ページに移動 of 58
3G Wireless-N Travel Router USER GUIDE ...
NO TICE This document contains proprietary info rmation protected by copyright, and this Manual and all the accompanying hardw are, software, and documentation are copyrighted. No part of this document may be photocopied or reproduced by mechanical, electronic, or other means in any form. The manufacturer does not warrant that the hardware will wor ...
MENT Contents Chapter 1. Installing the 3G W ireless-N Travel Router ......................................... .......5 Package Contents .................................................................................................. 5 System Requirements ............................................................................................ ...
The Miscellaneous Page ............................................................................. 41 Configuring Security Settings ..................................................................... 42 The S tatus and Packet Filters Pages ............................................................ 42 The Domain Filters Page .................. ...
1 Installing the 3G Wireless-N Travel Router Package Contents The Zoom 3G Wireless-N T ravel Router package contains the Zoom 3G Wireless-N T ravel Router , a Li-ion battery , an RJ-45 Ethernet cable, a 5V 2.0A Power adapter , a Quick S tart installation manual, and a CD that cont ains additional documentation and warranty information. If anything ...
Powering Your Router If the Zoom 3G Wireless-N T ravel Router ’s batte ry is charged, you can use the router without plugging it into AC power . After being fully charged, the battery will typically power the 3G router for 3 hours or more, depending on how actively you’re using 3G and wireless n/g/b. When you’re not using the router , you sho ...
Using Your Router with a 3G Modem or Other Devices 1 Plug your 3G USB modem into the router's USB port. 3G modem plugged into USB port 2 Optionally, connect the power adapter to the POWER jack on the back panel of your rout er and plug the othe r end of the power ad apter into a wall outlet or p ower strip. ON/OFF switch POWER jack Note : If t ...
4 A computer, mo bile phone, game stat ion, or other device with wireless 802.11n, g, or b capability can access the I nternet wirelessly through the 3 G router. The router comes set up for wireless with no security. If that’s okay, you simp ly need to go to the wireless network setup in your device, and there you need to attach to the Zoom netwo ...
2 Using the Configuration Manager Y our wireless-N travel router is preset with default values that meet the needs of most users. However , you can change these settings using the ro uter's built-in Configuration Manager . This chapter includes: • Instructions for launching the Configuration Manager program • A description of the available ...
4 On the T oolbar , type admin (the default password) in the System Password field, then click Login . Note : Later, if you change the System Pas sword , you will use the new password to log in. When you log in, the Configuration Manager opens it s Main Menu , where you can select the Setup Wizard or the Advanced configuration program to tailor the ...
3 Using the Configuration Manager's Setup Wizard If you are not experienced with wireless devices and their configuration, you can use the Configuration Manager's Setup Wizard program to change the router's default settings. This chapter includes: • Suggestions for default settings that you might want to change • Instructions for ...
The Setup Wizard page opens. Each of the six Steps guides you in configuring a specific setting or group of settings. When you click Next or Back , you move from one step to another . Step 1. Setup Login T o view or change configuration settings, you must enter a p assword. Y our router has a default password ( admin ) that was set by the factory a ...
1 T o set the time zone, select the time zone that a pplies to your locale from the dropdown menu, then click Next . Step 3. WA N T ype Setup The W AN T ype refers to the protocol used by your Internet Service Provide r in establishing your Internet connection. By default, W AN T ype is set to your 3G USB modem, a wireless cellular connection. Conf ...
• PPPoE - Choose this type if your ADSL connection uses P PPoE. • PPTP - The Point to Point Tunneling Protocol is more common in corporate environments and most users will not use this se tting. • L2TP - The Layer 2 Tunneling Protocol is more common in corporate environments and most users will not use this se tting. • 3G Cellular Modem - S ...
• Static IP Addres s This is the IP address that is given to you by your servic e provider when you sign up for a S tatic IP address. This addr ess identifies your 3G Wireless-N T ravel Router when seen from the Internet. • Static Subnet Mask This is the router's subnet mask . Y our service provider supplies this address, • Stat ic Gate ...
• Host Name This is the name that identifies your 3G Wireless-N Travel Router . Some service providers require a host name. Y our service provider supplies this name, if needed. • ISP registered MAC Address This is the 12-digit M edia A ccess C ontrol ( MAC ) address of your router . Click the Clone button to get the MAC address that was regist ...
• Secondary DNS This is the IP address of an alternate Domain Name System (DNS) server . Y our service provider supplies this address, if needed. • Service Name This is the name assigned by your servic e provider to identify your service. The Service Name is optional. • Assigned IP Address This is the optional IP address assigned by your serv ...
• My Subnet Mask This is the private subnet mask that y our service provider assigned to your router . • Gateway IP This is the IP address of the service prov ider's server . Y our service provider supplies this address. • Server IP Add ress/Name This is the name and IP address of the PPTP server . Y our service provider supplies this in ...
• Subnet Mask This is the router's subnet mask. Y our service provider supplies this address. • W AN Gateway IP This is the W AN Gateway IP address of the L2TP server . Y our service provider supplies this address. • Server IP Add ress/Name This is the name and IP address of the L2TP server . Y our service provider supplies this informat ...
• PIN This is the P ersonal I dentification N umber ( PIN ) code assigned by your service provider , if needed. • Dialed Number This number is assigned by your service provider , if needed. • Account This is the Account Name provided by your service provider, if needed. • Password This is the Password assigned by your service provider , if ...
TIP : Other wireless networks might be within range of your network. Your neighbors, for instance, may be within range. If possible, there should b e at least a five-channel difference between your network and neighboring networks with strong signals. Having less than a five-channel difference may result in interference with your connection. Wirele ...
WP A-PSK/WP A2-PSK Authentication We recommend this setting if all devices on your network support either WP A or WP A2. Y our router will automatically detect whether is should use WP A or WP A2. When you select WP A-PSK/WP A2-PSK from the Authentication dropdown menu, the Encryption field expands, as shown in the following figure. Field Entry Aut ...
Field Entry Authentication Select WEP Encryption Select WEP If all the wireless devices in the network are Zoom product s, select Hex . Otherwise, select AS CI I . Although Zoom products support both Hex and AS CI I , we recommend using Hex . Encryption WEP Key 1, 2, 3, 4 If you selected Hex format and you chos e a 128-bit key length, 26 hexadecima ...
1 T o edit your entries, click Back as many times as needed to access the p age for the field(s) to be edited, then click Next to continue with your edits or to return to the updated Summary page. 2 T o test the updated configuration on your network, click the checkbox next to Do you want to proceed with the network testing ? 3 T o use the Ethernet ...
4 Wireless and Wireless Security Setup Y our 3G Wireless-N T ravel Router's default (factory) settings provide no wireless network security . If you don't want unauthorized wireless access to your network, we recommend that you enable wireless network security . T o do this, you'll need to configure the router and each device on your ...
Method T w o Use this method if your client device already has a WPS PIN number . The client is the Enrollee . 1 If you haven't already done so, open a Web browser and type http://192.168.1.1 in the address bar. 2 When the Co nfiguration Manager launches, log in as admin , then select Advanced > Basic Settings > Wireless to o pen the Wir ...
Configuring Wireless Security Manually WP A2/WP A Configuration W i-Fi P rotected A ccess ( WP A ) is an encryption method that offers a stronger security standard than WEP . Important! If you choose to configure your router using either WPA2 or WPA encryption, then you must configure all devices on your wireless network with the same WPA encryptio ...
Field Entry Wireless Mode Accept the default, B/G/N mixed if the client devices on your net work use various wireless standards. Other wise, select the wireless standard used by all wireless devic es on your network. Having a single standard will speed up the wireless throughput. Authentication Select WPA-PSK/WPA2 PSK if your devices support both a ...
Field Entry Wireless Module Accept the default, Enable . Click the Disable checkb ox only if you do not want wireless clients to access your net work. Network ID (SSID) Refers to the S ervice S et Id entifier for your device. By default, the SSID for the 3G Wireless-N Travel Router is Zoom . You can change the SSID to a name of your choice. The SSI ...
Click the WPS Setup button to launch the WPS program . Please refer to WPS Configuration on page 25 for more information. 3 0 3 G W i r e l e s s - N T r a v e l R o u t e r U s e r G u i d e ...
5 Using the Configuration Manager's Advanced Program Most users will not need to manually set up their router but if you do, you can use the Configuration Manager's Advanced program to change the router's default settings. This chapter includes: • Suggestions for settings that you might want to change • A brief description of the ...
• Y ou want to connect the router to your ADSL or cable modem, using your 3G modem as a backup Internet connection. See The Basic Setup Page ( 3G Failover ) on page 33 for details. • Y ou want to set up QoS on your router . See The QoS Page on page 48 for details. • Y ou want to back up router settings that you made using the Configuration Ma ...
7 On the Basic Settings p age, click one of the T oolbar buttons ( Basic Settings, Forwarding Rules, Security Settings, Advanced Setting s , or T oolbox ). The corresponding window opens. Each window cont ains a description of the configuration options at center and a configuration menu on the lef t pane. Configuring Basic Settings The Basic Settin ...
• Ethernet po rt configuration Set to LAN by default. Y ou can change this to WA N , Auto , or Off to disable the Ethernet port. Accept the default if you are using a 3G W AN T ype protocol; otherwise, select WA N . Use Auto if you want the router to detect if the Ethernet connection is W AN or LAN. Off disables the Ethernet port and is not recom ...
• Authentication Set to Auto , by default. Optionally , click P assword A uthentication P rotocol ( PA P ), or C h allenge H andshake A ut hentication P rotocol ( CHAP ), if supported by your service provider . • Primary DNS and Second ary DNS Identifiers for the D omain N ame S ervers. These identifiers are provided by your service provider . ...
• Wireless Module Accept the default, Enable . Click the Disable checkbox only if you do not want wireless clients to access your network. • Network ID ( SSID ) Refers to the S ervice S et Id entifier for your device. By default, the SSID for the 3G Wireless-N T ravel Router is Zoom . Y ou can change the SSID to a name of your choice. The SSID ...
For WEP Authentication : Y ou can accept the default, WEP-Auto or select one of the available options . Select WEP-Open to use Open System authentication . Select WEP-Shared to use Shared Key authentication. For WP A-PSK/WP A2-PSK Authentication: Y ou can select WP A-PSK/WP A2 PSK if your devices support both authentication methods. Optionally , se ...
If you selected ASCII format , and you chose a 128-bit key length, 13 ASCII characters are required. W rite the 13-ASCII-character key in the sp ace below for future reference, and then enter it in the Key 1 box. — — — — — — — — — — — — — I f you selected ASCII format , and you chose a 64-bit key length, 5 ASCII characters ...
The V irtual Server Page Y ou can use the Virtual Server p age to configure a virtual server . Because your router's firewall filters out unrecognized packet s to protect your network, all computers behind this product are invisible to the out side world. If you want, you can make some of them accessible by enabling Vir tu al Ser v er mapping. ...
Schedule Rule and Rule Setting Pages on page 52 for more information. For example, if you have an FTP server ( port 21) at 192.168.1.5, a W eb server (port 80) at 192.168.1.6, and a game at 192.168.1.7, then you need, at minimum, to specify the following mapping. ID Service Port Server IP Enable 1 21 192.168.1.5 Y es 2 80 192.168.1.6 Y es 3 5000 19 ...
The Miscellaneous Page The Miscellaneous Page lets you set up and enable a DMZ Host on your network, and enable UPnP settings for sof tware and devices. In this way , specific ports can open fo r incoming traffic that must p ass through your firewall. • Set IP Address of DMZ Host A DMZ (De milit arized Zone) Host is a host without the protection ...
Configuring Security Settings The Security Setting page lists six configuration menus on the lef t pane and provides a description of the configuration menus at center . The St atus and Packet Filters Pages Y ou can use the Status page and the Packe t Filters page to control which p ackets are allowed or denied access. As shown on the Status page, ...
Filtering Policies Y ou can select one of the two filtering policies: • Allow all to p ass except those that match the specified rules • Deny all to pass except those that match the spe cified rules Filtering Rules Y ou can specify eight rules for each direction: inbound or outbound. For each rule, you can define the following: • Source IP ad ...
• Domain Filter Enable Check if you want to enable the Domain Filter . • Log DNS Query Check if you want to log the action when someone accesses the specific URLs. • Privilege IP Address Range Domain filtering rules do not apply to IP addresses in this range. • Domain Suffix The suffix of the restricte d URL; for example, xxx .com . • Act ...
• URL If any part of the W ebsite's URL matches the pre-defined word, the connection will be blocked. For example, you can use the pre-defined word, sex, to block all websites those URLs contain the pre-defined word, sex. • Enable Click the checkbox to enable each rule. The MAC Address Control Page Y ou can use the MAC Address Control page ...
• Association control Check Association control to specify which wireless clients can associate to the wireless LAN. If a client is not allowed to associate to the wireless LAN, then the client can't send or receive any dat a via this device. Choose allow or deny to indicate which clients can associate to th e wireless LAN. If selected, the ...
The System Log Page Y ou can use the System Log page to define how and where system logs will be exported via syslog (UDP) or SMTP(TCP). • IP Address for Syslogging Host IP address of the d estination where the Sys log will be sent. Click the Enable checkbox to set the IP Address as the destination. • E-mail alert settings Check Enable if you w ...
• SMTP Server IP and Port Input the SMTP server IP and port; for example, mail.your_url.com or 192.168.1.100:26 . If you do not specify a port number , the port value will be set to 25. • SMTP Username and Password Input the SMTP Username and Password. • E-mail addresses The email address of each syslog recipient. • E-mail Subject The subje ...
• QoS Control Click the Enable checkbox to enable QoS. • Available Upstream bandwidth Set the upstream speed. The best way to find your throughput is to use one of the free speed tests w idely available on the We b. Some examples of sites with good speed tests ar e www .speedtest.net and www .speakeasy .net/speedtest. When you now your actual u ...
• User Rule# Select a rule from the dropdown menu to indicate when the policy applies. (0) Always is the default value. The SNMP Page Y ou can use the S imple N etwork M anagement P rotocol ( SNMP ) page to set up the capability to remotely manage a computer network by polling and setting t erminal values and monitoring network events. • Enable ...
The Routing T able Page Y ou can use the Routing Ta b l e page to enable/disable both Dynamic and Static Routing . If routing is enabled, you can specify which physical interface address to use for outgoing IP dat a grams. If you have more than one router and subnet, you will need to define a routing t able that lets p ackets find the proper routin ...
• Time Zone Select the local time zone from the dropdown menu. • Auto-Synchronization Click the Enable checkbox to enable this function. Select an item from the Time S erve r dropdown menu to specify the server with which to synchronize. The default value is Auto . • Click Sync with Time Server to set Date and Time by NTP Protocol. • Click ...
2 Click Add New Rule to open the Schedule Rule Setting page. 3 On the Schedule R ule Setti ng page, specify a Rul e name, a Policy that defines whether the rule is Active or Inactive , Week Day and the Start Time a nd End Time for ea ch rule that you are creating. 4 Click Save for each rule that you create. 5 Click Back to return to the Sch edule R ...
6 Click Edit to mak e changes to a scheduled rule . 7 Click Delete to remove a scheduled rule. Configuring T oolbox Settings The T oolbox Settings page list s six configuration menus on the lef t pane and provides a description of the configuration menus at center . The System Information Page Y ou can use the System Information p age to view infor ...
The Firmware Upgrade Page Y ou can use the Firmware Upgrade page to get the most recent version of the router firmware, if available. 1 Click Browse to open the lo cation where you save d the Firmware Update file that you downloaded from the Z oom web site or received via email. 2 Click Upgrad e . The Backup Setting Dialog Y ou can back up your rou ...
1 Click OK to reset the router. We recommend that you b ack up and save your conf iguration first if you've made changes and want a record of that configuration The Reboot Dialog Y ou can reboot the router by clicking the Reboot item from the left p ane of the T oolbox menu. The following dialog opens. 1 Click OK to reboot the router. The Misc ...
Limited Warranty Zoom T elephonics, Inc. (hereinafter “Zo om”) warrant s this product against defects in materia l and workmanship for a warranty peri od of one year . The one year warranty may be extended only by Zoom as required by local law in the co untry where this modem is sold by Zoom. This warranty applies to the original end -user purc ...
Declaration of Conformity Déclaration de conformité Declaración de conformidad Manufacturer/Constructeur/Fabr icante Zoom Telephonics, Inc. 207 South Street Boston, MA 02111 USA 617-423-1072 www.zoom.com Brand/Marque/Marca Zoom 3G W ireless-N T ravel Router T ype/T yp/T ipo Series 1074, Model 4506, CDM530AM The manufacturer declares under sole r ...
Zoom 4506 Travel Routerのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 4506 Travel Routerの取扱説明書
- Zoomの製品カード
- パンフレット
- またはZoom 4506 Travel Routerの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Zoom 4506 Travel Routerの取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Zoom 4506 Travel Routerの取り付け説明書、サービスマニュアル、簡易説明書、またはZoom 4506 Travel Routerのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Zoom 4506 Travel Routerの製品を使用するにあたって最も人気のある説明書を閲覧できます。
Zoom 4506 Travel Routerデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがZoom 4506 Travel Routerを使用するのを助ける技術的文書のことです。説明書は通常、全てのZoom 4506 Travel Routerユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Zoomの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Zoom 4506 Travel Routerの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははZoom 4506 Travel Routerの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Zoom 4506 Travel Routerに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Zoom 4506 Travel Routerデバイスの基本機能を使うにあたってのヒント。 Zoom 4506 Travel Routerのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Zoom 4506 Travel Routerに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるZoom 4506 Travel Routerのメーカー/サービスへの連絡先に関する情報。
Zoom 4506 Travel Routerについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもZoom 4506 Travel Routerの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがZoom 4506 Travel Routerで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。