日本語 dropdown-ico

Jet DC-1100Gの取扱説明書

20ページ 1.88 mb
ダウンロード

ページに移動 of 20

Summary
  • Jet DC-1100G - page 1

    Operating Instructions and Parts Manual Dust Collector Model: DC-1100A/C/RC DC-1100A/RC DC-1100C/RC WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part No. M-708639 Ph.: 800-274-6848 Revision G 07/04 www.wmhtoolgroup.com Copyright © WMH Tool Group This Manual is Bookmarked ...

  • Jet DC-1100G - page 2

    2 This manual has been prepared fo r the owner and operators of JET DC-11 00 Series Dust Collectors. Its purpose, aside from machine operatio n, is to prom ote safety using accepted operatin g and maintenance procedures. To obtain maximum life and efficiency from your du st collector and to aid in using it safely, please read this manual thoroughly ...

  • Jet DC-1100G - page 3

    3 Table of Contents Warranty and Service ........................................................................................................... ................................ 2 Table of Contents .............................................................................................................. .................................... ...

  • Jet DC-1100G - page 4

    4 Warnings 1. Read and understand the entire o wners manual before attempting assembly or operation. 2. Read and un derstand the warnings posted on the machi ne and in this manual. Failure to co mply with all of these warnings may cause serious inju ry. 3. Replace the warning labels if they become obscu red or removed. 4. This du st collector is de ...

  • Jet DC-1100G - page 5

    5 blahblahblah 20. Make your workshop child proof with padlocks , master switc hes or by removing starter keys. 21. Give your work undivided attention. Loo king arou nd, carrying on a conversation a nd “horse-play” are careless acts that can result in seriou s injury. 22. Do not use the dust colle ctor for anything except wood dust. Materials s ...

  • Jet DC-1100G - page 6

    6 Introduction This manual is provided by JET covering the safe operation and maintenan ce procedures for model DC-1100 Series Dust Collectors. This manual contains instructions on inst allation, safety precaution s, general operating procedures, maintenance in structions and par ts breakdown. Thi s machine has been designe d and constructed to pro ...

  • Jet DC-1100G - page 7

    7 Unpacking DC-1100A/RC Dust Collector 1. Remove all contents fr om the shipping carton. 2. Report any damage to your distributor. 3. Do not discard any shipping material until after the dust collector has been assembl ed and is running properly. Contents of the Shipping Carto n 1 – Upper Bag Hanger 1 – Base 1 – Housing 1 – Hanger Bracket 1 ...

  • Jet DC-1100G - page 8

    8 Unpacking DC-1100C/RC Dust Collector 1. Remove all contents fr om the shipping carton. 2. Report any damage to your distributor. 3. Do not discard any shipping material until after the dust collector has been assembl ed and is running properly. Contents of the Shipping Carto n Canister Filter Box 1 – Canister Filter 1 – Handle 1 – Bag of Ha ...

  • Jet DC-1100G - page 9

    9 Assembly Base 1. Install four casters to the under side of t he base as pictured in Fig. 2. 2. Thread the hex nut (B, Fig. 1) onto the caster shaft. Then slide the lock washer (A, Fig. 1) over the caster shaft. Thread the caster shaft into the threaded hole on the undersi de of the base, turn until snug. Tighten the nut (B, Fig. 1) against the ba ...

  • Jet DC-1100G - page 10

    10 Connector Housing 5. Attach three support brac kets (A, Fig. 4) to the base using six M8 x 16 hex cap bolts and six M8 flat washers (B, Fig. 4). Hand-tighten only at this time. 6. Install the housing (A, Fig. 5) to two support brackets (B, Fig. 5) using four M8 x 16 hex cap bolts, eight M8 flat washers, and four M8 hex nuts (C, Fig. 5). Be sure ...

  • Jet DC-1100G - page 11

    11 Filter Bag Installation – DC-1100A/RC Referring to Figure 7: 1. Place the hanger (A) on the hanger bracket (B). 2. Slide the filter bag loop (C) over the hanger hook. 3. Thread the re tainer strap (D) through the loops on the filter bag (E) and fasten to the collector housing (F). Collector Bag Installation – DC-1100A/RC Referring to Figure ...

  • Jet DC-1100G - page 12

    12 Collector Bag Installation – DC-1100C/RC 1. Place the rin g over the top of the plastic bag an d fold over the bag approximately three inche s, Figure 9. 2. Insert the snap ring (A, Fig. 10) of the collector bag into the bottom of the housing at an angle. 3. Pull down on the ring to make sure it “seats” in the housing. Note: make sure the ...

  • Jet DC-1100G - page 13

    13 Electrical Connections All electrical connections must be done by a qualified electrician. All adjustments or repairs must be done with the dust collector disco nnected from the power source, unplugged. Failu re to comply may result in serious injury! The DC-1100A/RC and DC-110 0C/RC dust collectors are rated at 115/230V, Prewired 115V . Use a p ...

  • Jet DC-1100G - page 14

    14 Maintenance Never perform maintenance on this machine before turning s witch off and removing plug from power source. Failure to comply may cause serious injury! Cleaning the Filter Bag – DC-1100A/RC Wearing a particle mask or respirator for protection against fine dust particles during cleaning is highly recommended. During first use and afte ...

  • Jet DC-1100G - page 15

    15 Parts List – DC -1100A/RC Dust Collector Index No. Part No. Description Size Qty 1 ............... 411035W ................. Impe ller Hous ing ....................................................................... .............................. 1 2 ............... 411026W ................. Motor Bracket ...................................... ...

  • Jet DC-1100G - page 16

    16 Parts Breakdown – DC -1100A/RC Dust Collector ...

  • Jet DC-1100G - page 17

    17 Filter Assembly for DC-1100C/RC Models Index No. Part No. Description Size Qty 1 ............... 331050..................... Handle .................................................................................................................... 1 2 ............... TS-1540071 ............. Hex Nut ............................................. ...

  • Jet DC-1100G - page 18

    18 Remote Control Breakdown for DC-1100RC Index No. Part No. Description Size Qty ................. DC1100RC-100 ....... Receiver Assembly (Ite ms 1-12) ............................................................. ............... 1 1 ............... DCRC-101 ............... Label .................................................................... ...

  • Jet DC-1100G - page 19

    19 Wiring Diagram – DC-1100A/C ...

  • Jet DC-1100G - page 20

    20 Wiring Diagram – DC-1100RC ...

メーカー Jet カテゴリー Dust Collector

Jet DC-1100Gのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- DC-1100Gの取扱説明書
- Jetの製品カード
- パンフレット
- またはJet DC-1100Gの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Jet DC-1100Gの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Jet DC-1100Gの取り付け説明書、サービスマニュアル、簡易説明書、またはJet DC-1100Gのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Jet DC-1100Gの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Jet DC-1100Gデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJet DC-1100Gを使用するのを助ける技術的文書のことです。説明書は通常、全てのJet DC-1100Gユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Jetの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Jet DC-1100Gの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJet DC-1100Gの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Jet DC-1100Gに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Jet DC-1100Gデバイスの基本機能を使うにあたってのヒント。 Jet DC-1100Gのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Jet DC-1100Gに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJet DC-1100Gのメーカー/サービスへの連絡先に関する情報。

Jet DC-1100Gについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもJet DC-1100Gの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJet DC-1100Gで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)