CDA HG6300の取扱説明書

24ページ 関係なし
ダウンロード

ページに移動 of 24

Summary
  • CDA HG6300 - page 1

    Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www .cda.eu hg6300 , hg6310 & hg6320 Gas Hobs Manual for Installation, Use and Maintenance ...

  • CDA HG6300 - page 2

    2 Important The manufacturer cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that we reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance. This appliance is not designed to be used by people (includi ...

  • CDA HG6300 - page 3

    3 safety (L VD) and Electromagnetic interference compatibility (EMC). Parts intended to come into contact with food conform to EEC/89/109 . IMPORT ANT INFORMA TION FOR CORRECT DISPOSAL OF THE PRODUCT IN A CCORD ANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must be taken to a special local authority waste collection ...

  • CDA HG6300 - page 4

    4 • This hob (Class 3) has been designed for use only as a cooking appliance. Any other use (e. g. heating rooms) should be considered incorrect and potentially dangerous. • These instructions are valid only for the countries of destination, the symbols of which appear on the cover and on the appliance. ...

  • CDA HG6300 - page 5

    5 Using Y our Hob Fig. 1 Gas burners: Gas flow to the burners is controlled by the control knobs (5, 6, 7 and 8 on the diagrams on pages 6 & 7). There are 3 positions shown on the control panel. T urning the control knob to the positions shown below achieves the following: Closed (OFF position) Maximum position: Provides fast boiling function ...

  • CDA HG6300 - page 6

    6 g hg6300 Fig. 2 hg6310 Fig. 3 3 3 3 3 2 1 4 4 5 6 7 8 5 6 7 8 ...

  • CDA HG6300 - page 7

    7 K ey to Figs 2, 3 & 4 Gas burners: 1. T riple burner 3.5k W 2. R apid burner 3. 0k W 3. Semi-Rapid burner 1. 75k W 4. Auxiliary burner 1. 0k W Control panel: 5. Front left burner control knob 6. Back left burner control knob 7 . Back right burner control knob 8. Front right burner control knob These appliances are class 3 hg6320 Fig. 4 3 1 4 ...

  • CDA HG6300 - page 8

    8 Igniting the Burners The hob is fitted with a flame failure device. Flame failure devices operate by shutting o the supply of gas to the burner in the event that the flame is extinguished accidentally . T o ignite the burners, follow these instructions: 1. Lightly press the control knob down and turn the knob anticlockwise to the maximum po ...

  • CDA HG6300 - page 9

    9 Fig. 6 Ecient Use of Y our Hob The hob is equipped with burners of dierent sizes, designed to accommodate most shapes and sizes of pan. For best results, only use pans with flat bottoms and choose an appropriate burner depending on the size of the pan. The most ecient use of the hob is shown below , where the pan and burner are correctl ...

  • CDA HG6300 - page 10

    10 Correct Use of the Optional W ok P an Adaptor (hg6310 & hg6320 only) The wok pan adaptor is a special stand that is designed to be fitted over the triple ring burner to give support to round bottomed woks. When using a wok, always place the wok pan adaptor in position over the pan support on the triple ring burner as shown in Fig.5. IMPORT ...

  • CDA HG6300 - page 11

    11 Care and Maintenence As the hob has a stainless steel or enamel surface, you should use a nonabrasive cleaner . Any abrasive cleaner (including Cif ) will scratch the surface and could erase the control panel markings. Stainless steel can be eectively cleaned by simply using a dilute solution of water and mild detergent and drying to a shine ...

  • CDA HG6300 - page 12

    12 T otal rated gas input : 7 .5kW (hg6300) 8. 0kW (hg6310 & hg6320) Mains electrical voltage: 230 – 240V ac, 50Hz T otal rated electrical consumption: <1W If Y our Hob is Not W orking 1. Check that the mains supply has not been switched o . 2. Check that the fuse in the spur has not blown. 3. Ensure that the burner components are not e ...

  • CDA HG6300 - page 13

    13 Mains Electricity Connection THIS APPLIANCE MUST BE CONNECTED T O THE MAINS SUPPL Y B Y A COMPETENT PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWIT CHED FUSE SPUR OUTLET AND PROTECTED B Y A 3A FUSE. W e recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E. T ...

  • CDA HG6300 - page 14

    14 Gas Supply R equirements IMPORT ANT : THIS APPLIANCE SHOULD BE FITTED B Y A GAS SAFE REGIS TERED FITTER OR OTHER SUIT ABL Y QU ALIFIED PERSON. •  ThisinstallationmustcomplywiththeGasSafety(installationand use) R egulations 1984. •  ThisapplianceiscategoryII2H3+andisdesigned ...

  • CDA HG6300 - page 15

    15 Room V olume (m 3 ) 5 6 to 10 6 to 11 11 or more Air V ent Required (cm 2 ) 100 50 No permanent vent required if a door opens to the outside None required V entilation All rooms require a window or equivalent (e.g. a door) which can be opened. Some rooms require a permanent vent in addition to a win- dow (see below). This unit must not be used i ...

  • CDA HG6300 - page 16

    16 Natural Gas to LPG Conversion This hob can be converted from natural gas to propane operation at a nominal inlet pressure of 37mbar , or butane operation at a nominal inlet pressure of 28/30mbar . This conversion must only be carried out by a competent person (i.e. a Gas Safe registered fitter). Instructions to t replacement injectors: 1. Di ...

  • CDA HG6300 - page 17

    17 LPG to Natural Gas Conversion This hob can be converted from propane operation at a nominal inlet pressure of 37mbar or butane operation at a nominal inlet pressure of 28/30mbar to natural gas at 20mbar . This conversion must only be carried out by a competent person (i.e. a Gas Safe registered fitter). R equired: •7mmAFnutspin ...

  • CDA HG6300 - page 18

    18 Fitting the Hob Unpacking the hob: T ake care not to lose or mishandle any parts. Fitting position of the hob: This appliance must be installed a minimum of 50mm from any back wall and a minimum of 150mm away from any adjacent vertical surfaces, e.g. a tall cupboard end panel. This may be reduced to 100mm if the adjacent surface is resistant to ...

  • CDA HG6300 - page 19

    19 Fig. 11 15mm V entilation slot > 30mm withstanding temperatures 65°C above ambient or greater (typically 80-90°C). •  If there is no oven to be built in below the hob it is recommended that, an isolation shelf should be fitted to protect the user from high temperatures. If the hob is to be installed above a working drawer , then a ...

  • CDA HG6300 - page 20

    20 2. Position the hob seal, as shown in the diagram below (Fig. 14), ensur - ing that the ends meet without overlapping. Do not use silicone type sealant. 3. Secure the hob to the worktop using the fixing brackets and screws supplied, as shown in the following diagram (Fig. 15). R emove any ex cess sealant after tightening the brackets. 400mm 750 ...

  • CDA HG6300 - page 21

    21 NO TES: ...

  • CDA HG6300 - page 22

    22 NO TES: ...

  • CDA HG6300 - page 23

    23 E & O E. All instructions, dimensions and illustrations are provided for guidance only . CDA reserve the right to change specifications without prior notice. NO TES: ...

  • CDA HG6300 - page 24

    Please contact our Customer Care Department for Service on the details below Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www. cda.eu © CDA 2014 ...

メーカー CDA カテゴリー Stove

CDA HG6300のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- HG6300の取扱説明書
- CDAの製品カード
- パンフレット
- またはCDA HG6300の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、CDA HG6300の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、CDA HG6300の取り付け説明書、サービスマニュアル、簡易説明書、またはCDA HG6300のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、CDA HG6300の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

CDA HG6300デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCDA HG6300を使用するのを助ける技術的文書のことです。説明書は通常、全てのCDA HG6300ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

CDAの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. CDA HG6300の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCDA HG6300の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。CDA HG6300に関してこのドキュメントで見つけることができる全てのヒントの目次
3. CDA HG6300デバイスの基本機能を使うにあたってのヒント。 CDA HG6300のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。CDA HG6300に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCDA HG6300のメーカー/サービスへの連絡先に関する情報。

CDA HG6300についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCDA HG6300の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCDA HG6300で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)