Mitsubishi WD3300Uの取扱説明書

52ページ 関係なし
ダウンロード

ページに移動 of 52

Summary
  • Mitsubishi WD3300U - page 1

    WD3300 This User Manual is important to you. Please r ead it befor e using your pr ojector . DLP™ PROJECTOR MODEL WD3300U User Manual ...

  • Mitsubishi WD3300U - page 2

    EN-2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE P ARTS INSIDE REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dan ...

  • Mitsubishi WD3300U - page 3

    EN-3 Contents Important safeguards ........................................................................................................................ 4 Preparing your pr ojector .................................................................................................................... 6 Using the remote contr ol ..................... ...

  • Mitsubishi WD3300U - page 4

    EN-4 Important safeguar ds Please read all these instructions r egar ding your projector and r etain them for futur e refer ence. Follow all warnings and instructions marked on the projector . 1. Read instructions All the safety and operating instructions should be read befor e the appliance is operated. 2. Retain instructions The safety and operat ...

  • Mitsubishi WD3300U - page 5

    EN-5 Important safeguards (continued) WARNING: Unplug immediately if there is something wrong with your pr ojector . Do not operate if smoke, strange noise or odor comes out of your projector . It might cause fire or electric shock. In this case, unplug immediately and contact your dealer . Never remove the cabinet. This projector contains high vo ...

  • Mitsubishi WD3300U - page 6

    EN-6 Pr eparing your projector 1 2 3 Checking accessories The following accessories are pr ovided with this projector . Check to be sure that all of the accessories ar e packed in the package. Cables Remote control parts Remote control (290P176-20) RS-232C cable (246C598-10) R6 (size-AA) battery (two) RGB cable for PC (246C597-10) Others • Lens c ...

  • Mitsubishi WD3300U - page 7

    EN-7 Overview 5 6 3 9 4 10 1 2 7 8 5 4 7 10 6 9 11 8 1 2 3 1 Control ar ea 2 Speaker 3 Air outlet grille 4 Lens 5 Remote control sensor (fr ont) 6 Air inlet grille 7 Remote control sensor (r ear) 8 Lamp cover 9 T erminal panel 10 Air outlet grille Caution: Do not replace the lamp immediately after using the projector because the lamp would be extre ...

  • Mitsubishi WD3300U - page 8

    EN-8 1 Preparating your projector (continued) Bottom side 1 Adjustment feet 29 COMPUTER HDM IV IDEO KEYSTON EA UTO POSITION DVI-D(HDCP) S-VIDEO FREEZE AV MUTE PA GE UP HOME PA GE DOWN END 1 2 VOLUME 4 7 8 10 11 12 13 18 19 22 23 24 25 26 27 6 9 14 15 5 17 16 28 CE ASPECT MENU ENTER ZOOM/FOCUS LENS SHIFT LASER 21 20 R-CLICK 1 2 3 Remote control 1 La ...

  • Mitsubishi WD3300U - page 9

    EN-9 Using the r emote control 30° 30° 30° 30° 20° 10° 20° 10° 20° 20° Operational range of the r emote contr ol • Keeptheremotecontr olphoto-sensoroutofdirect sunlight or fluorescent lamp light. • Keeptheremotecontr olphoto-sensoratleast2m (6 feet) away from fluor escent lamp ...

  • Mitsubishi WD3300U - page 10

    EN-10 Setting up your pr ojector Setting up the scr een Install the screen perpendicularly to the pr ojector . If the screen can not be installed in such a way , adjust the projection angle of the pr ojector . (See page 11.) • Installthescreenandpr ojectorsothattheprojector’ slensisplacedatthesame ...

  • Mitsubishi WD3300U - page 11

    EN-11 Setting up your pr ojector (continued) Adjusting the position of the pr ojected image T o adjust the positions of the projector and the screen, use LENS SHIFT button. 1. Pr ess the LENS SHIFT button. • The LENS SHIFT menu appears at the center of the screen. 2. Press the  ,  ,  or  button to move the image position. • Wh ...

  • Mitsubishi WD3300U - page 12

    EN-12 Setting up your pr ojector (continued) Fr ont pr ojection, ceiling mounting For ceiling mounting, you need the ceiling mount kit designed for this projector . Ask a specialist for installation. For details, consult your dealer . • Thewarrantyonthisprojectordoesnotcoverany damage caused by use of any non-recomme ...

  • Mitsubishi WD3300U - page 13

    EN-13 2 1 Viewing computer images 2 1 AUDIO OUT AUDIO IN-1/2 2 1 A. Connecting the pr ojector to a computer Preparation: • Makesurethatthepowerofthepr ojectorandthatofthecomputerareturnedoff. • Whe ncon necti ngth ep roj ector to ade sktop comp ute r ,dis conne ctt ...

  • Mitsubishi WD3300U - page 14

    EN-14 Viewing computer images (continued) 1. Plug the attached power cor d into the power cord inlet of this projector . 2. Plug the other end of the power cor d into a power outlet. • ThepowercordsforuseintheU.S.andEur opeareincludedwiththisprojector .Usetheappropriateoneforyour c ...

  • Mitsubishi WD3300U - page 15

    EN-15 C. Installing the terminal cover This projector includes a terminal cover . If necessary , install the terminal cover to the projector . 1. Fit two hooks of the terminal cover into the pr ojector . 2. Tighten the attachment scr ews (a) firmly . Important: • Don’t carry the pr ojector by the terminal cover . (a) Viewing computer images ...

  • Mitsubishi WD3300U - page 16

    EN-16 Viewing computer images (continued) D. Pr ojecting images Preparation: • Removethelenscap. POWER button COMPUTER/ DVI-D button COMPUTER 1, 2 buttons LENS SHIFT button POWER button ZOOM/FOCUS button LENS SHIFT button Main power switch ZOOM/FOCUS button DVI-D(HD CP) button POWER indicator ST A TUS indicator ENTER button  ,  ...

  • Mitsubishi WD3300U - page 17

    EN-17 Viewing computer images (continued) 9. Pr ess the ZOOM/FOCUS button to display the ZOOM/FOCUS menu. 10. Adjust with the  or  button to get an approximate size. • WhentheENTERbuttonispressedwhiletheZOOM/FOCUSmenuisdisplayed,theadjustmentmodeis switched between F AST and STEP . When F A ...

  • Mitsubishi WD3300U - page 18

    EN-18 A V mute The video and audio signals are temporarily muted when the A V MUTE button is pressed. T o cancel muting, press the A V MUTE button again. • Ittakesseveralsecondsbeforemutingiscompletelycanceled. • IfA VMUTEMODEintheINST ALLA TIONmenuissettoIMAGE,thesplash ...

  • Mitsubishi WD3300U - page 19

    EN-19 Viewing computer images (continued) Setting the aspect ratio Y ou can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the scr een to be used or your preference. How to change the settings: With the remote contr ol: 1. Pr ess the ASPECT button. • ...

  • Mitsubishi WD3300U - page 20

    EN-20 Viewing video images Connecting to a video player , etc. 1. Connect one end of a commercially available video cable to the VIDEO IN terminal of the projector . 2. Connect the other end of the video cable to the video output terminal of the video equipment. 3. Connect one end of a commercially available audio cable to the audio input terminals ...

  • Mitsubishi WD3300U - page 21

    EN-21 Viewing video images (continued) Projector + DVD player or HDTV decoder Some DVD players have an output connector for 3-line fitting (Y , C B , C R ). When connecting such DVD player with this projector , use the COMPUTER/COMPONENT VIDEO IN-2 terminals. C B (P B ) Y C R (P R ) B G R AUDIO IN-2 BNC cable (option) DVD player or HDTV decoder BN ...

  • Mitsubishi WD3300U - page 22

    EN-22 Connection (for video equipment having a DVI-D terminal) Equipment having a DVI-D terminal Audio cable (option) T o DVI-D terminal DVI cable (option) COMPUTER/COMPONENT VIDEO DVI-D IN (HDCP) T o audio output terminals AUDIO DVI-D • ForconnectiontotheDVI-Dterminal,useacommerciallyavailableDVIcable. •? ...

  • Mitsubishi WD3300U - page 23

    EN-23 Viewing video images (continued) D. Pr ojecting images Preparation: • Removethelenscap. POWER button COMPUTER/ DVI-D button COMPUTER 1, 2 buttons LENS SHIFT button POWER button ZOOM/FOCUS button LENS SHIFT button Main power switch ZOOM/FOCUS button POWER indicator ST A TUS indicator ENTER button  ,  ,  ,  buttons ENT ...

  • Mitsubishi WD3300U - page 24

    EN-24 11. Press the LENS SHIFT button. The LENS SHIFT menu appears at the center of the scr een. 12. Press the  or  button to adjust the vertical position and  or  button to adjust the horizontal position of the displayed image. • Whentheimageisnotdisplayedwithinthescreen,adjustthepr ojectionangl ...

  • Mitsubishi WD3300U - page 25

    EN-25 Menu operation Y ou can make various settings using the displayed menus. Menu display mode and menu type There ar e two menu display modes: QUICK MENU mode and DET AIL MENU mode. Each mode has the following menus. Menus displayed in the QUICK MENU mode The QUICK MENU contains frequently used setting items and the INFOMA TION menu shows the pr ...

  • Mitsubishi WD3300U - page 26

    EN-26 Basic pr ocedure for setting the menus 1. Pr ess the MENU button. • Themenuselectionbarisdisplayedinthe QUICK MENU mode. QUICK MENU Selectable menus are displayed by icons. (The menu icon being selected is displayed on a blue background.) The name of the menu being selected is displayed. 2. Pr ess the  or  b ...

  • Mitsubishi WD3300U - page 27

    EN-27 Settings of each menu item Menus displayed in the QUICK MENU mode QUICK MENU NORMAL (FULL) ASPECT LAMP MODE ST ANDARD QUICK MENU CONTRAST BRIGHTNESS 0 0 ST ANDARD COLOR 0 COLOR COLOR TEMP . 0 SHARPNESS AUTO COLOR ENHANCER SELECT USER MENU OK DET AIL MENU * * ITEM SETTING FUNCTION COLOR ENHANCER AUTO Select to optimize the settings automatical ...

  • Mitsubishi WD3300U - page 28

    EN-28 Menus displayed in the QUICK MENU mode and the DET AIL MENU mode INFORMA TION menu INFORMA TION LAMP TIME (LOW) INPUT RESOLUTION VERTICAL FREQUENCY HORIZONT AL FREQUENCY SYNC. TYPE 5WIRE 60.02 KHz 75.04 Hz 1024 x 768 COMPUTER2 0 H RG HV B ITEM DESCRIPTION LAMP TIME (LOW) This item shows a lamp operating time (hour) calculated based on that LA ...

  • Mitsubishi WD3300U - page 29

    EN-29 Menus displayed in the DET AIL MENU mode IMAGE menu IMAGE opt. CONTRAST BRIGHTNESS 0 0 ST ANDARD 0 0 COLOR TINT COLOR TEMP . 0 SHARPNESS AUTO COLOR ENHANCER OK ADVANCED MENU IMAGE ADV ANCED MENU opt. ON ON NOISE REDUCTION CTI INPUT LEVEL 0 ITEM SETTING FUNCTION COLOR ENHANCER AUTO Select to optimize the settings automatically depending on the ...

  • Mitsubishi WD3300U - page 30

    EN-30 INSTALLATION menu INST ALLA TION opt. LAMP MODE OFF AUTO POWER ON ST ANDARD ST ANDBY MODE ST ANDARD ON SPLASH SCREEN ON AUTO POWER OFF OFF BACK COLOR BLUE OFF IMAGE REVERSE BLACK AV MUTE MODE IMAGE CAPTURE GO LENS LOCK OK INST ALLA TION LENS LOCK opt. OFF OFF OK ZOOM/FOCUS LOCK LENS SHIFT LOCK LENS SHIFT RESET ITEM SETTING FUNCTION LAMP MODE ...

  • Mitsubishi WD3300U - page 31

    EN-31 FEA TURE menu FEA TURE NORMAL (FULL) opt. MENU POSITION VIDEO SIGNAL ? ASPECT RESET ALL English LANGUAGE A Ë OK SCART INPUT DISPLA Y INPUT P ASSWORD FUNCTION CINEMA MODE 1. SETUP AUTO OFF AUTO AUTO ITEM SETTING FUNCTION ASPECT NORMAL (FULL) Input video signal is displayed at the max height (800 pixels) or max width (1280 pixels) of the panel ...

  • Mitsubishi WD3300U - page 32

    EN-32 SIGNAL menu USER 1 CLAMP WIDTH CLAMP POSITION 1 LPF OFF SHUTTER(U) 0 SHUTTER(L) 0 VE RT . SYNC AUTO ? SHUTTER(LS) 0 SHUTTER(RS) 0 SIGNAL opt. SIGNAL VERTICAL FREQUENCY HORIZONT AL FREQUENCY 75.04 Hz HORIZ. PIXELS 1024 60.02 KHz CANCEL opt. OK OK EXECUTE 768 VER T. LINES RESOLUTION (MEMORIZE) R G B R G B SIGNAL HORIZ. POSITION 0 VE RT . POSITI ...

  • Mitsubishi WD3300U - page 33

    EN-33 Adjusting pr ojected images T o adjust the brightness (CONTRAST and BRIGHTNESS): Y ou can make adjustments for the brightness of the projected image using the menu. (See page 26 for menu setting.) 1. Display the QUICK MENU or IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pr essing the  or  button. 3. Adjust the selected item by pr ess ...

  • Mitsubishi WD3300U - page 34

    EN-34 T o cancel the menu: 7. Pr ess the MENU button. T o enable the stored color temperature: 1. Set COLOR TEMP . to USER in the QUICK MENU or set it to USER in the IMAGE menu. About color temperature There ar e different kinds of white color . Color temperature is a way to show the differ ences in white. White of which temperature is low appears ...

  • Mitsubishi WD3300U - page 35

    EN-35 Adjusting pr ojected images (continued) How to adjust the computer image This projector automatically selects a pr oper signal format according to the type of video signal supplied from the computer . However , video signals from the computer may not be projected corr ectly depending on the types of the computer and images to be projected. In ...

  • Mitsubishi WD3300U - page 36

    EN-36 How to adjust the image supplied from the computer using the menu: Carry out the following procedur es according to the symptoms. Wide strips appear . ��������������� Adjust TRACKING in the SIGNAL menu. The projected image flickers. The projected image is blurr ed. ...................................... Adjust F ...

  • Mitsubishi WD3300U - page 37

    EN-37 Setting of the image displayed during startup or muting Y ou can display your desired image as the startup screen (or splash scr een). Using the menu, you can also use such image as a background that is displayed while the video is muted or no signal is supplied. • Y oucan capture the images from the COMPUTER1, COMPUTER2, DVI, and ...

  • Mitsubishi WD3300U - page 38

    EN-38 Passwor d function This projector is equipped with the passwor d function that is designed for prevention of wr ong operation by children and r estriction on operation by other than specified users. The password function has 3 modes as follows. DISPLA Y INPUT .......... When the pr ojector is tur ned on, the startup scr een (or splash screen ...

  • Mitsubishi WD3300U - page 39

    EN-39 Mouse r emote contr ol By connecting to personal computer through the USB port, you can operate your computer with the pr ojector remote control. Projector + computer with USB connector USB cable (option) USB 4-pin (type B) USB 4-pin (type A) T o USB port USB • Y oucan use the mouse remote contr ol function with a computer supporti ...

  • Mitsubishi WD3300U - page 40

    EN-40 Supervising and contr olling by computer Y ou can supervise and control the projector’ s operation using a personal computer via a LAN network. • T osuperviseandcontroltheprojector ,installthesoftware“Projector -ControlDeviceInstaller*”containedinthe attached CD-ROM. For the installat ...

  • Mitsubishi WD3300U - page 41

    EN-41 Indicators This projector has 2 indicators, each of which shows the operation condition of the pr ojector . The following offer solutions to possible pr oblems. If these problems persist, turn the projector off and consult your dealer . POWER indicator ST A TUS indicator Normal condition POWER ST A TUS CONDITION NOTE Steady red Off Stand-by B ...

  • Mitsubishi WD3300U - page 42

    EN-42 Replacing the lamp This projector is equipped with a lamp to pr oject images. This lamp is a consumable. It may bur n out or its brightness may decrease during use. In such cases, r eplace the lamp with a new one as soon as possible. Be sure to r eplace the lamp with a new lamp separately sold that is exclusive to this projector . Contact you ...

  • Mitsubishi WD3300U - page 43

    EN-43 Replacing the lamp (continued) T o replace the lamp: 1. T urn off the main power switch and unplug the power cord. 2. Loosen the screw (a) using a Phillips scr ewdriver (+),andremovethelampcover(b). (a) (b) 3. Loosen the scr ews (c) using a Phillips screwdriver (+). (c) 4. Pull the handle. 5. Pull out the lamp box by the han ...

  • Mitsubishi WD3300U - page 44

    EN-44 When removing the lamp fr om the ceiling-mounted projector When removing the lamp fr om the ceiling-mounted projector , use the lamp replacement tray packed with the projector or option lamp to pr event glass fragments from scattering. • Assemblethelampreplacementtrayaccor dingtotheprocedureshownonit. 1. ...

  • Mitsubishi WD3300U - page 45

    EN-45 T roubleshooting Before asking for r epair of the projector , check the following. If the symptom persists, stop using the projector , be sure to unplug the power plug, and then contact your dealer . No image appears on the screen. Problem Solution Power can not be turned on. • Checkwhethertheindicatorsareonorof f ...

  • Mitsubishi WD3300U - page 46

    EN-46 T roubleshooting (continued) No image appears on the screen. (continued) Problem Solution “NO SIGNAL” is displayed. • T ur nonthepoweroftheconnecteddevice,orcheckwhetherther eissomething wrong with the connected device. • Checkwhethertheexternaldeviceoutputsignals.(C ...

  • Mitsubishi WD3300U - page 47

    EN-47 T roubleshooting (continued) Images are not displayed corr ectly . (continued) Problem Solution Differ ent color tint. • Whencomparingimagesprojectedbytwopr ojectors,tintsinthedisplayedimages may be differ ent because of variation between their optical components. This is not a malfunction. • When ...

  • Mitsubishi WD3300U - page 48

    EN-48 T roubleshooting (continued) If the following problem occurs after the lamp is r eplaced, check the following first. Problem Solution The pr oject or does not turn on. • Fitthelampcoversecurely .(Seepages42and43.) • Resetthelampoperatingtime.(Seepage43.) The ST A TUS indicator b ...

  • Mitsubishi WD3300U - page 49

    EN-49 Specifications The specifications and outside appearance of the projector ar e subject to change without prior notice. T ype DLP™ projector Model WD3300U Display technology 0.65-inch Single chip DMD Pixel 1280 x 800 = 1024000 pixels Projection lens F 2.0 - 2.4 f= 24.5 - 33.1 mm Light-source lamp 330 W Image size (projection distance) 40? ...

  • Mitsubishi WD3300U - page 50

    EN-50 Specifications (continued) Specification of RGB signals in each computer mode of the projector Signal mode Resolution (H x V) Horizontal frequency (kHz) V ertical frequency (Hz) Normal mode (H x V) Real mode (H x V) TV60, 480i (525i) - 15.73 59.94 1066 x 800 - *1 TV50, 576i (625i) - 15.63 50.00 1066 x 800 - *1 1080i60 (1125i60) - 33.75 60.0 ...

  • Mitsubishi WD3300U - page 51

    EN-51 450 187 101* 373 Dimension drawings (unit: mm) Specifications (continued) Specification of RGB signals in each computer mode of the projector (continued) Important: • Some computers aren’ t compatible with the projector . • The projector’ s maximum resolution is 1280 x 800 pixels. It may not display images of higher resolution ...

  • Mitsubishi WD3300U - page 52

    1 Zusho Baba, Nagaokakyo-City , Kyoto Japan M I T S U B I S H I E L E C T R I C C O R P O R A T I O N A ...

メーカー Mitsubishi カテゴリー Video projector

Mitsubishi WD3300Uのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- WD3300Uの取扱説明書
- Mitsubishiの製品カード
- パンフレット
- またはMitsubishi WD3300Uの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Mitsubishi WD3300Uの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Mitsubishi WD3300Uの取り付け説明書、サービスマニュアル、簡易説明書、またはMitsubishi WD3300Uのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Mitsubishi WD3300Uの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Mitsubishi WD3300Uデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMitsubishi WD3300Uを使用するのを助ける技術的文書のことです。説明書は通常、全てのMitsubishi WD3300Uユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Mitsubishiの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Mitsubishi WD3300Uの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMitsubishi WD3300Uの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Mitsubishi WD3300Uに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Mitsubishi WD3300Uデバイスの基本機能を使うにあたってのヒント。 Mitsubishi WD3300Uのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Mitsubishi WD3300Uに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMitsubishi WD3300Uのメーカー/サービスへの連絡先に関する情報。

Mitsubishi WD3300Uについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもMitsubishi WD3300Uの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMitsubishi WD3300Uで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)