-
Napco Security Technologies GEM-RP3DGTL - page 1
1 OPER ATING GUIDE for your GEM-RP3DGTL KEY PAD © NAPCO 1999 DESIGN PATS. PENDING R COMPUTERIZED SECURITY SYSTEM ARMED STATUS SYSTEM ARMED SYSTEM ARMED 01/01/97 12:00AM 01/01/97 12:00AM 1 2 4 3 5 6 7 8 9 0 A B C D E F G NEXT/YES PRIOR/NO AREA GEMINI ENT A1 ENT A1 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME 96 GEM-RP3DGTL.pub page 1 Wednesday, August 18 ...
-
Napco Security Technologies GEM-RP3DGTL - page 2
2 The GEM-RP3DGTL is a “ smart ”, in- teractive, menu-driven keypad de- signed for your Napco control panel. A digital display is provided to show the status of your system. This booklet contains important infor- mation about the operation of your sys- tem with this GEM-RP3DGTL Keypad. Read it carefully and keep it handy for future reference. C ...
-
Napco Security Technologies GEM-RP3DGTL - page 3
3 TABLE OF CONTENT S TABLE OF CONTENTS Section Page KEYPAD CONTROLS & INDICATORS .......................................................... 5 SETTING THE ALARM (ARMING) WHEN LEAVING .................................... 6 PROTECTING YOURSELF WHILE ON THE PREMISES ............................. 8 TURNING OFF THE ALARM (DISARMING) WHEN RETURNING .. ...
-
Napco Security Technologies GEM-RP3DGTL - page 4
4 KEYPAD CONTROLS & INDICATOR S R COMPUTERIZED SECURITY SYSTEM ARMED STATUS SYSTEM ARMED SYSTEM ARMED 01/01/97 12:00AM 01/01/97 12:00AM 1 2 4 3 5 6 7 8 9 0 A B C D E F G NEXT/YES PRIOR/NO AREA GEMINI ENT A1 ENT A1 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME 1 2 3 4 5 6 12 7 8 9 10 11 13 96 GEM-RP3DGTL.pub page 4 Wednesday, August 18, 1999 14:03 ...
-
Napco Security Technologies GEM-RP3DGTL - page 5
5 KEYPAD CONTROLS & INDICATOR S Window. Window. Lights indicate system status messages; digit display indicates related zone, function or er- ror message numbers. STATUS Light. Lights (green) to indi- cate that the system is ready for arm- ing. If a zone is not secured, the light will be off and the zone will display in the window. If a zone ha ...
-
Napco Security Technologies GEM-RP3DGTL - page 6
6 SETTING THE ALARM (ARMING) WHEN LEAVIN G 1. Check the keypad. The green STATUS light must be on in order to arm. • If the green light is off , the number(s) of any unsecured zone(s) will display in the window. Note each problem zone and secure it by closing a window, door, etc. When all zones are secure, the green STATUS light will come on. • ...
-
Napco Security Technologies GEM-RP3DGTL - page 7
7 SETTING THE ALARM (ARMING) WHEN LEAVIN G If you attempt to arm with a system trouble, a 3-second tone will sound at the keypad. (See SYSTEM TROUBLE ERROR CODES for descriptions of codes.) The window will display “P”. If you cannot correct the problem immediately, pressing the C button will enable you to arm in this condition. Be sure to call ...
-
Napco Security Technologies GEM-RP3DGTL - page 8
8 PROTECTING YOURSELF WHILE ON THE PREMISE S Bypassing Interior Zone s Interior Zones, when bypassed, allow free movement within the premises while the protection of armed perimeter zones is maintained. If the E button is pressed, all Interior Zones will be bypassed upon arming. Some control panels have provisions for two groups of Interior Zones. ...
-
Napco Security Technologies GEM-RP3DGTL - page 9
9 PROTECTING YOURSELF WHILE ON THE PREMISE S Emergency Buttons (Only available if programmed ) The Blue Emergency Buttons (F, A and P), if programmed, are always active, whether the system is armed or disarmed. The emer- gency signal will only be activated when the respective Emergency Button and the G button are pressed at the same time. • Fire ...
-
Napco Security Technologies GEM-RP3DGTL - page 10
10 TURNING OFF THE ALARM (DISARMING) WHEN RETURNIN G 1. Upon entry, the red ARMED light will be on and the keypad sounder will come on as a reminder to disarm the panel. During the final 10 seconds, the sounder will pulse a warning signal. 2. Immediately enter your code, then press the J button. The sounder will silence and the red ARMED light will ...
-
Napco Security Technologies GEM-RP3DGTL - page 11
11 TURNING OFF THE ALARM (DISARMING) WHEN RETURNIN G Ambush (Ambush programmed? YES NO. ) The Ambush Code (optional) is a 2-digit code that is entered just prior to your Disarm Code. If an intruder forces you to disarm your system, (a) enter your Ambush Code; (b) enter your Disarm Code; (c) press the J button. Example: If your regular Arm/Disarm Co ...
-
Napco Security Technologies GEM-RP3DGTL - page 12
12 FIRE PROTECTIO N (Applicable only where local ordinance permits use of this alarm control panel for fire protection.) Fire-Zone Alar m If a fire is detected, the “FIRE TBL” light will display with the zone number and the keypad sounder will pulse. 1. If a fire is in progress, evacuate the premises immediately! If necessary, call the Fire Dep ...
-
Napco Security Technologies GEM-RP3DGTL - page 13
13 FIRE PROTECTIO N Preparing a Fire Escape Pla n Even with the most advanced fire alarm system, adequate protection re- quires an escape plan. To prepare your plan, draw floor plans of your building. (Space is pro- vided on the next page.) Show two exits - a front or back door and a window from each room. (Make sure the window works. You may need ...
-
Napco Security Technologies GEM-RP3DGTL - page 14
14 FIRE PROTECTIO N Floorpla n Draw a plan of your premises in the space provided below. Floorplan GEM-RP3DGTL.pub page 14 Wednesday, August 18, 1999 14:03 ...
-
Napco Security Technologies GEM-RP3DGTL - page 15
15 FIRE PROTECTIO N Although a fire alarm system may be of a reliable and state-of- the-art design, neither it nor its peripheral detection devices can offer guaranteed protection against fire. Any such equipment may fail to warn for a variety of reasons: • Control panels, communicators, dialers, smoke detectors, and many other sensing de- vices ...
-
Napco Security Technologies GEM-RP3DGTL - page 16
16 KEYPAD FUNCTION S The keypad can provide a wide assortment of utility functions. The functions are displayed in a prompting “yes/no” format. To skip a function, answer NO (press the F button); to select and execute a function, answer YES (press the E button or press the J button). Note: Functions may be manually scrolled forward or backward ...
-
Napco Security Technologies GEM-RP3DGTL - page 17
17 KEYPAD FUNCTION S 4. Display System Troubles? Displays a 1- or 2-digit error code representing a problem detected in the system. (See SYSTEM TROUBLE ERROR CODES for a description of these codes.) Use NEXT and PRIOR Buttons to scroll system troubles. 5. Display Fire Alarms? Displays alarms that have occurred on the Fire Zone(s). Press the NEXT an ...
-
Napco Security Technologies GEM-RP3DGTL - page 18
18 KEYPAD FUNCTION S 9. Reset System Trouble? System troubles display and sound at the keypad. Correcting the trouble will clear most indications, however the following error codes will require manual reset: E11; E13; E19; E20 and E22. (See SYSTEM TROUBLE ERROR CODES for a description of error codes.) 10. For installer's use only. If accidenta ...
-
Napco Security Technologies GEM-RP3DGTL - page 19
19 KEYPAD FUNCTION S 14. Activate EZM Zone Find? For installer's use only. If accidentally enabled, press the C button to exit. 15. Activate Telephone Test? (Telephone Test programmed? YES NO.) Sends a communicator test to the central station. A communication failure will be indicated at the keypad by a system trouble “3” display. Repeat t ...
-
Napco Security Technologies GEM-RP3DGTL - page 20
20 KEYPAD FUNCTION S 17. Activate Program? (Program Mode programmed for user? YES NO.) Activates the Program Mode from Keypad No. 1 only. Note: This feature is disabled while armed. 18. Activate Download? For installer's use only. If accidentally enabled, press the C button to exit. Note: This feature is disabled while armed. 19. Relay Control ...
-
Napco Security Technologies GEM-RP3DGTL - page 21
21 Your alarm specialist may have programmed your system to be moni- tored by a central station. The built-in digital communicator can transmit emergency signals and status reports to the central station 24 hours a day. Communicator Feature s Abort Delay. Ask your installer which of your zones have abort delay, a delay that enables you to reset the ...
-
Napco Security Technologies GEM-RP3DGTL - page 22
22 ADVANCED FEATURE S Security Bypass/Unbypas s (Security Bypass programmed? YES NO.) In high-security applications, zones may be bypassed (or unbypassed) only if a valid code is entered first, as follows: + 1. Enter a code valid for bypass, then press the B button. + 2. Press the B button then the zone number (or vice versa) to deactivate that zon ...
-
Napco Security Technologies GEM-RP3DGTL - page 23
23 ADVANCED FEATURE S Start Exit Time After Ringback (for Commercial Burglary Systems only ) (Start Exit Time programmed? YES NO.) If your system reports to a central station, your panel may have been programmed to start exit delay after the central-station ringback (verification) signal. Then, after arming, your system will communicate to the cent ...
-
Napco Security Technologies GEM-RP3DGTL - page 24
24 PROGRAMMING (OPTIONAL ) Introductio n The Program Mode (optional) is used to customize User Codes. Access to the Program Mode requires a special User Code, therefore not all users may have the ability to program. Note: • If the system contains more than one keypad, only the keypad desig- nated “No. 1” may be used for pro- gramming (if in d ...
-
Napco Security Technologies GEM-RP3DGTL - page 25
25 PROGRAMMING (OPTIONAL ) 6. Continuing, set the cursor to the user code with the A button and enter the new User Code using the number but- tons. Press G0 for any blank loca- tions until you end up back to the flashing “UP”. 7. Press the J button to save the code in memory. Repeat Steps 4 through 7 for each user. Note: To void a code, simply ...
-
Napco Security Technologies GEM-RP3DGTL - page 26
26 GLOSSAR Y Following are brief descriptions of terms and features used herein that may be unfamiliar to you. Some of the features are programmable options that may or may not apply to your particular system. Abort Delay - A delay period that allows the control panel to be reset, thus aborting a report to a central sta- tion. Access Code - A code ...
-
Napco Security Technologies GEM-RP3DGTL - page 27
27 GLOSSAR Y Manager's Mode - In a partitioned system, a low-security operating mode that allows arming by area. Panic Buttons - Blue buttons on the keypad ( G and 7 , 8 or 9 ). If enabled, pressing G to- gether with 7 , 8 or 9 will alert the central station of a fire, auxil- iary, or police emergency. Partitioned System - A system that has be ...
-
Napco Security Technologies GEM-RP3DGTL - page 28
28 GLOSSAR Y • Exit/Entry Follower Zone: Pro- vides exit and entry delay for inte- rior devices. Entry delay only oc- curs if re-entry takes place through the normal exit/entry door first. • Fire Zone: Detects fire alarms or trouble conditions. • Interior Zones: Circuits within the premises, usually including space-protection devices, interio ...
-
Napco Security Technologies GEM-RP3DGTL - page 29
29 SYSTEM TROUBLE ERROR CODE S E01-00 AC power failure. E02-00 System low battery. E03-00 Communication failure. E04-NN RF transmitter supervisory Failure; NN = transmitter number. E05-NN RF transmitter low battery condition; NN = transmitter number. E06-NN Receiver response failure; NN = receiver number. E07-00 Download failure. E08-00 Telephone l ...
-
Napco Security Technologies GEM-RP3DGTL - page 30
30 NOTE S GEM-RP3DGTL.pub page 30 Wednesday, August 18, 1999 14:03 ...
-
Napco Security Technologies GEM-RP3DGTL - page 31
31 NOTE S GEM-RP3DGTL.pub page 31 Wednesday, August 18, 1999 14:03 ...
-
Napco Security Technologies GEM-RP3DGTL - page 32
32 NAPCO LIMITED WARRANTY THE FOLLOWING STATEMENT IS REQUIRED BY THE FCC . This equipment generates and uses radio-frequency energy and, if not installed and used properly, that is, in strict accordance with the manufacturer's instructions, may cause interference to radio and television reception. It has been type tested and found to comply wi ...
Napco Security Technologies GEM-RP3DGTLについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもNapco Security Technologies GEM-RP3DGTLの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNapco Security Technologies GEM-RP3DGTLで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。