Perle Systems C-110-XXXXXの取扱説明書

20ページ 0.14 mb
ダウンロード

ページに移動 of 20

Summary
  • Perle Systems C-110-XXXXX - page 1

    P/N 5500307-15 Perle 10/100 Ethernet Media Convert er Module Installation Guide C-110-XX XXX Unm anaged Module CM-110-XX XXX Managed Modu le ...

  • Perle Systems C-110-XXXXX - page 2

    Perle 10/100 Media Converter M odule – Installation Guide 2 Over vie w This docum ent contains instructions n ecessar y for the instal lation and operation of the Perle 10/1 00 Ethernet M edia Con verter Modul e(s) (C- 110 and CM-11 0) that are us ed in conjunc tion with a P erle MCR Ch assis. The C- 110 are unm anaged m edia converter m odules, ...

  • Perle Systems C-110-XXXXX - page 3

    Perle 10/100 Media Converter M odule – Installation Guide 3 Installatio n The m odule comes equi pped with a ba nk of DIP switches an d jum pers for setting conf iguration. The default d ip switch set tings (all s witches in the UP position) and default jum per settings will work for mos t installations. The f ollowing steps are used to co nfigur ...

  • Perle Systems C-110-XXXXX - page 4

    Perle 10/100 Media Converter M odule – Installation Guide 4 Auto-Config Jumper (CM-110 only ) The Auto-Co nfig jum per (J6) is located jus t belo w the Auto-MDIX jumper ( see above). Ref er to the diagram below f or labelling. T his jumper onl y applies to CM- 110 m odules. Strapping p ins 1 and 2 of the jum per will set the m odule in SW m ode a ...

  • Perle Systems C-110-XXXXX - page 5

    Perle 10/100 Media Converter M odule – Installation Guide 5 DIP Switches DIP Switch Settings Auto Negoti ation (Sw itch 1) Switch Posit ion Mode Up (defau lt) Auto Down Off Note: Auto ne gotiation s hould onl y be turned of f, if the copper link partner does n ot support Auto Negot iation or fix ed settings ar e required b y the copper link partn ...

  • Perle Systems C-110-XXXXX - page 6

    Perle 10/100 Media Converter M odule – Installation Guide 6 Converter M odule will be determ ined by the Du plex (switch 4) and Speed (s witch 5) dip s witch settings . Link M ode (Switch 2) Switch Posit ion Mode Up (defau lt) Link Pass- Through Mode Down Standard Mo de Link Pass-T hrough: In this mode, the l ink state on one connec tion is direc ...

  • Perle Systems C-110-XXXXX - page 7

    Perle 10/100 Media Converter M odule – Installation Guide 7 fiber link on either the tra nsm it or receive line will b e passed throu gh to the local co pper connec tion thus notifying the c onnected de vice. If the Media C onverter has been set to Link Pass -Through m ode, the effec t will be the sam e as FEF, since the link loss on the fiber re ...

  • Perle Systems C-110-XXXXX - page 8

    Perle 10/100 Media Converter M odule – Installation Guide 8 Duplex (copp er) (Sw itch 4) Switch Posit ion Mode Up (defau lt) Full Down Half Note: W hen Auto Negoti ation (SW 1) is set to Of f, the Media Converter will use this D uplex settin g for its copp er connectio n. Up: T he Media Converter Module wi ll be set to Fu ll Duplex m ode. Dow n: ...

  • Perle Systems C-110-XXXXX - page 9

    Perle 10/100 Media Converter M odule – Installation Guide 9 Duplex (fiber) ( Swit ch 6) Switch Posit ion Mode Up (defau lt) Full Down Half Up: T he Media Converter Module’s f iber link wil l be set to F ull Duplex Mode. Dow n: The Media Conv erter Module’s f iber will be s et to Half D uplex Mode. Loopback (Sw itch 7 Switch Pos ition Mode Up ...

  • Perle Systems C-110-XXXXX - page 10

    Perle 10/100 Media Converter M odule – Installation Guide 10 Installing or Replacing Media Converter Modules Caution: O bserve electro static dis charge precau tions wh en installing the Media Con verter Module(s) into th e Chassis. Failure to obs erve this caution co uld result in d amage to t he Media Convert er M odul e(s) and /o r chassis. Th ...

  • Perle Systems C-110-XXXXX - page 11

    Perle 10/100 Media Converter M odule – Installation Guide 11 6. Tighten the ca ptive retai ner scr ew to ensure the Me dia Converter M odule is loc ked in place . 7. Rem ove the dust cap f rom the fiber c onnector and connect th e fiber and copp er cables . Removing Media Convert Modules 1. Loosen the c aptive retain er screw on th e front of the ...

  • Perle Systems C-110-XXXXX - page 12

    Perle 10/100 Media Converter M odule – Installation Guide 12 • Connect the fiber cable f rom one Medi a Converter M odule to the other Media C onverter/s witch/f iber device. Installing the Copper Cable • Locate 10/100 Base-T compliant copper c ables with male, RJ- 45 connectors installed at both ends . • Connect the RJ-45 cable between th ...

  • Perle Systems C-110-XXXXX - page 13

    Perle 10/100 Media Converter M odule – Installation Guide 13 Operation Status LED The Perle 10/ 100 Etherne t Media C onverter Mod ules have six s ingle color status LEDs located on t he face plate of the m odule. PWR On – Power is on; mod ule is operating normal ly Blinking (slow ) – The module is in Loopback mode . Blinking (fast) – The m ...

  • Perle Systems C-110-XXXXX - page 14

    Perle 10/100 Media Converter M odule – Installation Guide 14 Other Features Auto-M DIX: Auto-MDIX ( autom atic medium- dependant interf ace crossover) detects the s ignalling on the 10/100 BASE-T interface to det erm ine the type of c able connec ted (straight-thr ough or cros sover) and automatical ly configures t he conn ection. Error Recov ery ...

  • Perle Systems C-110-XXXXX - page 15

    Perle 10/100 Media Converter M odule – Installation Guide 15 Troubleshooting General • Ensure that the Me dia Converter Module is s ecurely s eated in the chassis. T he PWR LED s hould be on. • Ensure both devices on either end of the fib er are com patible. If using a sim plex fiber con nection, ens ure that you have both an Upstream (U) and ...

  • Perle Systems C-110-XXXXX - page 16

    Perle 10/100 Media Converter M odule – Installation Guide 16 Method 2: The f iber connection ca n also be verified b y configuring the r emote Media Con verter for loop back m ode. The LKF L EDs on both Media Con verters should be lit. Data s hould pas s through t he local converter, o ver the fiber co nnection to th e rem ote Media Converter. At ...

  • Perle Systems C-110-XXXXX - page 17

    Perle 10/100 Media Converter M odule – Installation Guide 17 Technical Specifications Power Inpu t/Consumpt ion 12V DC / 2.1 W Operating T emperatur e: 0 °C to 50 °C (32 °F to 122 ° F) Storage Tem perature: - 25 °C to 70 °C (-13 °F to 15 8 °F) Operating Hu midity: 5% to 90% non-condensing Storage Hum idity: 5% to 95% non-condensing Operat ...

  • Perle Systems C-110-XXXXX - page 18

    Perle 10/100 Media Converter M odule – Installation Guide 18 C-110-S2ST120 CM-110-S2ST120 S M TX: 1550 RX: 1550 M in: 0 Max: 5 Min: -35 Max: 0 35 C-110-S2LC120 CM-110-S2LC120 SM TX: 15 50 RX: 1550 M in: 0 Max: 5 Min: -35 Max: -3 35 C-110-S1SC20U CM-110-S1SC20U SM TX: 1310 RX: 1550 M in: -14 Max: -8 Min: -32 Max: -3 18 C-110-S1SC20D CM-110-S1SC20D ...

  • Perle Systems C-110-XXXXX - page 19

    Perle 10/100 Media Converter M odule – Installation Guide 19 Compliance Information FCC This product has been found to comply with the li mits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against har mful interference when the equip ment is operated in a commercial ...

  • Perle Systems C-110-XXXXX - page 20

    Perle 10/100 Media Converter M odule – Installation Guide 20 Warranty / Reg istration Perle’s stan dard Lifetim e Warrant y provides cus tomers with r eturn to factor y repa irs for Perle products that fail under the condit ions of the warrant y coverage. Detai ls can be fou nd at: http://www.pe rle.com/support_services/warrant y .shtml Contact ...

メーカー Perle Systems カテゴリー Network Card

Perle Systems C-110-XXXXXのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- C-110-XXXXXの取扱説明書
- Perle Systemsの製品カード
- パンフレット
- またはPerle Systems C-110-XXXXXの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Perle Systems C-110-XXXXXの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Perle Systems C-110-XXXXXの取り付け説明書、サービスマニュアル、簡易説明書、またはPerle Systems C-110-XXXXXのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Perle Systems C-110-XXXXXの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Perle Systems C-110-XXXXXデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPerle Systems C-110-XXXXXを使用するのを助ける技術的文書のことです。説明書は通常、全てのPerle Systems C-110-XXXXXユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Perle Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Perle Systems C-110-XXXXXの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPerle Systems C-110-XXXXXの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Perle Systems C-110-XXXXXに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Perle Systems C-110-XXXXXデバイスの基本機能を使うにあたってのヒント。 Perle Systems C-110-XXXXXのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Perle Systems C-110-XXXXXに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPerle Systems C-110-XXXXXのメーカー/サービスへの連絡先に関する情報。

Perle Systems C-110-XXXXXについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもPerle Systems C-110-XXXXXの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPerle Systems C-110-XXXXXで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)