日本語 dropdown-ico

Hunter Fan 44459の取扱説明書

40ページ 0.28 mb
ダウンロード

ページに移動 of 40

Summary
  • Hunter Fan 44459 - page 1

    Owner’ s Manual Model 44459 File: AJ570/41383 book p. 1-19/art Created: 9-28-98 db Folder: AJ570/Hunter/41383 Alt: 2-2-99 db Prints black SINCE 1 8 8 6 ® AUTO SA VER 459 P AGE 1 5: 7 2 2 2 3 B99A p1-19 2/7/03 9:58 AM Page 1 ...

  • Hunter Fan 44459 - page 2

    Ask Y our Local Retailer for Other Quality Pr oducts fr om Hunter T o locate your nearest Hunter Dealer , call 1-800-4HUNTER, or visit The Hunter Fan Co. website: www .HunterFan.com. Fans Air Purifiers Humidifiers ...

  • Hunter Fan 44459 - page 3

    Introduction Model Information: Model Number ____________________________________ Serial Number _____________________________________ Date Purchased____________________________________ Where Pur chased ___________________________________________________________ CONGRA TULA TIONS! Y our new Hunter electronic thermostat will provide years of reliable ...

  • Hunter Fan 44459 - page 4

    T able of Contents Read This Before Installing Thermostat 6 Features 8 What Y ou Need 10 Remove Old Thermostat 10 Wire Labeling 11 Mount W allplate and Thermostat 12 Selector Switches 14 Setting Time and Day 16 Auto Programming 17 Personal Program Schedule 18 Manual Programming 19 W eekday Programming 19 Saturday and Sunday Pr ogramming 21 Reviewin ...

  • Hunter Fan 44459 - page 5

    OPERA TIONS ( continued) SAFETY FEA TURES TROUBLESHOOTING WIRING DIAGRAMS T emporary Manual Override 24 Permanent Manual (V acation) Override 25 Auto Season Changeover 26 Home T oday 26 Energy Monitor 28 Filter Monitor 29 Auto Recovery 30 Keyboard Lock 31 Backlighting 31 Low Battery W arning 32 Error Mode 33 Auto Cut-Off 33 Problems & Solutions ...

  • Hunter Fan 44459 - page 6

    IMPORT ANT 1 Read the entire installation section of this Owner’ s Manual thoroughly before you begin to install or operate your Hunter Thermostat. REMOVE THE MYLAR LABEL FROM THE LCD DISPLA Y WINDOW . INST ALLA TION 2 All installation is normally performed at your thermostat. ARMCHAIR PROGRAMMING 3 Y ou can program your thermostat before install ...

  • Hunter Fan 44459 - page 7

    P AGE 7 Read This Before Installing Thermostat (continued) POWER F AILURE 7 W henever the main power is interrupted or fails, the battery power retains the programs and curr ent time. AUTO RECOVER Y 8 Y our thermostat is set from the factory to gradually recover the room temperatur e from an energy saving pr ogram to your comfort program. Ther efor ...

  • Hunter Fan 44459 - page 8

    P AGE 8 Features HOME TODA Y : Overrides energy- saving program temperatur es while you are at home for the day . ENERGY : Measures and displays heating and cooling system operating time for T oday , Y esterday , This W eek, Last Week, or T otal. By monitoring your energy usage, you can program the thermostat to optimize energy savings. T emperatur ...

  • Hunter Fan 44459 - page 9

    P AGE 9 Provides permanent temperature setting by overriding stored programs. It also r eturns the thermostat to current program control fr om manual override or Home T oday mode. For entering minute of day . Enters Program Mode for reviewing and changing weekday or weekend programs. Selects the day or days to review or change in Program Mode. Retu ...

  • Hunter Fan 44459 - page 10

    P AGE 10 10-11 INST ALLA TION This thermostat includes two #8 slotted screws and two wall anchors for mounting. T o install your thermostat, you should have the following tools and materials. ■ Slotted Screwdriver(s) ■ Phillips Screwdriver ■ Hammer ■ Electric drill and 3/16" bit ■ T wo 1.5 V (AA) size alkaline batteries What Y ou Nee ...

  • Hunter Fan 44459 - page 11

    P AGE 11 ■ Each wire coming from the wall to the existing thermostat is connected to a terminal point on that thermostat. Each of these terminal points is usually marked with a code letter as shown in T able A on this page. ■ The number of wires in your system can be as few as two (for heat only systems), as many as eight, or any number in betw ...

  • Hunter Fan 44459 - page 12

    P AGE 12 ■ Remove the wallplate from your thermostat by pr essing the release tab on the bottom of the thermostat. (See Figur e 2.) ■ Position wallplate on wall and pull existing wires thr ough large opening. Then level for appearance. Mark holes for plastic anchors provided if your existing holes do not line up with those on the Hunter wallpla ...

  • Hunter Fan 44459 - page 13

    P AGE 13 ■ Match and connect the labeled wires to the appropriate coded terminal screws on the mounting plate. (See Figure 4, 5.) Ignore any wir es which may be present, but which were not connected to the old thermostat. ■ Be sure to tighten the terminal screws securely , otherwise a loose wire could cause operational problems with your system ...

  • Hunter Fan 44459 - page 14

    In order for this Hunter thermostat to contr ol your system, the system type must be specified by selector switches on the printed circuit boar d inside the thermostat. There are also other selector switches that allow you to customize the features to suit your needs. NOTE: When changing these features after installation, move the HEA T / COOL sele ...

  • Hunter Fan 44459 - page 15

    P AGE 15 Switch Setting Switch Function Alternate Standard SW 5 F° / C° Celsius Fahrenheit SW 6 12 Hr . / 24 Hr . 24 Hour 12 Hour SW 7 Span +2°F / –1°F +1°F / –1°F SW 8 Auto Recovery Disable Enable T able B Feature Selector Switches: ■ F° / C° selector (Fahr enheit / Centigrade) – Switch 5 Y our thermostat is set for F° mode from t ...

  • Hunter Fan 44459 - page 16

    P AGE 16 16-17 PROGRAMMING Remove the mylar label covering the LCD display window before operating thermostat. Setting Time and Day HOUR MIN DA Y RETURN EXAMPLE: Set the thermostat to the current time of 9:43 a.m. on Saturday . Refer to Figure at right. ■ During time and day setting mode, the temperature and program displays will go blank. ■ Pr ...

  • Hunter Fan 44459 - page 17

    P AGE 17 Studies conducted by the Department of Ener gy estimate that setting your thermostat back 10°F (6°C) for two 8-hour periods during winter can reduce your fuel bill by as much as 33%. By setting your thermostat up 5°F (3°C) for two 8-hour periods during summer you can r educe your fuel bill up to 25%. Y our thermostat is capable of hold ...

  • Hunter Fan 44459 - page 18

    P AGE 18 18-19 PROGRAMMING Personal Program Schedule Day Program 1 Program 2 Program 3 Program 4 Mon. Time Time Time Time - Fri. T emp T emp T emp T emp Sat. Time Time Time Time T emp T emp T emp T emp Sun. Time Time Time Time T emp T emp T emp T emp Heating Program 1 Program 2 Program 3 Program 4 Time Time Time Time T emp T emp T emp T emp Time Ti ...

  • Hunter Fan 44459 - page 19

    ■ Y our thermostat can be programmed for weekdays and for Saturday and Sunday . Use the Programming steps below to enter or revise pr ograms to match your Personal Program Schedule. The same steps are used when entering pr ograms for the first time, or revising pr ograms entered during Auto Programming. ■ When batteries are first installed, the ...

  • Hunter Fan 44459 - page 20

    20-21 PROGRAMMING W eekday Programming (cont.) Step 3 Step 5 ■ If you desire only weekday programs, pr ess to return to normal mode. ■ After 15 seconds, the thermostat will return to normal mode automatically . RETURN Step 6 ■ Change the System Selector Switch to the other system, and repeat Steps 2 thr ough 5 above. File: AJ570/41383 book p. ...

  • Hunter Fan 44459 - page 21

    Step 2 ■ Press to enter program mode, display shows weekday pr ograms. ■ Press to reach the Satur day programs. PROG Step 3 PROG DA Y Step 5 ■ Press to change to the Sunday programs. ■ Repeat Steps 3 and 4 to complete the Sunday programs. Step 6 ■ When finished press to return to normal mode. ■ After 15 seconds, the thermostat will retu ...

  • Hunter Fan 44459 - page 22

    Y ou may want to review the programs to confirm that the settings ar e compatible with your lifestyle. 22-23 PROGRAMMING Reviewing Programs W eekday Programs ■ Press to display M – F programs. ■ Press repeatedly to cycle through the 4 pr ograms. PROG W eekend Programs ■ Press repeatedly to cycle through the 4 pr ograms. PROG ■ Press to di ...

  • Hunter Fan 44459 - page 23

    ■ Current time and temperature. ■ Thermostat is set to AUTO, and the heating system is on. ■ Press for 1 second or less. ■ Set T emperature is shown above current room temperatur e. ■ If held for over 1 second, T emporary Manual Override mode is entered. Refer to the next page. NOTE: Programs take af fect as soon as the thermostat returns ...

  • Hunter Fan 44459 - page 24

    The System Selector switch on the fr ont of the thermostat determines the operating mode of the thermostat. Y ou may select COOL, OFF , HEA T , AUTO. In order to take full advantage of this thermostat’ s features, we recommend using the AUTO mode. Refer to the Auto Season Changeover information on page 26. NOTE: Anytime you install or remove the ...

  • Hunter Fan 44459 - page 25

    T o end the T emporary Manual Override: NOTE: The Auto Season Changeover feature will not operate while the thermostat is in T emporary Manual Override. Refer to the Auto Season Changeover feature on page 26 for mor e information. NOTE: If the thermostat has not been programmed, then a T emporary Override becomes a Permanent Override. See the next ...

  • Hunter Fan 44459 - page 26

    When the System Selector is in AUTO position, the thermostat will automatically change between Heating and Cooling systems, depending on your program. W e recommend keeping your programmed heating and cooling temperatur es at least 4°F (2°C) apart to allow the Auto Season Changeover to occur when the appropriate temperatur e span has been reached ...

  • Hunter Fan 44459 - page 27

    ■ Press to exit Home T oday mode before the schedule ending time. “HOME” is no longer displayed on the LCD screen, and the thermostat returns to the current pr ogram. HOLD CLEAR HOME TODA Y HOME TODA Y ■ If Home T oday is already active, you may similarly extend it to the first program of the next day by pr essing the key again after the st ...

  • Hunter Fan 44459 - page 28

    72 . 7I . 70 . 28-29 OPERA TION Energy Monitor ENERGY ENERGY ■ Press and hold for 3 seconds to reset the Ener gy Monitor’ s counters. The display will blink, and all counters will be cleared to zer o. NOTE: Clearing the Energy Monitor counter will also clear the Filter Monitor counter , as Filter usage and T otal Energy usage are the same. Also ...

  • Hunter Fan 44459 - page 29

    Y our thermostat also keeps a record of the number of hours your filter has been in use. T o maximize your system’s performance a nd energy efficiency , change or clean your filter regularly . NOTE: Clearing the Filter Monitor counter will also clear ALL Energy Monitor counters, as Filter usage and T otal Energy usage are the same. Also, clearing ...

  • Hunter Fan 44459 - page 30

    72 . 7I . 70 . 30-31 OPERA TION Auto Recovery Hunter’ s Auto Recovery feature meets the E NERGY S TA R ® guidelines for energy ef ficiency by allowing the heating or cooling system to recover gradually from an ener gy-saving setpoint temperature to a comfort setpoint temperature. Auto Recovery calculates how early to turn your system back On, so ...

  • Hunter Fan 44459 - page 31

    Backlighting (INDIGLO ® night-light) ■ Press the Light Bar on the left side of the thermostat to illuminate the display . ■ The display will remain illuminated for 5 seconds after the last key is pressed. This allows the light to stay on if you need to operate several keys. Note: If the thermostat is in Low Battery warning condition, the backl ...

  • Hunter Fan 44459 - page 32

    When the batteries become too weak for normal operation, the thermostat enters the second stage low battery warning which shuts down the thermostat. In this condition, “BA TT” flashes alone on the display , and the thermostat will turn your system Off. Y our system will remain shut-of f until the batteries are replaced. NOTE: The thermostat wil ...

  • Hunter Fan 44459 - page 33

    If the thermostat is unable to control your system due to an unexpected battery problem, the thermostat will enter Err or Mode. In this condition, the thermostat flashes “ERR-” on the LCD display , and shuts off your system. T o correct this problem, r eplace the batteries with 2 new AA alkaline batteries, even if you have recently r eplaced th ...

  • Hunter Fan 44459 - page 34

    34-35 TROUBLESHOOTING Problem Solution SCRAMBLED OR DOUBLE DISPLA Y (numbers over numbers) NO DISPLA Y ENTIRE DISPLA Y DIMS PROGRAM DOES NOT CHANGE A T YOUR DESIRED SETTING AUTO / F AN DOES NOT TURN ON HEA TING OR COOLING DOES NOT GO ON OR OFF 1. Remove clear mylar sticker 1. Check battery connections and batteries. 2. Press RESET button with a sma ...

  • Hunter Fan 44459 - page 35

    Solution (cont.) ERRA TIC DISPLA Y IF UNIT CONTINUES TO OPERA TE IN THE OFF POSITION THERMOST A T PERMANENTL Y READS “HI,” “LO,” OR “ERR-” AFTER PRESSING RESET BUTTON 1. Press the RESET button once with a small pin and hold for two seconds. The thermostat will need to be re-pr ogrammed. 1. Replace unit. 1. Replace unit. If you experienc ...

  • Hunter Fan 44459 - page 36

    36-37 WIRING DIAGRAMS 5-wire Heat/Cool System X - No Connection THERMOST A T G W Y RH RC Heat Relay or V alve Heat 24V Supply Fan Relay Cool Contactor Cool 24V Supply THERMOST A T G W Y RH RC Heat /Cool 24V Supply Fan Relay Heat Relay or V alve Cool Contactor Jumper 4-wire Heat/Cool System X O/B X O/B B99A p30-40 2/7/03 9:59 AM Page 7 ...

  • Hunter Fan 44459 - page 37

    Single-stage Heat Pump THERMOST A T G W Y O/B RH RC Heat Pump 24V Supply Fan Relay Compressor Contactor Reversing Va l ve Jumper X - No Connection O/B 2-wire Heat Only THERMOST A T G W Y RH RC Heat Relay or V alve Heat 24V Supply X X X X X B99A p30-40 2/7/03 9:59 AM Page 8 ...

  • Hunter Fan 44459 - page 38

    3-wire Cool Only 3-wire Heat Only THERMOST A T W RH RC Heat Relay or V alve Heat 24V Supply Fan Relay THERMOST A T G W Y RH RC Cool Contactor Fan Relay Cool 24V Supply G Y O/B O/B 38-39 WIRING DIAGRAMS X - No Connection X X X X X X Jumper B99A p30-40 2/7/03 9:59 AM Page 9 ...

  • Hunter Fan 44459 - page 39

    B99A p30-40 2/7/03 9:59 AM Page 10 ...

  • Hunter Fan 44459 - page 40

    © 2003 Hunter Fan Company 41610-01 2/03 Hunter Fan Company 2500 FRISCO AVENUE MEMPHIS, TN 38114 ® B99A p30-40 2/7/03 9:59 AM Page 11 ...

メーカー Hunter Fan カテゴリー Thermostat

Hunter Fan 44459のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 44459の取扱説明書
- Hunter Fanの製品カード
- パンフレット
- またはHunter Fan 44459の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Hunter Fan 44459の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Hunter Fan 44459の取り付け説明書、サービスマニュアル、簡易説明書、またはHunter Fan 44459のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Hunter Fan 44459の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Hunter Fan 44459デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがHunter Fan 44459を使用するのを助ける技術的文書のことです。説明書は通常、全てのHunter Fan 44459ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Hunter Fanの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Hunter Fan 44459の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははHunter Fan 44459の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Hunter Fan 44459に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Hunter Fan 44459デバイスの基本機能を使うにあたってのヒント。 Hunter Fan 44459のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Hunter Fan 44459に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるHunter Fan 44459のメーカー/サービスへの連絡先に関する情報。

Hunter Fan 44459についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもHunter Fan 44459の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHunter Fan 44459で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)