-
Harbor Freight Tools 94071 - page 1
3” MINI T OOL GRINDER Model 94071 ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camar illo , CA 93011 Visit our W eb site at: http ://www .harborfreight.com Cop yright 2005 by Harbor F reight T ools ® . All rights reserv ed. No portion of this manual or any ar twork contained herein may be reproduced in any shape or form without ...
-
Harbor Freight Tools 94071 - page 2
PRODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this man ual for the saf ety warnings and precautions, assembl y , operating, inspection, maintenance and cleaning procedures , par ts list and assemb ly diagram. K eep y our in voice with this man ual. Write the in v oice number on the inside of the front cov e r . K eep this manual and in ...
-
Harbor Freight Tools 94071 - page 3
3. Keep b ystander s, children, and visitor s away while operating a po wer tool. Distractions can cause y ou to lose control. Protect others in the work area from debris such as chips and spar ks . Pro vide barr iers or shields as needed. ELECTRICAL SAFETY 4. Gr ounded tools m ust be plugg ed into an outlet properl y installed and gr ounded in acc ...
-
Harbor Freight Tools 94071 - page 4
11. Dress pr operly . Do not wear loose clothing or je welr y . Contain long hair . Keep y our hair , c lothing, and glo ves awa y from mo ving parts. Loose clothes , jewelry , or long hair can be caught in mo ving par ts . 12. A void accidental star ting. Be sure the P o wer Switch is off bef ore plug ging in. Carr ying power tools with y our fing ...
-
Harbor Freight Tools 94071 - page 5
21. Chec k f or misalignment or binding of moving par ts, breakage of par ts, and an y other condition that may affect the tool’ s operation. If damaged , h a ve the tool serviced before using. Ma n y accidents are caused by poor ly maintained tools. 22. Use onl y accessories that are recommended by the manufacturer f or y o ur model. Accessories ...
-
Harbor Freight Tools 94071 - page 6
9. Ne ver attempt to remo ve material stuck in the mo ving par ts of the Grinder while the tool is turned on, plug ged in, or running. 10. Use light pressure when star ting to grind. T oo m uch pressure on a cold Grinding Wheel (40) can cause the wheel to cr ack. 11. When replacing the Buffing Wheel (39) and/or Grinding Wheel (40), make sure each w ...
-
Harbor Freight Tools 94071 - page 7
W ARNING! Impr operly connecting the gr ounding wire can result in the risk of electric shock. Chec k with a qualified electrician if y ou are in doubt as to whether the outlet is pr operly grounded. Do not modify the power cor d plug provided with the tool. Ne ver remo ve the grounding pr ong fr om the plug. Do not use the tool if the power cord o ...
-
Harbor Freight Tools 94071 - page 8
3. Y our tool m ust be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the f ollowing illustration. (See Figure A.) FIGURE A DOUBLE INSULA TED T OOLS: T OOLS WITH TWO PR ONG PLUGS 4. T ools marked “Double Insulated” do not require grou ...
-
Harbor Freight Tools 94071 - page 9
EXTENSION CORDS 1. Gr ounded tools require a three wire extension cord. Doub le Insulated tools can use either a two or three wire e xtension cord. 2. As the distance from the supply outlet increases, you must use a hea vier gauge extension cord. Using e xtension cords with inadequately sized wire causes a ser ious drop in v oltage, resulting in lo ...
-
Harbor Freight Tools 94071 - page 10
FIGURE D SYMBOLOGY Double Insulated Canadian Standar ds Association Underwriters Laboratories, Inc. V olts Alternating Current Amperes No Load Rev olutions per Minute (RPM) n o xxxx /m in . A V ~ UNP ACKING When unpacking, chec k to mak e sure all the par ts sho wn on the Pa rts List on pag e 14 are included. If an y par ts are missing or brok en, ...
-
Harbor Freight Tools 94071 - page 11
SKU 94071 For tec hnical questions, please call 1-800-444-3353 P AGE 11 T o Attac h The Spark Shields: 1. A Spar k Shield (20) m ust be attached to both the Left Saf ety Guard Plate (17) and Right Saf ety Guard Plate (32). 2. T o do so , f or each Spar k Shield use tw o Philips Screws (18), two Flat W ashers (19), tw o Spr ing W ashers (22), and tw ...
-
Harbor Freight Tools 94071 - page 12
SKU 94071 For tec hnical questions, please call 1-800-444-3353 P AGE 12 through the wor kbench, making sure no hidden electric cords or cables are in the dr illing path. 5. Once the 3/16” mounting holes are drilled, align the four mounting holes at the Base (4) of the Gr inder with the f our predr illed mounting holes in the wor kbench. Secure th ...
-
Harbor Freight Tools 94071 - page 13
SKU 94071 For technical questions, please call 1-800-444-3353 P A GE 13 6. Once the grinding process is competed, tur n the P ow er Switch (7) of the Grinder to its “OFF” position. Do not press against the Buffing Wheel (39) or Grinding Wheel (40) to stop them from spinning. Allow the Wheels to completely stop on their o wn. Then, disconnect th ...
-
Harbor Freight Tools 94071 - page 14
PLEASE READ THE FOLLO WING CAREFULL Y THE MANUF A CTURER AND/OR DISTRIBUT OR HAS PR OVIDED THE P AR TS LIST AND ASSEMBL Y DIA GRAM IN THIS MANU AL AS A REFERENCE T OOL ONL Y . NEITHER THE MANUF ACTURER OR DISTRIB UT OR MAKES ANY REPRESENT A TION OR W ARRANTY OF ANY KIND T O THE B UYER THA T HE OR SHE IS QU ALIFIED TO MAKE ANY REP AIRS TO THE PRODUC ...
-
Harbor Freight Tools 94071 - page 15
ASSEMBL Y DIA GRAM NO TE: Some parts are listed and sho wn f or illustration purposes only , and are not a vailab le indivi dually as replacement par ts. SKU 94071 For technical questions, please call 1-800-444-3353 P A GE 15 34 35 28 27 36 37 38 39 37 37 40 38 37 41 42 27 28 34 18 19 20 15 9 12 33 22 21 32 23 31 26 30 29 26 25 24 23 22 21 17 9 14 ...
Harbor Freight Tools 94071についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもHarbor Freight Tools 94071の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHarbor Freight Tools 94071で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。