Russound ST2の取扱説明書

28ページ 0.62 mb
ダウンロード

ページに移動 of 28

Summary
  • Russound ST2 - page 1

    ST2 Smar t T uner Dual AM/FM T uner INSTRUCTION MANUAL ...

  • Russound ST2 - page 2

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER - SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to a ...

  • Russound ST2 - page 3

    3 T ABLE OF CONTENTS Product Intr oduction ........................................................................................................... ..4-5 Component Guide ST2 Front Panel ................................................................................................................ ..6 ST2 Rear Panel ............................. ...

  • Russound ST2 - page 4

    4 INTRODUCTION DESCRIPTION Thank you for choosing the Russound ST2 Smart T uner . Whether you are upgrading a legacy radio, expanding a CAi Series system, or taking advan- tage of the CAV6.6’ s robust RNET™ communica- tion link, the ST2 T uner is as simple or as com- plex as your needs. The ST2 T uner is like having two radios in one. The two A ...

  • Russound ST2 - page 5

    5 INTRODUCTION A-BUS ® System - The ST2 T uner can be used in an A-BUS system with an audio distribution hub such as the A-H484 and IR-repeating keypads such as the A-KP2. The connections on the rear panel ar e designed to receive IR signals fr om a repeating system commonly used in A-BUS distributed audio systems. As with the CAi series installat ...

  • Russound ST2 - page 6

    6 COMPONENT GUIDE ST2 FRONT P ANEL MAIN POWER SWITCH - T urns power on and off POWER ON/OFF LED - Indicates power on or off REMOVABLE COVER LENS - Covers the selection buttons on the tuner BANK SELECT BUTTON - Selects bank 1-6 MEMORY SELECT BUTTONS - Selects memory pr esets 1-6 IR RECEIVER - Receives IR signal from r emote control LCD P ANEL - 12-c ...

  • Russound ST2 - page 7

    7 RS-232 INTERFACE IR LR A UDIO O UTPUT 12VDC 1.5A I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYP AD P ORTS T UNER 1 T UNER 2 FM C OAX L OOP A NTENNA FM C OAX L OOP A NTENNA Serial# MADE IN KOREA IR LR A UDIO O UTPUT RNET LINK IN/LINK OUT - Links to other Russound components that are RNET com- patible such as the CAV6.6, displays fr equen ...

  • Russound ST2 - page 8

    8 TUNE TUNE FAV 1 SEEK ST/ MONO LOC/ DX SEEK TUNE TUNER 1 TUNER 2 4 M E M B A N K 123 56 789 0 PWR MEM TUNE AM/FM FAV 2 OK POWER - Puts the tuner in/out of standby mode TUNER CONTROL - Select TUNER 1 or TUNER 2 and all subsequent button presses affect that tuner NUMERIC INPUT - Number buttons for direct selection BANK SELECT - Used for direct bank ...

  • Russound ST2 - page 9

    9 Power To power the tuner , connect the 12VDC external power supply to the unit by inserting the power supply jack into the power supply connection on the back panel. The ST2 T uner power commands are global. The ST2 component is powered on and off by toggling the power switch on the front of the tuner . The unit must be powered on befor e r eceiv ...

  • Russound ST2 - page 10

    10 ST2 SETUP AND CONNECTIONS ANTENNA CONNECTIONS Gr ounding an Outdoor Antenna If the tuner is used with an outdoor antenna, the anten- na must be grounded against static char ges and voltage sur ges. Consult the instructions that came with the antenna or contact the antenna manufacturer for proper installation instruc- tions. The adjacent dia- gra ...

  • Russound ST2 - page 11

    11 ST2 SETUP AND CONNECTIONS CONTROLLER/AMP CONNECTIONS 1 R L 2 1 R L 2 34 CA6 .4i NEWMARKET, NH U.S.A. ~110VAC ~220-240VAC ~50-60Hz 400W VOLTAGE 110V 220-240V FUSE F4A F2A K EYPAD P ORTS Z ONE P REAMP O UTPUTS 123456 O UTPUT T O 8 O HM S PEAKER 123456 ~110VAC ~220-240VAC IR EMITTERS WA RNING : SHOCK HAZARD – DO NOT OPEN AV IS : RISQUE DE CHOC EL ...

  • Russound ST2 - page 12

    12 + + ST2 T uner Side View R ack Ear Fro n t V iew Rack Ear Side View R ack Ear Screw Holes Rack Mount Installation The ST2 tuner can be mounted in a standard component rack using the rack ears pr ovided. Line the rack ear’ s two rows of scr ew holes with the three scr ew holes on the side of the tuner . Use the screws pr ovided to secure the ra ...

  • Russound ST2 - page 13

    13 Front Panel Operation Tu rning the unit on To turn the unit on, push the On/Off button up on the front panel. Pushing the On/Off button down turns the tuner off. Selecting the desired tuner From the fr ont panel, use the TNR SEL button to tog- gle between T uner 1 and T uner 2. A backlight shows behind the selected label TUNER 1 (green) or TUNER ...

  • Russound ST2 - page 14

    14 ST2 OPERA TION ST2-RC REMOTE CONTROL ST2-RC Remote Control Operation Tu rning the unit on To take the ST2 tuner out of standby mode, push PWR or any other button except TUNER 1 or TUNER 2. Selecting the desired tuner (Note: T o change the tuner that is audio-active, you must have some other system control in place to change the source) To contro ...

  • Russound ST2 - page 15

    15 ST2 OPERA TION UNO-S2 KEYP AD CONTROLS WITH CAV6.6 CAV6.6-UNO-S2 Keypad Operation NOTE: To control the ST2 Tuner through the UNO-S2 keypad, the tuner must be configured as a source using the CAV6.6 programming steps (see page 19) Tu rning the unit on The tuner is power managed by the CAV6.6 or other RNET -enabled controller . If the tuner is in ...

  • Russound ST2 - page 16

    16 ST2 OPERA TION UNO-S2 KEYP AD CONTROLS WITH CAV6.6 TUNER SELECTION - Select source number assigned to TUNER 1 or TUNER 2 FREQUENCY SELECT - Used for manual station selection, tune up or tune down AM/FM - Selects AM or FM band SEEK - Seeks the next higher tuned station (press) SCAN - Scans through tuned stations with 5-second preview befor e next ...

  • Russound ST2 - page 17

    17 UNO-LRC1 Remote Control Operation Tu rning the unit on The tuner is power managed by the CAV6.6 or other RNET -enabled controller . If the tuner is in standby mode, any button press of the UNO-LRC1 will bring the tuner out of standby mode. Selecting the desired tuner To select a tuner , push and choose the source number preassigned to T uner 1 o ...

  • Russound ST2 - page 18

    18 ST2 OPERA TION UNO-LRC1 REMOTE CONTROL WITH CA V6.6 POWER - Power managed by CAV6.6 NUMERIC INPUT - Number buttons for direct station input TUNE UP/DOWN - Incrementally scr olls through tuned stations TUNE UP/DOWN - Incrementally scr olls through tuned stations OK - Confirms numeric selection BANK UP/DOWN - Used for bank selection (press and hol ...

  • Russound ST2 - page 19

    19 NOTE: The CAV6.6 and UNO-S2 firmware must be version 2.00.01 or high- er to control the ST2 Tuner. Use the System Info menu of the CAV6.6 to check the firmware version. If the firmware is not version 2.00.01, go to the Document Center at www.russound.com to obtain the latest version. To Program the CAV6.6 to operate with the ST2 Tuner: When the ...

  • Russound ST2 - page 20

    20 ST2 TUNER PROGRAMMING PROGRAMMING FOR CA V6.6 USE Memory Name A memory preset must be cr eated and saved before it can be named. Once it is saved, the preset’ s T uner #, Bank # and Memory # must be entered in the following pr ocedure. 1. Enter the Setup Menu by pressing and holding the TNR SEL button. 2. MEMORY NAME appears on the tuner . 3. ...

  • Russound ST2 - page 21

    21 Press and Hold TNR SEL button TUNER # BANK # MEMORY # MEMORY NAME SA VE CHANGES? Memory Name Procedur e TNR SEL Selects character Selects character position Repeat for each character in name TNR SEL TNR SEL MEM NAME Procedure BANK NAME Procedure SOURCE NUM Procedure Setup Menu REGION Procedure FA C T ORY INIT Procedure UPDA TE FIRMW Procedure SY ...

  • Russound ST2 - page 22

    22 Bank Name A custom name can be assigned to each of the six banks of both T uner 1 and T uner 2. 1. Enter the Setup Menu by pressing and holding the TNR SEL button. 2. Press MEM Up/Down until BANK NAME appears on the tuner . 3. Press BAND. 4. Press the T une Up/Down buttons to select the T uner #. 5. Press BAND to advance. 6. Press the T une Up/D ...

  • Russound ST2 - page 23

    23 Press and Hold TNR SEL button Source Number , Region, F ac tor y Initialization, Update F irmware and S ystem Info Pr ocedures TNR SEL TNR SEL This Procedure returns the ST2 Tuner to its Factory settings MEM NAME Procedure BANK NAME Procedure SOURCE NUM Procedure Setup Menu REGION Procedure FA C TO R Y INIT Procedure UPDA TE FIRMW Procedure SYST ...

  • Russound ST2 - page 24

    24 ST2 TUNER PROGRAMMING ST2 TUNER SETUP MENU Region (continued) 1. Enter the Setup Menu by pressing and holding the TNR SEL button. 2. Press MEM Up/Down until REGION appears on the tuner . 3. Using the T une Up/Down buttons, view the US and Euro selections. 4. Press BAND to select the r egion. 5. Press TNR SEL to exit the Region menu. Factory Init ...

  • Russound ST2 - page 25

    25 ST2 Smart T uner Dimensions: 17"W x 8"D x 1.8"H (43 x 20.3 x 4.4 cm) W eight: 7 lbs. (3.2kg) Power Supply: 12VDC 1.5A Frequency Range: AM 522 - 1620 kHz FM 87.5 - 108.0 MHz FM Antenna impedance: 75 ohm unbalanced Impedance: 300 ohm AM Sensitivity @ S/N: 20dB 55 dBu Image rejection: 33dB S/N ratio: 45 dB FM Sensitivity @ S/N: 30 dB ...

  • Russound ST2 - page 26

    26 WARRANTY & REP AIR The Russound ST2 is fully guaranteed against all defects in materials and workmanship for two (2) years from the date of pur chase. During this period, Russound will replace any defective parts and correct any defect in workmanship without char ge for either par ts or labor . For this warranty to apply , the unit must be i ...

  • Russound ST2 - page 27

    27 NOTES ...

  • Russound ST2 - page 28

    Russound 5 Forbes Road, Newmarket, NH 03857 tel 603.659.5170 • fax 603.659.5388 e-mail: tech@russound.com www .russound.com E. & O.E. Copyright © 2003 Russound ® All rights reserved. REV . 1 28-1150 ...

メーカー Russound カテゴリー Stereo System

Russound ST2のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- ST2の取扱説明書
- Russoundの製品カード
- パンフレット
- またはRussound ST2の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Russound ST2の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Russound ST2の取り付け説明書、サービスマニュアル、簡易説明書、またはRussound ST2のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Russound ST2の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Russound ST2デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがRussound ST2を使用するのを助ける技術的文書のことです。説明書は通常、全てのRussound ST2ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Russoundの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Russound ST2の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははRussound ST2の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Russound ST2に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Russound ST2デバイスの基本機能を使うにあたってのヒント。 Russound ST2のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Russound ST2に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるRussound ST2のメーカー/サービスへの連絡先に関する情報。

Russound ST2についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもRussound ST2の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがRussound ST2で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)