-
Sherwood DS-801 - page 1
DS-801 Stereo Cassette T ape Deck Stereo Cassetten-Recorder OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG ON/STANDBY PERSONAL COMPONENT SYSTEM/STEREO CASSETTE TAPE DECK DS-801 OPEN/CLOSE ...
-
Sherwood DS-801 - page 2
2 ENGLISH Introduction Congratulations on Your Purchase! Your new high fidelity Cassette Tape Deck is designed to deliver maximum enjoyment and years of trouble free service. Please take a few moments to read this manual thoroughly. It will explain the features and operation of your unit and help ensure a trouble free installation. Please unpack yo ...
-
Sherwood DS-801 - page 3
3 ENGLISH FOR U.S.A AND CANADA ........................120 V Units shipped to the U.S.A and Canada are designed for operation on 120 V AC only. Observe all safety precautions for use of a polarized AC plug. However, some products may be supplied with a non polarized plug. CAUTION : To prevent electric shock, match wide blade of plug to wide slot, i ...
-
Sherwood DS-801 - page 4
4 ENGLISH CONTENTS Introduction UNPACKING AND INSTALLATION .................................................................................................... .. 2 READ THIS BEFORE OPERATING YOUR UNIT .................................................................................. 3 Rear Panel Connections ........................................ ...
-
Sherwood DS-801 - page 5
5 ENGLISH Rear Panel Connections • Do not plug the AC input cord into the AC outlet when plugging and unplugging connection cords. • Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections with the supplied cords. • Refer to the connecting diagram in the operating instructions of Sherw ...
-
Sherwood DS-801 - page 6
6 ENGLISH Front Panel & System Remote Controls Front Panel Controls System Remote Controls SLEEP EDIT AUT O/MONO TUNING TUNE MODE PROGRAM AUX MD TUNER TAPE CD POWER 123 456 789 0 MEMO DOLBY C.RESET TIME REPEAT RANDOM EON RDS CD SYNC. REV .MODE SYSTEM REMOTE CONTROL UNIT (only for RX-801R) ON/STANDBY PERSONAL COMPONENT SYSTEM/STEREO CASSETTE TAP ...
-
Sherwood DS-801 - page 7
7 ENGLISH FLUORESCENT DISPLAY TAPE COUNTER DISPLAY RECORD INDICATOR TAPE DETECTION INDICATOR TAPE DIRECTION DISPLAY DOLBY B NR INDICATOR REVERSE MODE DISPLAY LEVEL METER DISPLAY CD SYNCHRO RECORDING INDICATOR WHEN USING THE SYSTEM REMOTE CONTROL UNIT OF RX-801R This unit can be remotely controlled with Sherwood system receiver RX-801R. • To liste ...
-
Sherwood DS-801 - page 8
8 ENGLISH NOTES ON CASSETTE TAPE Before Operation • Before loading a cassette tape, take up the slack in the tape to prevent it from becoming entangled around the capstan. • After the recording has been finished, remove the tab to prevent the recorded contents from being erased or recorded on accidently. • To rerecord after tabs have been rem ...
-
Sherwood DS-801 - page 9
9 ENGLISH Operations • To use the system remote control unit of Sherwood system receiver RX-801R, first connect the SYSTEM CONNECTOR jack of this unit to that of RX-801R.(Refer to the operating instructions of the RX-801R.) PLAYING BACK A TAPE In case of the tape recorded with Dolby B NR system, select the Dolby B NR mode. 3 Select the desired re ...
-
Sherwood DS-801 - page 10
10 ENGLISH • In case of forward playback(“ ”). • At the desired point, press the STOP or corresponding PLAY button. The automatic music search function automatically skips other musics, finds and starts playback from the desired music. Up to 99th music before or after the current music can be searched quickly on the current side. AMS(Automa ...
-
Sherwood DS-801 - page 11
11 ENGLISH • Be sure the erase-protection tabs on the tape are in place. • The type of tape(normal or chrome) is automatically detected. • The metal tapes are not recorded correctly. • ”B” lights up. Load a tape to be recorded. 1 RECORDING OPEN/CLOSE When recording with Dolby B NR system, select the Dolby B NR mode. 2 SLEEP EDIT AUT O/M ...
-
Sherwood DS-801 - page 12
12 ENGLISH To stop recording 8 EON RDS REMOTE CONTROL UNIT RM-404 or SYSTEM REMOTE CONTROL UNIT (only for RX-801R) SLEEP EDIT AU TO /MONO TUNING TUNE MODE PROGRAM MUTE TIMER VOL VOL AUX MD TUNER TAPE CD POWER 123 456 789 0 MEMO ENTER DOLBY C.RESET TIME REPEAT RANDOM CD SYNC. REV.MODE DISPLAY In the recording pause mode, press the corresponding PLAY ...
-
Sherwood DS-801 - page 13
13 ENGLISH • Because CD synchro recording will start from the front side, be sure the erase-protection tab of the front side. • Only when the both of the erase-protection tabs on the tape are in place, CD synchro recording can be performed on both sides. • When the SYSTEM CONNECTOR jack of this unit is connected to that of Sherwood system CD ...
-
Sherwood DS-801 - page 14
14 ENGLISH T roubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY No power No sound Distorted or abnormal sound Vibrating sound Too noisy No recording • The AC input cord is disconnected. • The POWER(ON/STANDBY) button is not pressed completely. • Unrecorded tape is loaded. • Incorrect connections. • Incorrect operation of the receiver. • ...
-
Sherwood DS-801 - page 15
15 ENGLISH Specifications Type ........................................................................................ Stereo full logic cassette deck wi th Dolby B NR system Track system .................................................................................................................. ........... 4-track, 2-channel stereo Recordin ...
-
Sherwood DS-801 - page 16
5707-21050-008-0 ...
Sherwood DS-801についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもSherwood DS-801の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSherwood DS-801で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。