Mitsubishi LCD4000の取扱説明書

37ページ 3.58 mb
ダウンロード

ページに移動 of 37

Summary
  • Mitsubishi LCD4000 - page 1

    LCD4000 40" LCD Colour Monitor User’ s Man ual ...

  • Mitsubishi LCD4000 - page 2

    Index Declaration of conf ormity ...................................................................................................... .......................... English-1 Impor tant Inf or mation .......................................................................................................... ............................ English-2 W arni ...

  • Mitsubishi LCD4000 - page 3

    English -1 English DECLARA TION OF CONFORMITY This device complies with P ar t 15 of FCC Rules. Operation is subject to the f ollowing two conditions. (1) This device ma y not cause har mful interference , and (2) this device must accept an y interference received, including interf erence that may cause undesired operation. U .S. Responsible P ar t ...

  • Mitsubishi LCD4000 - page 4

    English-2 Dec laration Declaration of the Man ufacturer We hereb y cer tify that the colour monitor LCD4000 is in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC: – EN 55022 – EN 61000-3-2 – EN 61000-3-3 – EN 55024 and marked with NEC-Mitsubishi Electric Visual Systems Cor poration 4-13-23, Shibaura, M ...

  • Mitsubishi LCD4000 - page 5

    English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NO TE THE FOLLO WING WHEN SETTING UP AND USING THE LCD4000 LCD COLOUR MONIT OR: • DO NO T OPEN THE MONITOR . There are no user ser viceable parts inside and opening or removing cov ers may e xpose you to dangerous shoc k hazards or other risks. Refer all servicing to qualified service personnel. ? ...

  • Mitsubishi LCD4000 - page 6

    English-4 REMOTE CONTROLLER RU-M104 Contents P ower Cord User ’ s Man ual PC - Video Signal Cable (D-SUB to D-SUB Cable) Wireless Remote Control and AA Batteries Clamper x 2 Y our new LCD4000 LCD monitor box* should contain the f ollowing: • LCD4000 LCD monitor • P ower Cord (3 m) • PC - Video Signal Cable SC-B113 (4 m) • User ’ s Manua ...

  • Mitsubishi LCD4000 - page 7

    English-5 English 7 DO WN ( ) button Activates the OSM men u when the OSM menu is turned-off. Acts as button to mo ve the highlighted area down to select the adjustment with OSM menu. 8 EXIT button Activates the OSM men u when the OSM menu is turned-off. Acts as EXIT button to mo ve to pre vious menu with OSM menu. 9 Remote control sensor and P owe ...

  • Mitsubishi LCD4000 - page 8

    English-6 T erminal Panel 6 A UDIO IN 1, 2, 3 T o input audio signal from e xternal equipment such as a computer , VCR or D VD player . 7 A UDIO OUT T o output the audio signal from the A UDIO IN 3 jack. 8 VIDEO VIDEO IN connector (BNC and RCA): T o input a composite video signal. BNC and RCA connectors are not av ailable at the same time. (Use onl ...

  • Mitsubishi LCD4000 - page 9

    English-7 English 1 PO WER button Switches the pow er on/off. * If P ower Indicator is not glo wing, then none of the controls will work. 2 INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [D VD/HD], [VIDEO]. 3 A UDIO INPUT button Selects from input audio signal, [A UDIO1], [A UDIO2], [A UDIO3]. 4 SIZE button Selects picture size , [ ...

  • Mitsubishi LCD4000 - page 10

    English-8 P oint the top of the remote control toward the LCD monitor ’ s remote sensor during button operation. Use the remote control within a distance of about 7 m from the front of the LCD monitor ’ s remote control sensor and at a horizontal and ver tical angle of within 30 ° within a distance of about 3 m. Operating Range for the Remote ...

  • Mitsubishi LCD4000 - page 11

    English-9 English 1. Determine the installation location CA UTION: DO NOT A TTEMPT TO INST ALL THE LCD MONIT OR BY Y OURSELF Installing your LCD displa y must be done by a qualified technician. Contact your dealer f or more information. CA UTION: MO VING OR INST ALLING THE LCD MONIT OR MUST BE DONE BY TW O OR MORE PEOPLE. F ailure to follow this ca ...

  • Mitsubishi LCD4000 - page 12

    English-10 T o av oid falling down F asten the LCD monitor to wall or pillar with a cord or chain which is sufficient to suppor t the weight of the LCD monitor (appro x. 31.5kg). Bef ore moving the LCD monitor , the cord or chain should be remov ed. V entilation Requirements f or enclosure mounting T o allow heat to disperse , leave space between s ...

  • Mitsubishi LCD4000 - page 13

    English-11 English Hole of stand Claw of Monitor Stand Screw M5 x 40 How to install stand 1. Please turn monitor off. 2. Inser t claws of monitor to stand holes until clicks . 3. F asten 2 screws (M5 x 40) of both side. T orque 280 ~ 300N cm How to remo ve the stand 1. Spread the protective sheet on the flat surf ace, such as a desk. 2. Place monit ...

  • Mitsubishi LCD4000 - page 14

    English-12 Mounting P osition of Ferrite Core F errite Core T o connector of PC T o A UDIO 1 of monitor Attaching the Ferrite Core Attach the Ferrite Core to PC A udio Cable and S-VIDEO Cable. Use of the cable without mounting the f err ite core will result in the occurrence of noise. 1 Open the ferrite core and clamp it on the PC Audio cab le. 2 C ...

  • Mitsubishi LCD4000 - page 15

    English-13 English Connecting a P ersonal Computer Connecting your computer to y our LCD monitor will enable you to displa y your computer ’ s screen image. Some video cards may not be ab le to create a correct image resolution. Connect the LCD Monitor to a P ersonal Computer • T o connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD m ...

  • Mitsubishi LCD4000 - page 16

    English-14 Connecting your Macintosh ® computer to y our LCD monitor will enable y ou to display your computer ’ s screen image. Some video cards or drivers ma y not display images correctly . Connect the LCD Monitor to Macintosh ® • T o connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor , use the supplied PC - Video RGB si ...

  • Mitsubishi LCD4000 - page 17

    English-15 English LCD monitor Equipment with a digital interface such as a personal computer with RGB output (TMDS) D VI-D connector D VI-D connector T o D VI output T o audio output Connections can be made with equipment that is equipped with a digital interface compliant with the D VI (Digital Visual Interf ace) standard. Connect the LCD Monitor ...

  • Mitsubishi LCD4000 - page 18

    English-16 T o VIDEO IN BNC RCA VCR or Laser disc play er T o VIDEO IN LCD monitor (second monitor) BNC RCA DIN 4 pin DIN 4 pin T o VIDEO OUT T o S-VIDEO OUT LCD monitor T o audio right output Connecting your VCR or laser disc play er to your LCD monitor will enable y ou to display your VCR ’ s or laser disc play er ’ s video . Refer to y our V ...

  • Mitsubishi LCD4000 - page 19

    English-17 English Connecting your D VD pla yer to your LCD monitor will enab le you to display D VD video. Ref er to your D VD player user ’ s manual f or more inf ormation. Connect the LCD Monitor to a D VD Play er • T o connect the RGB 3 D VD/HD In connector (BNC) on the LCD monitor , use a separately av ailable BNC connector cable . Y ou wi ...

  • Mitsubishi LCD4000 - page 20

    English-18 Y ou can connect your stereo amplifier to your LCD monitor . Refer to y our amplifier user ’ s manual f or more information. Connect the LCD Monitor to a Stereo Amplifier • T urn on the LCD monitor and the amplifier only after all connections have been made . • Use an RCA cable to connect the A UDIO OUT connector (RCA) on the LCD m ...

  • Mitsubishi LCD4000 - page 21

    English-19 English Basic Operation P ower ON and OFF Modes The LCD monitor power indicator will turn green while pow ered on, or red when in off mode. The monitor can be powered on or off using the f ollowing three options: 1. Pressing the power b utton. Note: Bef ore operating the remote control, be sure to turn on the Main P ower Switch on LCD mo ...

  • Mitsubishi LCD4000 - page 22

    English-20 P ower Indicator Using P ower Management The LCD monitor follo ws the VESA appro ved DPMS P ower Management function. The power management function is an energy sa ving function that automatically reduces the power consumption of the display when the k eybord or the mouse has not been used for a fix ed period. Selecting a video source T ...

  • Mitsubishi LCD4000 - page 23

    English-21 English OSM (On-Screen-Manager) Contr ols - Computer Input Press UP or DOWN b utton to select sub-menu Press SET button to decide Press UP or DOWN, and PLUS or MINUS button to select function, or control which you lik e Press MENU or EXIT button to decide Remote Control Press UP or DOWN b utton to select Press INPUT button to decide Pres ...

  • Mitsubishi LCD4000 - page 24

    English-22 T o adjust the colour temperature of entire screen. COLOR Adjusting power colour temper ature make the screen TEMPERA TURE reddish and adjusting higher colour temperature make the screen bluish. Selecting Picture reset allows you to reset all OSM settings related to PICTURE. PICTURE RESET Select “ Y es ” and press “ SET ” button ...

  • Mitsubishi LCD4000 - page 25

    English-23 English Main-Menu PICTURE IN PICTURE Sub-Menu Selecting the size of picture inserted at the “ Picture-in Picture ” (PIP) mode. PIP SIZE “ Large ” , “ Middle ” , “ Small ” and “ REMOTE-PIP ” are av ailable. Selecting the sound source in PIP mode. When selecting “ MAIN A UDIO ” , you get the sound for the PIP A UDIO ...

  • Mitsubishi LCD4000 - page 26

    English-24 Selecting the power management ON/OFF mode . PO WER SA VE OSM control menus are av ailable in se ven languages. LANGU A GE In the OSM Time menu, you can select how long the OSM information will sta y after Display ke y push. OSM TIME A time between 3 and 30 seconds, is a vailable . T o select OFF TIMER mode ON/OFF . In the OFF TIMER menu ...

  • Mitsubishi LCD4000 - page 27

    English-25 English OSM (On-Screen-Manager) Contr ols - D VD&HD Input Main-Menu A UDIO Sub-Menu T o accentuate or quiet the high frequency sound. TREBLE Press + button to increase TREBLE sound. Press - button to decrease TREBLE sound. T o accentuate or quiet the low frequency sound. B ASS Press + button to increase BASS sound. Press - button to ...

  • Mitsubishi LCD4000 - page 28

    English-26 Main-Menu PICTURE IN PICTURE Sub-Menu Selecting the size of picture inserted at the “ Picture-in Picture ” (PIP) mode. PIP SIZE “ Large ” , “ Middle ” , and “ Small ” are av ailable. Selecting the sound source in PIP mode. When selecting “ MAIN A UDIO ” , you get the sound for the PIP A UDIO main picture and when sele ...

  • Mitsubishi LCD4000 - page 29

    English-27 English OSM (On-Screen-Manager) Contr ols - A V Input Main-Menu PICTURE Sub-Menu Adjusts the over all image and background screen brightness. BRIGHTNESS Press + button to increase brightness. Press - button to decrease brightness. Adjusts the image brightness in relation to the back ground CONTRAST Press + button to increase contrast. Pr ...

  • Mitsubishi LCD4000 - page 30

    English-28 Main-Menu A UDIO Sub-Menu T o accentuate or quiet the high frequency sound. TREBLE Press + button to increase TREBLE sound. Press - button to decrease TREBLE sound. T o accentuate or quiet the low frequency sound. BASS Press + b utton to increase BASS sound. Press - button to decrease BASS sound. Selecting A udio reset allows you to rese ...

  • Mitsubishi LCD4000 - page 31

    English-29 English T o select OFF TIMER mode ON/OFF . OFF TIMER In the OFF TIMER menu, you can select monitor auto turn off time after monitor has been tur ned on. A time between 1 and 24 hours, is a vailable . T o select SCREEN SA VER mode, select ON/OFF . SCREEN SA VER Selecting the colour system depending on your input video format. NTSC is auto ...

  • Mitsubishi LCD4000 - page 32

    English-30 Contr olling the LCD monitor via RS-232C Remote Control This LCD monitor can be remote controlled by connecting a computer with RS-232C interf ace. The follo wing functions can be controlled by a computer : • T urn the monitor ON or OFF . • Changing input signals. Connection LCD Monitor + IBM PC or IBM PC compatible NO TE: If your PC ...

  • Mitsubishi LCD4000 - page 33

    English-31 English 3) Control sequence (1) The command from a computer to the LCD monitor will be sent within 400ms. (2) The LCD monitor will send a return command 400ms* after it has received and e x ecuted a code. If the command isn ’ t received correctly , the LCD monitor will not send the return command. (3) The computer checks the command an ...

  • Mitsubishi LCD4000 - page 34

    English-32 Features Reduced Footprint: Provides the ideal solution f or environments requiring superior image quality but with size and weight limitations. The monitor ’ s small footprint and low weight allow it to be mo v ed or transpor ted easily from one location to another . Colour Control Systems: Six colour presets select the desired colour ...

  • Mitsubishi LCD4000 - page 35

    English-33 English T r oubleshooting No picture • The signal cable should be completely connected to the displa y card/computer. • The display card should be completely seated in its slot. • F ront P ower Switch and computer po wer switch should be in the ON position. • Check to mak e sure that a suppor ted mode has been selected on the dis ...

  • Mitsubishi LCD4000 - page 36

    English-34 Specifications f or LCD4000 Product Specifications Analog Input Digital Input LCD Module (40" / 101.6cm diagonal) Pixel Pitch: 0.681mm Resolution: 1280 x 768 dots (WXGA) Colour : 16,777,216 Brightness: 450cd/m 2 (T yp.) Viewing Angle: Up 85 ° / Down 85 ° / Left 85 ° / Right 85 ° (typ) @ CR>10 External speaker out put inpedanc ...

  • Mitsubishi LCD4000 - page 37

    English-35 English Pin Assignment 1) Analog RGB input (MiniDsub15p): R G B 2 Pin No Name 1 Video Signal Red 2 Video Signal Green 3 Video Signal Blue 4 GND 5 DDC-GND 6 Red-GND 7 Green-GND 8 Blue-GND 9N C 10 SYNC-GND 11 GND 12 DDC-SD A 13 H-SYNC 14 V -SYNC 15 DDC-SCL 2) S-VIDEO input: V I D E O Pin No Name 1 GND 2 GND 3 Y (Luminance) 4 C (Chroma) 3) ...

メーカー Mitsubishi カテゴリー Computer Monitor

Mitsubishi LCD4000のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- LCD4000の取扱説明書
- Mitsubishiの製品カード
- パンフレット
- またはMitsubishi LCD4000の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Mitsubishi LCD4000の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Mitsubishi LCD4000の取り付け説明書、サービスマニュアル、簡易説明書、またはMitsubishi LCD4000のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Mitsubishi LCD4000の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Mitsubishi LCD4000デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMitsubishi LCD4000を使用するのを助ける技術的文書のことです。説明書は通常、全てのMitsubishi LCD4000ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Mitsubishiの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Mitsubishi LCD4000の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMitsubishi LCD4000の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Mitsubishi LCD4000に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Mitsubishi LCD4000デバイスの基本機能を使うにあたってのヒント。 Mitsubishi LCD4000のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Mitsubishi LCD4000に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMitsubishi LCD4000のメーカー/サービスへの連絡先に関する情報。

Mitsubishi LCD4000についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもMitsubishi LCD4000の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMitsubishi LCD4000で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)