-
O'Neil 2TE - page 1
User's Guide MICROFLASH 2T e ...
-
O'Neil 2TE - page 2
T ABLE OF C ONTENTS microFlash 2t e Printer: Top View .......... ...... 1 Using the Batter y: General Guidelines ........ 2 Charging the Battery ................ .......... ......... 2 Determining Battery Conditio n ........ ........... .. 2 Installing Paper ......... .......... ........ ........ ......... 3 Printing a Self-Test .......... ........ ...
-
O'Neil 2TE - page 3
MICROFLASH 2T e PRINTER USER'S GUIDE 1 microFlash 2t e Printer: Top View Charge LED Pap e r / Pa pe r Cavity Data P ort Rol l er Self - T est Button Print Head Rel ea s e L e ve r RF P ower LED Power P ort Figure 1 Figure 2 ON/OFF Status LED Latch LEDs NOTE: When the cable plug is inserted into the P ower Po rt, the cable plug must lay hori zo ...
-
O'Neil 2TE - page 4
MICROFLASH 2T e PRINTER USER'S GUIDE 2 Using the Battery: General Guidelines If the printer has not been used for a long period of time, it may be necessary to recharge the batte ry . For more information, see Chargi ng the Batt ery on page 2 . Charging the Battery If the battery is low when the printer “wakes up, ” the printer sounds thre ...
-
O'Neil 2TE - page 5
MICROFLASH 2T e PRINTER USER'S GUIDE 3 Installing Paper 1. Insert a roll of paper with the end of the roll exiting from the bot tom of the pape r cavity (Figur e 3). 2. Open the print head by raising the green, print head release lever until it stops (Figure 4). 3. W ake up the printer by briefly pressing the gr een, self -test butto n (Figu r ...
-
O'Neil 2TE - page 6
MICROFLASH 2T e PRINTER USER'S GUIDE 4 4. Feed the end of the paper under the rol ler . The paper automatically feeds under the roller and exits from the t op of the print he ad. V erify the paper exits straight. 5. Lower the green, print head release lever (Figure 6). 6. Fe ed the paper through the printer's cov er (Figure 7). 7 . Close ...
-
O'Neil 2TE - page 7
MICROFLASH 2T e PRINTER USER'S GUIDE 5 Clearing Linerless Paper Jams A paper jam may occur if an O’Neil printer with linerless paper installed is left in a cold environment without being used for an extended period of time (such as overnig ht). Removing a Paper Jam 1. Open the print head by raising the print head release lever until it is fu ...
-
O'Neil 2TE - page 8
MICROFLASH 2T e PRINTER USER'S GUIDE 6 Remo ve the Linerless Paper fr om the Print Head If the printer is going to be in a cold environment for a long period of time, remove the linerless paper from the print head. The paper can remain in the printer . Advance the P aper When the printer is turne d on, hold the paper and then advance the paper ...
-
O'Neil 2TE - page 9
MICROFLASH 2T e PRINTER USER'S GUIDE 7 Using Prin ter Data Cables 1. Select the appropriate cable f or use with the host/ device you are using . 2. Insert the plug into the printer data port (Figur e 12). 3. Lead the cable thr ough the notch on the ou tside of the printer cover . 4. With the cable exiting t he fr ont of the print er , close an ...
-
O'Neil 2TE - page 10
MICROFLASH 2T e PRINTER USER'S GUIDE 8 Note: When closing the prin ter , be ca utious of the cable that is exiting to prev ent pinching of the cable. Remove the cable when the pr inter is not in use. Figure 13 ...
-
O'Neil 2TE - page 11
MICROFLASH 2T e PRINTER USER'S GUIDE 9 Using Blueto oth Radio printers are configured with def ault factory settings. T o determine your printer's radio configuration, print a self -test. (F or more information, see Printing a Self - T est on page 4 . ) If you have multiple printers, configure th em specifically for use in your envir onme ...
-
O'Neil 2TE - page 12
MICROFLASH 2T e PRINTER USER'S GUIDE 10 Using Buttons, LEDs, and Audio Indicators Button Functions LED Indicators Bluetooth LED Indicators Green Self-Test Button Short press If printer is asleep; printer wakes up. If printer is awak e; paper fee ds. Long press (press and hold for five seconds) Prints a self -test. Bluetooth Power Button Short ...
-
O'Neil 2TE - page 13
MICROFLASH 2T e PRINTER USER'S GUIDE 11 Charge LED Indicators Power LED Indicato rs LED State of Charge Action Flashing Orange Flashing Red Charge in progress . W ait for the cha rge LED to turn green. Green Charge complete. None. Red f la s h - slow Battery is too cold. Change environment. Red f la s h - fast High temperature. Change environm ...
-
O'Neil 2TE - page 14
MICROFLASH 2T e PRINTER USER'S GUIDE 12 Audio Indicators CardReader Audio Indicators Beep(s) Description Action 1P r i n t e r w a k e s u p . N o n e . 2 Out of paper . Install paper . 3 Low battery . Charge battery . 1 short RF power is on (when blue, RF power but ton is pressed and power w as turned off ). None. 2 short RF power is off (whe ...
-
O'Neil 2TE - page 15
MICROFLASH 2T e PRINTER USER'S GUIDE 13 Using a CardReader General Guidelines T o use the CardReader , swipe a card with the stripe facing toward the printe r , then slowly move the card left or right in the CardR eader slot. Fo r information on Ca rdRe ader LED indicators and audio indicators, see Using Buttons, LEDs, and Audio Indicators on ...
-
O'Neil 2TE - page 16
MICROFLASH 2T e PRINTER USER'S GUIDE 14 Agency Approvals FCC Notice This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmf ul interference in a residentia l installation. This equipment genera ...
-
O'Neil 2TE - page 17
MICROFLASH 2T e PRINTER USER'S GUIDE 15 Applicable Di rective • 89/336/EEC, 73/23/EEC Applicable Standards • EN55022 (1998) • EN55024 (1998) • EN60950 (1992) ...
-
O'Neil 2TE - page 18
MICROFLASH 2T e PRINTER USER'S GUIDE 16 ...
-
O'Neil 2TE - page 19
MICROFLASH 2T e PRINTER USER'S GUIDE 17 Copyright This manual and an y examples co ntain ed her e in ar e pr o vi ded “as is” and are subject to change withou t notice. O’Neil P roduct Development, I nc. makes no w arrant y of any ki nd with regard to this manual, incl ud in g, but not limited to , th e impli ed warr an ties of merchanta ...
-
O'Neil 2TE - page 20
MICROFLASH 2T e PRINTER USER'S GUIDE 18 Media Supplies O'Neil Product Dev elopment, In c. off ers seven certified grades of paper fo r use in the printers. Our certified supplies are guaranteed compatible — this important qualification means that rigorous performa nce and image life testing have been perf ormed. Quality supplies are key ...
-
O'Neil 2TE - page 21
...
-
O'Neil 2TE - page 22
W orld Headquarters O'Neil Product Development 8 Mason Irvine, CA 92618-2705 Ph: 949.458.0500 Fx: 949.458.0708 Europe 6 Joplin Court, Crownhill Milton Keynes MK8 0JP United Kingdom Ph: +44 (0) 1908 635360 Fx: +44 (0) 1908 635361 WWW .ONEILPRINTERS.COM COPYRIGHT © 2008, O’NEIL PRODUCT DEVELOPMENT , INC. Part Number 110228-001, April 2008, Ma ...
O'Neil 2TEについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもO'Neil 2TEの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがO'Neil 2TEで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。