULTI - TA SKER ™ 400 - 0343 - 00 3 8 8 INSTALLING YOUR MT109 - 102 6 Step 1. Turn off the power to the Multi - Tasker™ enclosure. Step 2. Slide the MT 109 - 102 into an available slot in the Multi - Tasker™ Basic Enclosure in order to connect to the bus. Make sure that the MT 109 - 102 card fits into place. Step 3. Secure the card to the Mul ...

  • Altinex MULTI-TASKER MT109-102 - page 10

    MULTI - TA SKER ™ 400 - 0343 - 00 3 9 9 The Group ID is a number representing a group of cards defined with the [W R] command. Wh en using the Group ID, all cards in the group will perform the given instruction. Changing the position of a card will significan tly affect the commands recorded on software definitions or third party control systems. ...

  • Altinex MULTI-TASKER MT109-102 - page 11

    MULTI - TA SKER ™ 400 - 0343 - 00 3 10 10 4. [?CnUi] This command will return general information about the card and its status. It is a function of both the card and the front panel and is only available with Multi - Tasker™ Front Panel systems that have the following firmware: 690 - 0122 - 015 = Version 015 or later. 690 - 0123 - 004 = Versio ...

  • Altinex MULTI-TASKER MT109-102 - page 12

    MULTI - TA SKER ™ 400 - 0343 - 00 3 11 11 7. […S] – SAVE This command will save the configur ation command being sent in memory. W hen sending the command [ VLBA12 C4S] , after reset or power up, the bass level on C4 will be 12 out of 16 . 8. […F] – FEEDBACK After processing a command, an OK or ER will be returned as feedback if "F&q ...

  • Altinex MULTI-TASKER MT109-102 - page 13

    MULTI - TA SKER ™ 400 - 0343 - 00 3 12 12 Example: An MT 109 - 102 is in slot # 4. Adjust the BASS on the output by sending the command [SELBC4] and then using the [+] and [ - ] commands. 13. [SELT] This command sets the path to adjust the treble level. The TREBLE level range is 00 to 16 and is adjustable using the [+] and [ - ] commands. Command ...

  • Altinex MULTI-TASKER MT109-102 - page 14

    MULTI - TA SKER ™ 400 - 0343 - 00 3 13 13 19. [LOD1] This command enables the loudness feature. Command Format: [LOD1CnUi] Cn = Card ID (n = slot # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example: Turn ON the Loudness feature of the MT 109 - 102 in slot #4 by sending t he command [LOD1C4]. 20. [CLR] This command clears the card and ...

  • Altinex MULTI-TASKER MT109-102 - page 15

    MULTI - TA SKER ™ 400 - 0343 - 00 3 14 14 Example: Ramp the o utput volume from a starting level of 1 to a level of 10 for the card in slot #8. Send the command [RUP= 1 0C8] and the system will respond with the following feedback: [02][03][04]…[ 1 0] 23. [RDN] This command ramps the OUTPUT volume down to a level of 1 at a rate defined using the ...

  • Altinex MULTI-TASKER MT109-102 - page 16

    MULTI - TA SKER ™ 400 - 0343 - 00 3 15 15 Command Format: [RAMP=xCnUi] x = Rate in Seconds 4 = 0. 25 seconds /step 6 = 0. 38 seconds /step 8 = 0.5 0 seconds /step 10 = 0. 63 seconds /step 12 = 0. 75 seconds /step 14 = 0.88 seconds /step 16 = 1. 00 seconds /step 18 = 1.13 seconds /step Cn = Card ID (n = # from 1 to max slots) Ui = Unit ID (i = # f ...

  • Altinex MULTI-TASKER MT109-102 - page 17

    MULTI - TA SKER ™ 400 - 0343 - 00 3 16 16 Some cards require more than one slot in the Multi - Tasker™ system. As an example, some matrix switcher cards require 4 slots. If there a re 5 of these cards installed, they would be numbered C4, C8, C12, C16 and C20. Changing the Card ID allows the user to define the cards as C1, C2, C3, C4 and C5. An ...

  • Altinex MULTI-TASKER MT109-102 - page 18

    MULTI - TA SKER ™ 400 - 0343 - 00 3 17 17 34. [RSN] This command reads the slot num ber of the card with a specified ID number, and returns the value to the system to be displayed in the terminal window. If more than one card has the same ID, each slot number will be displayed. Command Format: [ RSNCi ] Ci = Card ID (i = # from 1 to 99) Ex ample: ...

  • Altinex MULTI-TASKER MT109-102 - page 19

    MULTI - TA SKER ™ 400 - 0343 - 00 3 18 18 38. [RMG] This command may be used to delete an entire group, or all groups. REMOVE ONE GROUP MEMBERS Remove all the members from the gro up, effectively deleting the group. Command Format: [RMGkUi] Gk = Group number (k = # from 1 - 8) Ui = Unit ID (i = # from 0 - 9) Example: Group 1 consists of the cards ...

  • Altinex MULTI-TASKER MT109-102 - page 20

    MULTI - TA SKER ™ 400 - 0343 - 00 3 19 19 Example: Group 5 o f Unit ID 1 contains the cards in slots 1, 2 and 19. Read the member data for group 5 of Unit ID 1. Send the command [RDG5U1] and receive the following feedback: G1=C1C2C19 Now, clear group 5 by sending the command [CLMG5U1] . Reread the member data as ab ove and note the following feed ...

  • Altinex MULTI-TASKER MT109-102 - page 21

    MULTI - TA SKER ™ 400 - 0343 - 00 3 20 20 7.4 MENU MODE MENU MODE commands are R S- 232 commands that allow virtually the same functionality as programming commands. Unlike the programming commands in the previous sections, 7.2 and 7.3, MENU commands prompt the user to select from a list of available options. The system then responds b ased upon ...

  • Altinex MULTI-TASKER MT109-102 - page 22

    MULTI - TA SKER ™ 400 - 0343 - 00 3 21 21 Example: 08 (Slot 8): MT 109 - 10 2 NOTE: Only cards supporting the MENU feature wi ll be displayed. 5. Find the alphanumeric characters representing the card whose setup requires changing. It will be the first one or two characters in the line. 6. Press the number or letter associated with the card, and ...

  • Altinex MULTI-TASKER MT109-102 - page 23

    MULTI - TA SKER ™ 400 - 0343 - 00 3 22 22 MT109 - 10 2 EXPANDED MENUS 1. CONTROL: THIS CARD 1: SELECT (Card/Group) CURRENT SELECTION: THIS CARD 0: This Card 1: Group 1 2: Group 2 3: Group 3 4: Group 4 5: Group 5 6: Group 6 7: Group 7 8: Group 8 ESC: GO BACK KEY = 2: SAVE SAVE THIS SETTING? 1: YES 2: NO KEY= 3: CLEAR RESET CARD TO FACTORY DEFAULT: ...

  • Altinex MULTI-TASKER MT109-102 - page 24

    MULTI - TA SKER ™ 400 - 0343 - 00 3 23 23 3: SET RAMP TIME CURRENT RAMP TIME: 18 SEC 1: 04 SEC 2: 06 SEC 3: 08 SEC 4: 10 SEC 5: 12 SEC 6: 14 SEC 7: 16 SEC 8: 18 SEC ESC: GO BACK KEY= ESC: GO BACK KEY= 3: STATUS Equivalent to the [C] command. Returns the card status. 4: HE LP Equivalent to the [HELP] command. Displays a list of commands available ...

  • Altinex MULTI-TASKER MT109-102 - page 25

    MULTI - TA SKER ™ 400 - 0343 - 00 3 24 24 4. Set Ramp Time Starting from the main menu, set the ramp time to 10 seconds. Follow the keystrokes below. 2 Select SETUP Menu 3 Select Set Ramp Time 4 Select Ramp Time = 10 seconds ESC Return to SETUP menu ESC Return to the MAIN Menu 5. Display Card Statu s Starting from the Main Menu, follow the keystr ...

  • Altinex MULTI-TASKER MT109-102 - page 26

    MULTI - TA SKER ™ 400 - 0343 - 00 3 25 25 8.3 SOUND DISTORTION Cause 1: S ource level is above 0.7Vp - p. Solution1: Make sure that the s ource level is below 1V p - p. If the sound is still distorted, see Solution 2. Solution 2: Call ALTINEX at (714) 990 - 2300. 8.4 SOUND LEVEL IS LOW Cause 1: V olume levels are inappropriate. Solution 1: Turn u ...

メーカー Altinex カテゴリー Music Mixer

Altinex MULTI-TASKER MT109-102のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- MULTI-TASKER MT109-102の取扱説明書
- Altinexの製品カード
- パンフレット
- またはAltinex MULTI-TASKER MT109-102の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Altinex MULTI-TASKER MT109-102の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Altinex MULTI-TASKER MT109-102の取り付け説明書、サービスマニュアル、簡易説明書、またはAltinex MULTI-TASKER MT109-102のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Altinex MULTI-TASKER MT109-102の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Altinex MULTI-TASKER MT109-102デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAltinex MULTI-TASKER MT109-102を使用するのを助ける技術的文書のことです。説明書は通常、全てのAltinex MULTI-TASKER MT109-102ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Altinexの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Altinex MULTI-TASKER MT109-102の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAltinex MULTI-TASKER MT109-102の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Altinex MULTI-TASKER MT109-102に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Altinex MULTI-TASKER MT109-102デバイスの基本機能を使うにあたってのヒント。 Altinex MULTI-TASKER MT109-102のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Altinex MULTI-TASKER MT109-102に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAltinex MULTI-TASKER MT109-102のメーカー/サービスへの連絡先に関する情報。

Altinex MULTI-TASKER MT109-102についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもAltinex MULTI-TASKER MT109-102の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAltinex MULTI-TASKER MT109-102で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)