McIntosh C500Cの取扱説明書

39ページ 関係なし
ダウンロード

ページに移動 of 39

Summary
  • McIntosh C500C - page 1

    C500 Owner ’s Manual McIntosh Laboratory , Inc. 2 Chambers Street Binghamton, New Y ork 13903-2699 Phone: 607-723-3512 F AX: 607-724-0549 Controller/Preamplifier/T ube Preamplifier ...

  • McIntosh C500C - page 2

    2 IMPOR T ANT SAFETY INSTRUCTIONS! PLEASE READ THEM BEFORE OPERA TING THIS EQUIPMENT . W ARNING - TO REDUCE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS EQUIPMENT T O RAIN OR MOISTURE. The lightning flash with arrowhead, within an equilateral triangle, is in- tended to alert the user to the presence of uninsulated “dangerous voltage” wi ...

  • McIntosh C500C - page 3

    3 Customer Service T echnical Assist ance Please T ake A Moment Thank Y ou Copyright 2007 © by McIntosh Laboratory , Inc. The serial number , purchase date and McIntosh Dealer name are important to you for possible insurance claim or future service. The spaces below have been provided for you to record that information: Y our decision to own this ...

  • McIntosh C500C - page 4

    4 Import ant Information W ARNING: The McIntosh C500 is a two chassis design, with separate Preamplifier and Controller chassis. There are custom interconnecting cables and custom chassis sockets used to connect the two chassis together . Use ONL Y the custom interconnect cables supplied with the C500 to connect the chassis together . DO NOT connec ...

  • McIntosh C500C - page 5

    5 • • • • • Dual Chassis with Dual Mono Design The Dual Chassis design completely separates all power supply , microprocessor and control circuits from the pure audio circuits for total noise isolation. T o further aid in channel isolation the circuitry for both channels is totally separate, physically isolated and shielded. The C500 inco ...

  • McIntosh C500C - page 6

    6 The following dimensions can assist in determining the best location for the C500 Controller , C500 Preamplifier and C500 T ube Preamplifier . There is additional information on page 8 pertaining to installing the C500 System into cabinets. Dimensions 17- 1/2 " 44.45cm 4- 5/8 " 1 1.75cm 6" 15.24cm 17" 43.18cm 18- 3/8 " 46 ...

  • McIntosh C500C - page 7

    7 Dimensions 17- 1/2 " 44.45cm 4- 5/8 " 1 1.75cm 6" 15.24cm 17" 43.18cm 18- 3/8 " 46.67cm 3/16 " 0.48cm 4- 13/16 " 12.22cm 1- 3/8 " 3.49cm 13- 1/4 " 33.65cm 17- 1/16 " 43.34cm Front V iew of the C500P Rear V iew of the C500P Side V iew of the C500P 5- 3/8 " 13.69cm 13/16 " 2.06cm 3" 7 ...

  • McIntosh C500C - page 8

    8 Dimensions, con’t 17- 1/2 " 44.45cm 4- 5/8 " 1 1.75cm 6" 15.24cm 17" 43.18cm 18- 3/8 " 46.67cm 3/16 " 0.48cm 4- 13/16 " 12.22cm 1- 3/8 " 3.49cm 13- 1/4 " 33.65cm 17- 1/16 " 43.34cm Front V iew of the C500T Rear V iew of the C500T Side V iew of the C500T 5- 3/8 " 13.69cm 13/16 " 2.06cm ...

  • McIntosh C500C - page 9

    9 The C500C, C500P and C500T can be placed upright on a table or shelf, standing on their four feet. The four feet, may be removed from the bottom of the C500C, C500P and C500T when they are custom installed as outlined below . The four feet, together with the mounting screws should be retained for possible future use if the C500C, C500P and C500T ...

  • McIntosh C500C - page 10

    10 Notes ...

  • McIntosh C500C - page 11

    11 Rear Panel Connections Rear Panel Connections The identification of Rear Panel Connections for the C500 Controller , C500 Preamplifier and C500 T ube Preamplifier are located on separate folded sheets contained in the Owner ’ s Manual Packet. C500 Controller C500 Preamplifier C500 T ube Preamplifier Refer to folded sheet “ Mc1A ” C500 Cont ...

  • McIntosh C500C - page 12

    12 This page contains information for connecting the McIntosh C500C to the C500P or C500T and to other audio compo- nents. The C500 has the ability to automatically switch power On/Off to McIntosh Source Components via the Power Control Connections. The Data Port Connections allow for the remote operation of basic functions using the C500 Re- mote ...

  • McIntosh C500C - page 13

    13 19. Connect Cables from the External Sound Processor Left and Right Outputs to the C500 Preamplifier PROCES- SOR FROM LEFT and RIGHT Input Jacks. 20. Connect Cables from the Music Server Left and Right Outputs to the C500 Preamplifier Unbalanced SR VR (4) LEFT and RIGHT INPUTS Jacks. 21. Connect Cables from the Music Server Left and Right Inputs ...

  • McIntosh C500C - page 14

    14 C500 Controller Front Panel Controls, Displays, and Push-Buttons BALANCE Control allows the adjustment of the relative volume levels for each channel and is used for setup functions RECORD Switch selects the program signals that are available to record from and is used for setup functions LISTEN Switch selects the program signals that are listen ...

  • McIntosh C500C - page 15

    15 HEADPHONES jack accepts dynamic headphones METER indicates the Preamplifier’s Right Channel relative Out- put Level METER indicates the Preamplifier ’ s Left Channel relative Output Level C500 Preamplifier and C500 T ube Preamplifier Front Panel Displays and Jack HEADPHONES jack ac- cepts dynamic headphones METER indicates the Preamplifier ? ...

  • McIntosh C500C - page 16

    16 Figure 6 2. Press the C500C Front Panel SETUP push-button once. The LED above the SETUP Push-button will illuminate and the Front Panel Display will indicate CONTROL- LER. The “Controller” is the first of the two main menus. The second main menu is named “Preamp” and will be accessed in step 5. Refer to figures 2 and 5. 3. Rotate the BAL ...

  • McIntosh C500C - page 17

    17 Figure 7 The following listings indicate the Setup Menu Mode (Con- troller or Preamp), Menu Name, Default Setting and the page number for instructions on how to change a setting. Default Settings Menu Function Name Setting Page No. Control V ersion (C500 Firmware) _ . _ _ 17 Control Display (Brightness) 7 17 Control Remote (Control) HR061 17 Con ...

  • McIntosh C500C - page 18

    18 Meter Illumination Figure 11 The Front Panel Meter Illumination of the C500P or C500T Preamplifiers may be switched Off. Follow the steps below: 1. Press the SETUP Push-button once to access the Setup Controller Mode unless the C500C is already in the Setup Controller Mode. 2. Rotate the MENU Control until the words “METER ON” appears. Refer ...

  • McIntosh C500C - page 19

    19 Figure 16 The Rear Panel T rigger B Jack can provide either a 5 or 12 V olt Output when activated, with 5 V olts as the default. McIntosh Components with Power Control utilize 5 V olts; non-McIntosh components when connected to the C500C might required a higher voltage to switch them On or Off. T o change the output voltage to 12 volts follow th ...

  • McIntosh C500C - page 20

    20 Dat a Port Assigment The Data Control Ports on the C500 Controller by default are assigned to control just one input (1 thru 7) on the Preamplifier . In the following example there are two McIntosh CD Players, one connected to the CD Balanced Input number 6 and the other CD Player connected to the CDR Unbalanced Input number 5 on the Preamplifie ...

  • McIntosh C500C - page 21

    21 Setup, con’t 3. Rotate the SELECT 1 Control until the desired Input T itle to be changed appears in the Display , e.g. “D POR T CDR 5”. Refer to figure 29. 4. Rotate the SELECT 2 Control until the number 2 ap- pears in the Display , e.g. “D POR T CDR 6”. Refer to figure 30. Note: Connect a 1/8 inch S tereo Mini “Y” adapter to Data ...

  • McIntosh C500C - page 22

    22 Accessory Control When the T rigger A or B Power Control Outputs on the C500 Controller are used, one of the T riggers may be as- signed to switched On or Off by using the ACCessory Push- button on the supplied Remote Control. T o select either T rigger A or B for remote operation, perform the following steps: 1. Press the SETUP Push-button twic ...

  • McIntosh C500C - page 23

    23 Listen Processor The C500 Preamplifier has a Listen Processor Loop for connecting an external sound processor . The Listen Proces- sor may be assigned to be active for only those Inputs de- sired. T o activate the Listen Proccessor Loop and assign Inputs, perform the following steps: Note: If the Listen Pr ocessor is set active for a given Input ...

  • McIntosh C500C - page 24

    24 The C500 allows the adjustment of the Moving Magnet Ca- pacitive Loading to accommodate a wide variety of car- tridge types and turntable/cabling combinations. The range of adjustment is from 50pf to 750pf in 50pf increments. T o change the capacitance from the default value of 50pf set- ting perform the following steps: 1. Press the SETUP Push- ...

  • McIntosh C500C - page 25

    25 Setup, con’t and Setup Settings Chart s Nu m b e r D e faul t Ti tle N e w Ti tle T r im Le ve l D e fa ul t Da t a Po r t N e w D at a Po r t T r ig g e r S e le ct (A or B ) L i sten P ro c es so r ( O N o r OFF) Re c o r d P ro c esso r ( ON o r OFF) P a sst h ru Input 1D V D 1 2A U X 2 3T U N E R 3 4S R V R 4 5C D R 5 6C D 6 7D / A 7 8M M ...

  • McIntosh C500C - page 26

    26 Remote Control Push-Buttons Selects one of the seven High Level Audio/V ideo Sources or Phono Input T urns AC Power ON or OFF to certain McIntosh Components when connected via the Data Port Adjusts the volume level up or down Selects Disc Player , Mu- sic Server or T ape Re- corder Functions and also performs various func- tions on a variety of ...

  • McIntosh C500C - page 27

    27 automatic brief audition of each of the presets stored in the tuner memory . Press +10 a second time to stop on a station preset and exit the Review process. V olume Press the Up S or Down T VOLUME Push-button to raise or lower the listening volume level. Note: The Recor d Signals present at CDR and SRVR OUTPUTS ar e not affected by volume chang ...

  • McIntosh C500C - page 28

    28 How to Operate the C500 Power On The Red LED above the ST ANDBY/ON push-button lights to indicate the C500 is in Standby mode and is connected to a live AC Outlet. T o switch On the C500, press the ST ANDBY/ON push-button. Refer to figure 64. The Al- phanumeric Display will indicate the last input listened to. If this is the first time the C500 ...

  • McIntosh C500C - page 29

    29 How to Operate the C500 RECORD Selector has stopped. Refer to figure 66. Note: When the McIntosh MDA1000 is connected to the C500 Contr oller (refer to page 12) and the “D/A Contr ol” is active (refer to the Setup Contr oller Mode page 19) the LISTEN Contr ol and the INPUT Push- buttons ( W and X ) on the Remote Contr ol will step thru the a ...

  • McIntosh C500C - page 30

    30 4. T o listen to the playback of the program source just re- corded, rotate the LISTEN Control to the desired input. Note: The C500 RECORD OUTPUTS ar e not affected by the VOLUME or BALANCE Contr ols. T o listen to a differ ent program sour ce while recor ding, turn the LISTEN Contr ol to the desired sour ce. The r ecor ding pr ocess will not be ...

  • McIntosh C500C - page 31

    31 How to Operate the C500, con’t Trim Funct i on A dj us tme nt Figure Nu m b e r s I nput V ol um e T r i m + 6 dB to - 6 dB 7 5 a a nd b B a la n c e L e v e l (L e ft )107d B t o (Rig h t )107d B 76 Mono ( S ter eo) O n or O f f 7 7 a a nd b S pea k er 1 O n or O f f 7 8 a a nd b S pea k er 2 O n or O f f 7 9 a a nd b D i s p l ay 1 - 7 8 0 a ...

  • McIntosh C500C - page 32

    32 Figure 87 Figure 85 Figure 89 Figure 91 Figure 88 Figure 90 Reset of Micropr ocessors In the event that the controls of the C500 stop functioning press and hold the ST ANDBY/ON Push-button. Three to four seconds later the Front Panel Alphanumeric Display will indicate “DETECT SYSTEM”; at this point release the ST ANDBY/ON Push-button. This w ...

  • McIntosh C500C - page 33

    33 T echnical Description McIntosh Laboratory , the company who introduced the world’ s first amplifier that could be called “High Fidelity”, has done it again. The McIntosh Engineering S taff has cre- ated a Preamplifier without compromise, using the most ad- vanced McIntosh circuit design concepts. The C500 is the third generation of a two ...

  • McIntosh C500C - page 34

    34 Figure 98 balance and freedom from control noise. The V olume Control on the Front Panel of the C500 is actually a special digital optical encoder . As the V olume Control is rotated, a beam of Infra Red Light is picked up by two in- ternal sensors as a series of digital pulses. Refer to figure 97. The number of and time between pulses are count ...

  • McIntosh C500C - page 35

    35 to the unbalanced Inputs of the C500 are first converted to a balanced signal before they are amplified. In a similar man- ner the balanced audio signals are converted to unbalanced signals before they are available to the unbalanced outputs jacks. Moving Coil Pr eamplifier One of the popular types of Phono Cartridges for T urn- tables used toda ...

  • McIntosh C500C - page 36

    36 Figure 104 problems electrically . By developing electronic circuits the meters are made to respond to short intervals with an accu- racy of 95%! T o permit the eye to see such high speed mo- tion, the electronic circuits that drive the meter pointer are time stretched. Special logarithmic circuitry allows the meter to indicate a 60dB plus range ...

  • McIntosh C500C - page 37

    37 Frequency Response +0, -0.5dB from 10Hz to 40,000Hz T otal Harmonic Distortion 0.002% maximum from 20Hz to 20,000Hz Signal T o Noise Ratio High Level, 100dB Phono, 88dB Maximum V oltage Output 12V RMS Unbalanced (Spkr1 and Spkr2 Outputs) 25V RMS Balanced (Main, Spkr1 and Spkr2 Outputs) Output Impedance 220 ohms (Unbalanced and Balanced Outputs) ...

  • McIntosh C500C - page 38

    38 Specifications C500 Controller General Specifications Power Requirements 100 V olts, 50/60Hz at 75 watts 1 10 V olts, 50/60Hz at 75 watts 120 V olts, 50/60Hz at 75 watts 220 V olts, 50/60Hz at 75 watts 230 V olts, 50/60Hz at 75 watts 240 V olts, 50/60Hz at 75 watts Note: Refer to the r ear panel of the C500 Controller for the corr ect voltage. O ...

  • McIntosh C500C - page 39

    39 Packing Instructions Quantity Part Number Description 1 033838 Shipping carton only 4 033837 End cap 1 033836 Inside carton only 1 034414 T op pad (foam) 1 034301 Bottom pad 4 017937 Plastic foot 4 400159 #10-32 x 3/4” screw 4 404080 #10-7/16” Flat washer Packing Instructions In the event it is necessary to repack the equipment for ship- men ...

メーカー McIntosh カテゴリー Receiver

McIntosh C500Cのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- C500Cの取扱説明書
- McIntoshの製品カード
- パンフレット
- またはMcIntosh C500Cの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、McIntosh C500Cの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、McIntosh C500Cの取り付け説明書、サービスマニュアル、簡易説明書、またはMcIntosh C500Cのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、McIntosh C500Cの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

McIntosh C500Cデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMcIntosh C500Cを使用するのを助ける技術的文書のことです。説明書は通常、全てのMcIntosh C500Cユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

McIntoshの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. McIntosh C500Cの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMcIntosh C500Cの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。McIntosh C500Cに関してこのドキュメントで見つけることができる全てのヒントの目次
3. McIntosh C500Cデバイスの基本機能を使うにあたってのヒント。 McIntosh C500Cのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。McIntosh C500Cに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMcIntosh C500Cのメーカー/サービスへの連絡先に関する情報。

McIntosh C500Cについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもMcIntosh C500Cの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMcIntosh C500Cで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)